User's Guide

12
2.6.1 Phone power on/off
Power on
Press and hold power to turn on the phone. If PIN code is required,
please refer to the previous section in this guide.
Power off
In Standby mode, press power key to turn off the phone.
2.6.2 Dial
When the network carrier is shown on the screen, your phone has
entered the Standby mode and you may make or receive calls. If
you have installed two SIM cards, the two network carriers will
both appear on the screen.
2.6.3 Direct dial
Press any number key to enter the Dial screen.
Domestic call
Press number key to entering the phone number (add area code
when calling long distance), and then press the dial key Send to
make the phone call.
Note:
 In single card mode, Send will dial out to the one card.
 In dual card mode, Send will dial out with card 1or card 2.
The screen will show the name and phone number of the person
that you are calling. After the call goes through, the screen will
show a time meter in addition to the phone number and/or the
name of the person you are calling.
International call
Key in the symbol “+” by press-and-hold *Key, followed by the
desired country code and the phone number. For example, to
make a call to France, hold *Key until “+” appears then enter “33”
(the country code for France) and the phone number.