Owner's Manual

30
BATTERY REPLACEMENT
The monitoring system displays battery level information to help you know when
you need to change the batteries of your SmartConnect devices.
To check if any SmartConnect sensor batteries need to be changed, check
the battery icon on the sensor in the home screen. The icon will indicate if the
battery is low or not.
If the battery is low, it will need to be replaced.
REPLACING SMARTPRESSURE SENSOR BATTERIES
SmartPressure sensor batteries can be replaced by following the below
instructions:
1. Remove the sensor.
2. Loosen the sensor housing with a wrench.
3. Open the outer case of the sensor.
4. Replace the battery.
If you are replacing multiple SmartPressure batteries at once, take care not to
mix them up to avoid installing the wrong sensor.