Owner's Manual

11
9. PAIRING BUTTON
Used to pair and unpair devices from SmartLink. If the button is held for 10
seconds, all paired devices will be forgotten by the SmartLink.
NOTE: SmartConnect devices are not forgotten when holding down the pairing
button. They must be unpaired using the ProSmart App.
10. WIRED TEMPERATURE SENSOR CONNECTIONS
Used to connect the included BMPRO wired temperature sensor.
11. 12V INPUT CONNECTION
Used to connect a 12V power source to the SmartLink.
8. PAIRING LED
LED indicator which shows status when pairing or unpairing.
STATE LED STATUS
Initialisation Flashing white and yellow
Pairing Flashing blue
The maximum of four devices has
been reached
Flashing amber-green
All devices have been forgotten Flashes red once