Manual Owners Manual

Controls
99
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
1 Navigation instructions
2 Display
> Cruise control
> Active cruise control
3 Speed
Selecting displays
iDrive, for explanation of principle, refer to
page 16.
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Display settings" and press the
controller.
5. Change to upper field if necessary. Turn the
controller until "Head-Up Display" is
selected and press the controller.
6. Change into the second field from the top.
Turn the controller until "Head-Up Display"
is selected and press the controller.
7. Select desired information of Head-Up Dis-
play.
8. Press the controller.
The information is shown on the Head-
Up Display.
The settings are stored for the remote key cur-
rently in use.
Setting brightness
The brightness of the display is automatically
adapted to the ambient lighting conditions.
However, you can change the base setting.
With the low beams switched on, the brightness
can also be adjusted with the knurled wheel of
the instrument lighting.
iDrive, for explanation of principle, refer to
page 16.
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Display settings" and press the
controller.
5. Change to upper field if necessary. Turn the
controller until "Head-Up Display" is
selected and press the controller.
6. Change into the second field from the top.
Turn the controller until "Brightness" is
selected and press the controller.
7. Turn the controller until the desired setting
is selected.
The setting is stored for the remote control cur-
rently in use.
Online Edition for Part no. 01 41 0 012 832 - © 08/06 BMW AGOnline Edition for Part no. 01 41 0 012 832 - © 08/06 BMW AG