Owner's Manual

Press OK to attempt pairing again.

If the SmartSense sensor continues to fail to pair:

9 Move the propane tank and sensor closer to the SmartLink.

9 Check the sensor battery level.

Refer to the BATTERY REPLACEMENT section to check the battery level of the

sensor and for instructions on battery replacement.

SENSOR READING NOT DETECTED

If a valid reading is not detected, the gas reading will show as 0.

In this situation:

9 Quickly press the orange sync button on the sensor 6 times to wake it

9 Wait for the sensor to send the information

9 Check the sensor battery level

9 Move the propane tank and sensor closer to your SmartLink.

UNPAIRING SMARTSENSE SENSORS

To unpair SmartSense sensors:

1. Go to the Your Sensors page.

2. On the SmartSense sensor you want to unpair, press the bin icon.

SMARTSENSE PAIRING UNSUCCESSFUL

If pairing is unsuccessful, a message will appear stating “Sensor Not Paired”.