User's Guide
8
Should there be an emergency situation, contact crew member.
2. Getting Started
2.1Batteries
The battery is included in the package. It is not fully charged out of
factory but it may still be able to power on your phone. Please
completely use up the power of the battery and then charge it for at
least 12 hours with your phone turned off. You battery will reach its
optimal state after three cycles of charge and discharge.
2.1.1 Installing and uninstalling the battery
To install the battery, remove the back cover from the phone by
pressing firmly on the cover and slide it down. Align the golden
contacts of the battery to the contacts in the phone, and then
gently snap down the battery into place. Re-assemble the back
cover.
To uninstall the battery, flip the battery out from the bottom of the
battery.
2.1.2 Charging the battery
Plug the charger into the socket on the side of your phone.
Connect the charger to an AC wall socket. The blinking of the
battery level icon indicates the battery is being charged. When the
blinking stops, it indicates the charging is finished
During charging, the phone and charger will feel warm to the touch.
This is normal.
Warning:
The operating ambient temperature of the charger is 0C-50C.
Do not use it when the temperature exceeds this limit.
Use only chargers approved by the phone manufacturer to
ensure safety. Failing to comply with this will violate the terms
and conditions of the warranty.