Contents Owner's Manual for Vehicle A-Z The Ultimate Driving Machine THE BMW 3 SERIES SEDAN. OWNER'S MANUAL. Online Edition for Part no.
Series Owner's Manual for Vehicle Thank you for choosing a BMW. The more familiar you are with your vehicle, the better control you will have on the road. We therefore strongly suggest: Read this Owner's Manual before starting off in your new BMW. Also use the Integrated Owner's Manual in your vehicle. It con‐ tains important information on vehicle operation that will help you make full use of the technical features available in your BMW.
© 2013 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English X/13, 11 13 490 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no.
Addendum ADDENDUM TO BMW 3 SERIES SEDAN OWNER’S MANUAL 1402926810 We wanted to provide you with some updates and clarifications with respect to the printed BMW Owner’s Manual. These updates and clarifications will supersede the materials contained in that document. 1. 2.
Addendum text beginning, “Have the work performed only by your service center . . .” should be disregarded and the following text should be read in lieu thereof: “BMW recommends having this work performed by a service center as it is important that this safety feature functions properly.” 7. 8. 9. At page 90, under the heading: “Special windshield,” the paragraph beginning, “Therefore have the special windshield . . .
Addendum Information about recommended snow chains is available from a service center. 12. At page 199, under the heading “Hood,” the sentence beginning, “If you are unfamiliar” should be disregarded. 13. At page 202, under the heading: “Approved oil types,” the references to “Approved” should be read as “Suitable.” Immediately preceding the “Gasoline engine” chart, the following sentence should be inserted: “Add engine oils that meet the following oil rating standards: . . .” 14.
Addendum thereof the following text should be read: Use of recommended vehicle batteries The manufacturer of your vehicle recommends that you use vehicle batteries that it has tested and recommends for use in your vehicle; otherwise the vehicle could be damaged and systems or functions may not be fully available.
Contents The fastest way to find information on a partic‐ ular topic or item is by using the index, refer to page 234.
Notes Notes Using this Owner's Manual ›...‹ Verbal instructions to use with the voice ac‐ tivation system. Orientation ››...‹‹ Identifies the answers generated by the voice activation system. The fastest way to find information on a partic‐ ular topic is by using the index. An initial overview of the vehicle is provided in the first chapter.
Notes dards. In rare cases, therefore, the features de‐ scribed in this Owner's Manual may differ from those in your vehicle. Updates made after the editorial deadline Any updates made after the editorial deadline for the Owner's Manuals are located in the ap‐ pendix of the printed quick reference for the vehicle. For your own safety Warranty Your vehicle is technically configured for the operating conditions and registration require‐ ments applying in the country of first delivery homologation.
Notes chemicals known to the State of California to cause cancer and birth defects or other repro‐ ductive harm. Battery posts, terminals and re‐ lated accessories contain lead and lead com‐ pounds. Wash your hands after handling. Used engine oil contains chemicals that have caused cancer in laboratory animals. Always protect your skin by washing thoroughly with soap and water. Service and warranty We recommend that you read this publication thoroughly.
Notes cluding the manufacturer, using special diag‐ nostic tools. You can obtain further information there if it is needed. After a fault is corrected, the information in the fault memory is deleted or overwritten on a continuous basis. When the vehicle is in use, situations are con‐ ceivable in which it might be possible to asso‐ ciate this technical data with individuals if it is combined with other information, e.g.
Notes For Canadian customers Canadian customers who wish to report a safety-related defect to Transport Canada, De‐ fect Investigations and Recalls, may telephone the toll-free hotline 1-800-333-0510. You can also obtain other information about motor vehi‐ cle safety from http://www.tc.gc.ca/roadsafety. 10 Online Edition for Part no.
Notes Online Edition for Part no.
Online Edition for Part no.
At a glance These overviews of buttons, switches and displays are intended to familiarize you with your vehicle. You will also become quickly acquainted with the available control concepts and options. Online Edition for Part no.
At a glance Cockpit Cockpit Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Cockpit Front fog lamps 94 Reduce distance 124 Parking lamps 91 Increase distance 124 Low beams 91 Cruise control rocker switch 129, 123 9 Automatic headlamp con‐ trol 92 Instrument cluster 75 10 Steering wheel buttons, right Entertainment source Daytime running lights 92 Adaptive Light Control 92 Volume High-beam Assistant 93 Instrument lighting 94 7 Voice activation 26 Steering column stalk, left Telephone, see user's manual for Navigation, Entertainment and Communication Turn signal 68 H
At a glance Cockpit All around the center console 1 Headliner 17 9 2 Control Display 18 10 3 Ventilation 149 4 Parking brake 67 PDC Park Distance Control 130 Rearview camera 133 Hazard warning system 217 Parking assistant 138 Surround View 132 Central locking system 37 5 Glove compartment 159 6 Radio/CD/Multimedia, see user's manual for Navigation, Entertainment and Commu‐ nication 7 Climate control 144 8 Controller with buttons 18 16 11 Driving Dynamics Control 118 DSC Dynamic Sta
Cockpit At a glance All around the headliner 1 Intelligent Emergency Re‐ quest 217 4 Reading lamps 94 2 Glass sunroof, powered 47 5 Interior lamps 94 3 Indicator lamp, front passenger airbag 98 Online Edition for Part no.
At a glance iDrive iDrive Vehicle equipment Control Display All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Hints ▷ To clean the Control Display, follow the care instructions.
iDrive 1. Turn. At a glance Press the but‐ ton Function TEL Opens the Telephone menu. BACK Displays the previous panel. OPTION Opens the Options menu. Controller without navigation system The buttons can be used to open the menus directly. The controller can be used to select menu items and create the settings. 2. Press. 1. Turn. 3. Move in four directions. 2. Press. Buttons on controller Press the but‐ ton Function MENU Open the main menu. RADIO Opens the Radio menu.
At a glance iDrive Buttons on controller Selecting menu items Highlighted menu items can be selected. Press the but‐ Function ton MENU Open the main menu. Audio Open audio menu last lis‐ tened to, switch between au‐ dio menus. TEL Opens the Telephone menu. BACK Open previous panel. OPTION Opens the Options menu. 1. Turn the controller until the desired menu item is highlighted. 2. Press the controller.
iDrive White arrows pointing to the left or right indi‐ cate that additional panels can be opened. At a glance 2. Turn the controller until the desired setting is displayed. View of an opened menu When a menu is opened, it generally opens with the panel that was last selected in that menu. To display the first panel of a menu: ▷ Move the controller to the left repeatedly until the first panel is displayed. ▷ Press the menu button on the controller twice. Opening the Options menu Press the button.
At a glance iDrive ▷ For the input of upper/lower case letters and numbers, it may be necessary to switch via the controller to the correspond‐ ing Input mode, refer to page 25, e.g. when the spelling of upper and lower case letters is identical. Changing settings Settings on the control display, such as the volume, can be made via the touchpad. To do this slide to the left or right accordingly. ▷ Enter characters as they are displayed on the Control Display.
iDrive 5. Turn the controller until "Time:" is high‐ lighted, and then press the controller. At a glance Telephone symbols Symbol Meaning Incoming or outgoing call. Missed call. Wireless network reception strength. Symbol flashes: network search. Wireless network is not available. 6. Turn the controller to set the hours and press the controller. Bluetooth is switched on. Roaming is active. 7. Turn the controller to set the minutes and press the controller. Text message was received.
At a glance iDrive Split screen tions, phone numbers and entry points into the menu. General information The settings are stored for the remote control currently in use. Additional information can be displayed on the right side of the split screen, e.g., information from the onboard computer. In the divided screen view, the so-called split screen, this information remains visible even when you change to another menu. Switching the split screen on and off 1. Press the button. 2.
iDrive Deleting the button assignments 1. Press buttons 1 and 8 simultaneously for approx. five seconds. At a glance The entries are continuously compared to the data stored in the vehicle. 2. "OK" ▷ Only those letters are offered during the entry for which data is available. Entering letters and numbers ▷ Destination search: town/city names can be entered using the spelling of language available on the Control Display. General information 1. Turn the controller: select letters or num‐ bers. 2.
At a glance Voice activation system Voice activation system Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Using voice activation Activating the voice activation system 1.
Voice activation system Executing functions using short commands Functions on the main menu can be performed directly by means of short commands, nearly irrespective of which menu item is currently selected, e.g., ›Vehicle status‹. List of short commands of the voice activation system, see Navigation, Entertainment, Com‐ munication Owner's Manual.
At a glance Voice activation system Hints on Emergency Requests Do not use the voice activation system to ini‐ tiate an Emergency Request. In stressful situa‐ tions, the voice and vocal pitch can change. This can unnecessarily delay the establish‐ ment of a telephone connection. Instead, use the SOS button, refer to page 217, in the vicinity of the interior mirror. Environmental conditions ▷ Say the commands, numbers, and letters smoothly and with normal volume, empha‐ sis, and speed.
Integrated Owner's Manual in the vehicle At a glance Integrated Owner's Manual in the vehicle Vehicle equipment Select components All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. 1.
At a glance Integrated Owner's Manual in the vehicle Context help - Owner's Manual to the temporarily selected function The relevant information can be opened di‐ rectly. Programmable memory buttons General information Opening via the iDrive The Owner's Manual can be stored on the pro‐ grammable memory buttons and called up di‐ rectly. To move directly from the application on the Control Display to the options menu: Storing 1. "Owner's Manual" Select via the iDrive. 1.
Integrated Owner's Manual in the vehicle Online Edition for Part no.
Online Edition for Part no.
Controls This chapter is intended to provide you with information that will give you complete control of your vehicle. All features and accessories that are useful for driving and your safety, comfort and convenience are described here. Online Edition for Part no.
Controls Opening and closing Opening and closing Vehicle equipment Integrated key All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Opening and closing Take the used battery to a recycling center or to your service center. New remote controls New remote controls are available from the service center. Loss of the remote controls Lost remote controls can be blocked by your service center. Controls Start/Stop button within 10 seconds while pressing the brake.
Controls Opening and closing Profile management Exporting profiles Opening the profiles Most settings of the active profile and the saved contacts can be exported. A different profile can be called up than the one associated with the remote control cur‐ rently in use. This can be helpful for securing and retrieving personal settings, before delivering the vehicle to a workshop for example. 1. "Settings" 1. "Settings" 2. "Profiles" 2. "Profiles" 3. Select a profile. 3.
Opening and closing Controls ▷ CD/Multimedia: audio source listened to last. The system simultaneously engages and re‐ leases the locks on the following: ▷ Unlocking/locking of the vehicle: settings. ▷ Doors. ▷ Driving Dynamics Control: sport program ▷ Trunk lid. ▷ Driver's seat position: automatically re‐ trieved after unlocking. ▷ Fuel filler flap. Operating from the outside ▷ Programmable memory buttons: assign‐ ment. ▷ Via the remote control.
Controls Opening and closing Opening and closing: from the outside Using the remote control General information Take the remote control with you People or animals left unattended in a parked vehicle can lock the doors from the in‐ side. Always take the remote control with you when leaving the vehicle so that the vehicle can then be opened from the outside.◀ Switching on interior lamps and courtesy lamps Press the button on the remote control with the vehicle locked.
Opening and closing Malfunction Controls Using the door lock If the vehicle can no longer be locked or un‐ locked with the remote control, the battery may be discharged or there may be interfer‐ ence from external sources such as mobile phones, metal objects, overhead power lines, transmission towers, etc. General information If this occurs, lock or unlock the driver's door at the door lock using the integrated key.
Controls Opening and closing The fuel filler flap can only be locked using the remote control. Trunk lid Opening Manual operation If an electrical malfunction occurs, lock or un‐ lock the vehicle using the integrated key via the door lock on the driver's door. During opening, the trunk lid pivots back and up. Ensure that adequate clearance is available before opening. Opening from the outside Opening and closing: from the inside Locking and unlocking ▷ Press the button on the trunk lid.
Opening and closing Keep the closing path clear Make sure that the closing path of the trunk lid is clear; otherwise, injuries may re‐ sult.◀ Do not place the remote control in the cargo area Controls Comfort Access The concept The vehicle can be accessed without activat‐ ing the remote control. All you need to do is to have the remote con‐ trol with you, e.g., in your jacket pocket.
Controls Opening and closing Unlocking Monitor the closing process Monitor the closing process to ensure that no one becomes trapped.◀ Unlocking the trunk lid separately Press the button on the exterior of the trunk lid. This corresponds to pressing the ton on the remote control. Grasp the door handle on the driver's or front passenger door completely, arrow 1. This corresponds to pressing the on the remote control.
Opening and closing leg must pass through the ranges of both sensors. Controls Adjusting Unlocking The setting is stored for the remote control currently in use. 1. "Settings" 2. "Doors/key" 3. Select symbol or "Unlock button:" 4. Select the desired function: ▷ "Driver's door only" Opening The trunk lid opens, regardless of whether it was previously locked or unlocked. During opening, the trunk lid pivots back and up. Ensure that adequate clearance is available before opening.
Controls Opening and closing The vehicle locks automatically after a short period of time if a door is not opened. ▷ "Lock after start driving" The vehicle locks automatically after you drive away. The alarm system briefly indicates tampering: ▷ By sounding an acoustic alarm. ▷ By switching on the hazard warning sys‐ tem. ▷ By flashing the daytime running lights.
Opening and closing Press the button on the remote con‐ trol for at least 3 seconds. To switch off the alarm: press any button. Switching off the alarm To terminate the alarm: ▷ Unlock the vehicle using the remote con‐ trol. Controls Tilt alarm sensor The tilt of the vehicle is monitored. The alarm system responds in situations such as attempts to steal a wheel or when the car is towed. Interior motion sensor The windows and glass sunroof must be closed for the system to function properly.
Controls Opening and closing The window reopens slightly. Danger of pinching even with pinch pro‐ tection Even with the pinch protection system, check that the window's closing path is clear; other‐ wise, the closing action may not stop in certain situations, e.g., if thin objects are present.◀ No window accessories Opening ▷ Press the switch to the resistance point. The window opens while the switch is held. ▷ Press the switch beyond the resist‐ ance point. The window opens automatically.
Opening and closing The LED lights up if the safety function is switched on. Safety switch for rear operation Press the safety switch when transport‐ ing children in the rear; otherwise, injury may result if the windows are closed without super‐ vision.
Controls Opening and closing The glass sunroof and sliding visor open automatically. Pressing the switch again stops the opening motion. Analogously, the glass sunroof is closed by sliding the switch forward. The sliding visor remains open and can be closed by hand. Pinch protection is limited and the roof re‐ opens slightly if the closing force exceeds a certain value. 2. Press the switch forward again beyond the resistance point and hold until the roof closes without pinch protection.
Adjusting Controls Adjusting Vehicle equipment Manually adjustable seats All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Controls Adjusting Height Electrically adjustable seats At a glance Pull the lever and apply your weight to the seat or lift it off, as necessary. Backrest tilt 1 Seat and mirror memory 2 Backrest width 3 Lumbar support 4 Backrest tilt 5 Forward/backward, height, seat tilt Note Pull the lever and apply your weight to the backrest or lift it off, as necessary. Seat tilt The seat setting for the driver's seat is stored for the remote control currently in use.
Adjusting Controls 2. Height. Thigh support 3. Seat tilt. Pull the lever at the front of the seat and adjust the thigh support. Lumbar support The curvature of the seat backrest can be ad‐ justed in such a way that it supports the lumbar region of the spine. The lower back and the spine are supported for upright posture. ▷ Press the front/rear section of the switch. 4. Backrest tilt. The curvature is increased/ decreased. ▷ Press the upper/lower sec‐ tion of the switch.
Controls Adjusting Front seat heating If the drive is continued within approx. 15 mi‐ nutes, the seat heating is activated automati‐ cally with the temperature selected last. When ECO PRO, refer to page 173, is acti‐ vated, the heater output is reduced. Switching off Press the button longer. The LEDs go out. Switching on Press the button once for each tem‐ perature level. The maximum temperature is reached when three LEDs are lit. If the drive is continued within approx.
Adjusting One person per safety belt Never allow more than one person to wear a single safety belt. Never allow infants or small children to ride on a passenger's lap.◀ Putting on the belt Lay the belt, without twisting, snugly across the lap and shoulders, as close to the body as possible. Make sure that the belt lies low around the hips in the lap area and does not press on the abdomen. Otherwise, the belt can slip over the hips in the lap area in a frontal impact and injure the abdomen.
Controls Adjusting Adjusting the height 1. Pull the head restraint upward as far as possible. ▷ To raise: pull. ▷ To lower: press the button, arrow 1, and push the head restraint down. Tilt Three different tilt positions are available. 2. Press the button, arrow 1, and pull the head restraint out completely. Before transporting passengers Reinstall the head restraint before trans‐ porting anyone in the seat; otherwise, the pro‐ tective function of the head restraint is unavail‐ able.
Adjusting Controls Adjusting the height 1. Pull the head restraint upward as far as possible. ▷ To raise: pull. ▷ To lower: press the button, arrow 1, and push the head restraint down. The center head restraint cannot be adjusted in elevation. Folding down head restraints 2. Press the button, arrow 1, and pull the head restraint out completely.
Controls Adjusting General information 2. Press and hold the desired button 1 or 2 until the adjustment procedure is com‐ pleted. Calling up of a seat position deactivated After a brief period, the calling up of stored seat positions is deactivated to save battery power. To reactivate calling up of a seat position: Two different driver's seat and exterior mirror positions can be stored and retrieved for each remote control. Settings for the backrest width and lumbar support are not stored in memory.
Adjusting Depending on how the vehicle is equipped, the mirror setting is stored for the remote control in use. When the vehicle is unlocked via the re‐ mote control, the position is automatically re‐ trieved if the setting for this function is active. Fold in and out Selecting a mirror ▷ In car washes. Controls Press the button. Possible up to approx. 15 mph/20 km/h. For example, this is advantageous To change over to the other mirror: ▷ In narrow streets. Slide the mirror changeover switch.
Controls Adjusting Interior rearview mirror, manually dimmable Steering wheel General information Turn knob Do not adjust while driving Do not adjust the steering wheel while driving; otherwise, an unexpected movement could result in an accident.◀ Adjusting Turn the knob to reduce the blinding effect by the interior mirror. Interior rearview mirror, automatic dimming feature 1. Fold the lever down. The concept 2.
Transporting children safely Controls Transporting children safely Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Controls Transporting children safely On the front passenger seat Child seat security Deactivating airbags After installing a child restraint fixing system in the front passenger seat, make sure that the front, knee and side airbags on the front pas‐ senger side are deactivated. Deactivate the front passenger airbags auto‐ matically, refer to page 98.
Transporting children safely Mounts for the lower LATCH anchors The lower anchors may be used to attach the CRS to the vehicle seat up to a combined child and CRS weight of 65 lb/30 kg when the child is restrained by the internal harnesses.
Controls Transporting children safely Note 5. Tighten the retaining strap by pulling it down. Mounting eyes Only use the mounting eyes for the up‐ per retaining strap to secure child restraint fix‐ ing systems; otherwise, the mounting eyes could be damaged.◀ Retaining strap guide Retaining strap 6. Lower and lock head restraints as needed.
Driving Controls Driving Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Start/Stop button The concept Pressing the Start/Stop button switches the ignition on or off and starts the engine.
Controls Driving When the ignition is switched off, by opening or closing the driver's door or unbuckling the driver's seat belt, the radio ready state remains active. Radio ready state Activate radio ready state: ▷ When the engine is running: press the Start/Stop button. Some electronic systems/power consumers remain ready for operation. The radio ready state switches off automati‐ cally: ▷ After approx. 8 minutes. ▷ When the vehicle is locked using the cen‐ tral locking system.
Driving Engine stop Controls Automatic Engine Start/Stop Function Hints Take the remote control with you Take the remote control with you when leaving the vehicle so that children, for exam‐ ple, cannot start the engine.◀ Set the parking brake and further secure the vehicle as required The concept The Auto Start/Stop function helps save fuel. The system switches off the engine during a stop, e.g., in traffic congestion or at traffic lights. The ignition remains switched on.
Controls Driving Displays in the instrument cluster The READY display in the tach‐ ometer signals that the Auto Start/Stop function is ready to start the engine automatically. The display indicates that the conditions for an automatic en‐ gine stop have not been satis‐ fied. ▷ Automatic transmission: By releasing the brake pedal. After the engine starts, accelerate as usual.
Driving Activating/deactivating the system manually Using the button Controls Malfunction The Auto Start/Stop function no longer switches of the engine automatically. A Check Control message is displayed. It is possible to continue driving. Have the system checked. Parking brake Applying The lever automatically engages after being pulled up. The indicator lamp lights up red. The parking brake is set. Press the button.
Controls Driving periodically while coasting, if traffic conditions permit. The brake lamps will not light up if the parking brake is engaged. Turn signal, high beams, headlamp flasher Signaling briefly Press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.
Driving Switching on Controls Intermittent operation or rain sensor The concept Without the rain sensor, the frequency of the wiper operation is preset. The rain sensor automatically controls the time between wipes depending on the intensity of the rainfall. The sensor is located on the wind‐ shield, directly behind the interior rearview mir‐ ror. Press the wiper levers up. The lever automatically returns to its initial po‐ sition when released.
Controls Driving Setting the frequency or sensitivity of the rain sensor Fold-out position of the wipers Required when changing the wiper blades or under frosty conditions, for example. 1. Switch the ignition on and off again. 2. Under frosty conditions, ensure that the wiper blades are not frozen onto the wind‐ shield. 3. Press the wiper lever up beyond the point of resistance and hold it for approx. 3 sec‐ onds, until the wiper remains in a nearly vertical position. Turn the thumbwheel.
Driving tainer. Use BMW’s Windshield Washer Con‐ centrate or the equivalent.◀ Controls Manual transmission Shifting Washer fluid reservoir Adding washer fluid Only add washer fluid when the engine is cool, and then close the cover completely to avoid contact between the washer fluid and hot engine parts. Otherwise, there is the danger of fire and a risk to personal safety if the fluid is spilled.
Controls Driving off, refer to page 63, and when position R or D is engaged. Engaging D, R and N ▷ With the ignition is off, if position N is en‐ gaged. ▷ If the safety belt is unbuckled, the driver's door is opened, and the brake pedal is not pressed while the vehicle is stationary and transmission position R or D is engaged. Before exiting the vehicle, make sure that posi‐ tion P of the automatic transmission is en‐ gaged. Otherwise, the vehicle may begin to roll.
Driving Sport program and manual mode Activating the sport program Controls Sport automatic transmission: prevent automatic upshifting in M/S manual mode For vehicles with Sport automatic transmis‐ sions, automatic shift operations are not per‐ formed, at maximum engine speed for exam‐ ple, if one of the following conditions is met: ▷ DSC deactivated. ▷ TRACTION activated. ▷ SPORT+ activated. In addition, the kickdown is deactivated. Push the selector lever to the left out of trans‐ mission position D.
Controls Driving Gears will only be shifted at appropriate engine and road speeds, e.g., downshifting is not pos‐ sible if the engine speed is too high. TRACTION is displayed in the instrument cluster and the indicator lamp for DSC OFF lights up. The selected gear is briefly displayed in the in‐ strument cluster, followed by the current gear. 2. Engaging the transmission position S Displays in the instrument cluster 4.
Displays Controls Displays Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Controls Displays Overview, instrument cluster with enhanced features 1 Fuel gauge 80 5 Engine oil temperature 80 2 Speedometer 6 Current fuel consumption 82 3 Indicator/warning lamps 78 7 Electronic displays 77 4 Tachometer 80 8 Display/reset miles 81 76 Online Edition for Part no.
Displays Controls Electronic displays Overview, instrument cluster 1 Messages, e.g. Check Control 78 Miles/trip miles 81 Time 81 Computer 86 Date 81 2 External temperature 81 Selection lists 85 Transmission display 74 Gear shift indicator 83 3 Status, Driving Dynamics Control 118 Service requirements 82 Online Edition for Part no.
Controls Displays Overview, instrument cluster with enhanced features 1 Time 81 Navigation display, see user's manual for Navigation, Entertainment and Communi‐ cation. External temperature 81 Date 81 Selection list, e.g., radio 85 2 Energy recovery 82 Transmission display 74 Speed limit detection 83 Current fuel consumption 82 Computer 86 ECO PRO 173 Miles/trip miles 81 3 Messages, e.g.
Displays Overview: indicator/warning lamps Symbol Function or system Controls Symbol Function or system Safety belts. Turn signal. Airbag system. Front fog lamps. Steering system. High beams. Engine functions. High-beam Assistant. Parking brake. Parking lamps, headlamp control. Brake system. In Canadian models Active Cruise Control. Vehicle detection, Active Cruise Control: collision warning. Parking brake. Brake system. ABS Antilock Brake System. Pedestrian warning.
Controls Displays Symbols 3. Depending on the Check Control message, the following functions can be selected. 4. Select the text message. ▷ Messages after trip completion "Owner's Manual" Display additional information about the Check Control message in the Integrated Owner's Manual. ▷ Special messages that are displayed during driving are displayed again after the ignition is switched off. "Service request" Contact your service center.
Displays Coolant temperature Controls Time If the coolant along with the engine becomes too hot, a Check Control message is displayed. The time is displayed at the bot‐ tom of the instrument cluster. Check the coolant level, refer to page 203. Setting the time and time for‐ mat, refer to page 88. Odometer and trip odometer ▷ Odometer, arrow 1. Date The date is displayed in the computer. ▷ Trip odometer, arrow 2. Setting the date and date for‐ mat, refer to page 88.
Controls Displays Current fuel consumption Instrument cluster Displays the current fuel con‐ sumption. You can check whether you are currently driv‐ ing in an efficient and environ‐ mentally-friendly manner. Instrument cluster with enhanced features Displays the current fuel con‐ sumption. You can check whether you are currently driv‐ ing in an efficient and environ‐ mentally-friendly manner. Displaying the current fuel consumption 1. "Settings" 2. "Info display" 3.
Displays Ensure that the vehicle date and time are set correctly. Manual transmission: displays Symbol 1. "Vehicle Info" Description Fuel efficient gear is engaged. 2. "Vehicle status" 3. Controls "Service required" 4. "§ Vehicle inspection" Shift up to fuel efficient gear. 5. "Date:" 6. Adjust the settings. Shift down to fuel efficient gear. 7. Confirm. The entered date is stored. Shift into neutral.
Controls Displays the navigation system and also displays speed limits present on routes without signs. No Passing Information No Passing Information in the instrument clus‐ ter displays the beginnings and ends of no passing zones detected by the camera. The system accounts for only the beginnings and ends of No Passing zones marked by signs. No display is shown: ▷ In countries where No Passing zones are primarily identified with road markings. ▷ On routes without signage.
Displays ▷ When signs are concealed by objects. Display ▷ When driving very close to the vehicle in front of you. Instrument cluster Controls ▷ When driving toward bright lights. ▷ When the windshield behind the interior rearview mirror is fogged over, dirty or cov‐ ered by a sticker, etc. ▷ In the event of incorrect detection by the camera. ▷ If the speed limits stored in the navigation system are incorrect. ▷ In areas not covered by the navigation sys‐ tem.
Controls Displays Computer ▷ Arrow view of navigation system. Indication in the info display The information from the on‐ board computer is shown in the info display in the instrument cluster. When destination guidance is activated in the navigation system. When the arrow view in the Head-up Dis‐ play is inactive. ▷ ECO PRO bonus range.
Displays Controls Distance to destination Setting your current speed as the limit The distance remaining to the destination is displayed if a destination is entered in the navi‐ gation system before the trip is started. 1. "Settings" The distance to the destination is adopted au‐ tomatically. Time of arrival The estimated time of arrival is displayed if a destination is en‐ tered in the navigation system before the trip is started. The time must be correctly set. Speed limit detection 2. "Speed" 3.
Controls Displays Displaying sport displays in the Control Display Date 1. "Vehicle Info" Setting the date 2. "Sport displays" 1. "Settings" 2. "Time/Date" Settings on the Control Display 3. "Date:" 4. Turn the controller until the desired day is displayed. 5. Press the controller. Time Setting the time zone 6. Make the necessary settings for the month and year. 1. "Settings" The date is stored. 2. "Time/Date" Setting the date format 3. "Time zone" 4. Select the desired time zone.
Displays Units of measure Head-up Display Setting the units of measure The concept Controls To set the units for fuel consumption, route/ distance and temperature: 1. "Settings" 2. "Language/Units" 3. Select the desired menu item. 4. Select the desired unit. The setting is stored for the remote control currently in use. Brightness This system projects important information into the driver's field of vision, e.g., the speed.
Controls Displays ▷ Speed limit detection. Setting the rotation ▷ Cruise control. 1. "Settings" ▷ Pedestrian warning. 2. "Head-Up Display" ▷ Selection list from the instrument cluster. 3. "Rotation" Some of this information is only displayed briefly as needed. 4. Turn the controller. Selecting displays in the Head-up Display The setting is stored for the remote control currently in use. Special windshield 1. "Settings" The windshield is part of the system. 2. "Head-Up Display" 3.
Lamps Controls Lamps Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Controls Lamps Roadside parking lamps 3. "Pathway lighting:" 4. Set the duration. The setting is stored for the remote control currently in use. Automatic headlamp control : the low beams are Switch position switched on and off automatically, e.g., in tun‐ nels, in twilight or if there is precipitation. The indicator lamp in the instrument cluster lights up. The vehicle can be illuminated on one side. A blue sky with the sun low on the horizon can cause the lights to be switched on.
Lamps To avoid blinding oncoming traffic, the Adap‐ tive Light Control does not swivel to the driv‐ er's side when the vehicle is at a standstill. When driving in reverse, only the cornering lamp is active. Malfunction A Check Control message is displayed. Adaptive light control is malfunctioning or has failed. Have the system checked as soon as possible.
Controls Lamps The system is not fully functional in situations such as the following, and driver intervention may be necessary: ▷ In very unfavorable weather conditions, such as fog or heavy precipitation. ▷ In detecting poorly-lit road users, such as pedestrians, cyclists, horseback riders and wagons; when driving close to train or ship traffic; and at animal crossings.
Lamps Controls To switch off permanently: press the button for approx. 3 seconds. Switch back on: press button. Reading lamps Press the button. Reading lamps are located at the front and rear next to the interior lamps. When the interior lamps are switched off per‐ manently, the reading lamps cannot be switched on. Ambient light Depending on the equipment, the lighting can be adjusted in the interior for some lights. Selecting color scheme 1. "Settings" 2. "Lighting" 3. "Ambient:" 4.
Controls Safety Safety Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Safety Protective action Airbags are not triggered in every impact situa‐ tion, e.g., in less severe accidents or rear-end collisions. Information on how to ensure the optimal protective effect of the airbags ▷ Keep at a distance from the airbags. Controls ▷ Never modify either the individual compo‐ nents or the wiring in the airbag system. This also applies to steering wheel covers, the dashboard, the seats, the roof pillars and the sides of the headliner.
Controls Safety When there is a malfunction, have the airbag system checked immediately When there is a malfunction, have the airbag system checked immediately; otherwise, there is a risk that the system does not function as expected in the event of an accident despite corresponding severity of the accident.◀ Automatic deactivation of the front passenger airbags The system determines whether the front pas‐ senger seat is occupied by measuring the re‐ sistance of the human body.
Safety Detected child seats The system generally detects children seated in a child seat, especially in the child seats that were required by NHTSA when the vehicle was manufactured. After installing a child seat, make sure that the indicator lamp for the front passenger airbags lights up. This indicates that the child seat has been detected and the front passenger airbags are not activated.
Controls Safety All wheels green System is active and will issue a warning rela‐ tive to the tire inflation pressures stored during the last reset. One wheel is yellow A flat tire or major drop in inflation pressure in the indicated tire. All wheels are yellow A flat tire or major drop in inflation pressure in several tires. Wheels, gray The system cannot detect a flat tire. Reasons for this may be: ▷ The system is being reset. ▷ Malfunction.
Safety If an identification is not possible, please contact the service center. 2. Rectify the flat tire. Use of tire sealant, e.g., the Mobility Sys‐ tem, may damage the TPM wheel elec‐ tronics. In this case, have the electronics checked at the next opportunity and have them replaced if necessary. Run-flat tires Maximum speed You can continue driving with a damaged tire at speeds up to 50 mph/80 km/h. Continued driving with a flat tire If continuing to drive with a damaged tire: 1.
Controls Safety Malfunction The yellow warning lamp flashes and then lights up continuously. A Check Control message is displayed. No flat tire or loss of tire pressure can be detected. Display in the following situations: ▷ A wheel without TPM electronics is fitted: have the service center check it if neces‐ sary. ▷ Malfunction: have the system checked by your service center. ▷ TPM was unable to complete the reset. Reset the system again.
Safety sured. Initialize the system after each correc‐ tion of the tire inflation pressure and after every tire or wheel change. Status display The current status of the Flat Tire Monitor can be displayed on the Control Display, e.g., whether or not the FTM is active. 1. "Vehicle Info" 2. "Vehicle status" 3. "Flat Tire Monitor (FTM)" Controls 2. Check whether the vehicle is fitted with regular tires or run-flat tires.
Controls Safety If an identification is not possible, please contact the service center. 2. Rectify the flat tire. Run-flat tires Maximum speed You can continue driving with a damaged tire at speeds up to 50 mph/80 km/h. Continued driving with a flat tire If continuing to drive with a damaged tire: 1. Avoid sudden braking and steering maneu‐ vers. 2. Do not exceed a speed of 50 mph/80 km/h. 3. Check the air pressure in all four tires at the next opportunity.
Safety Controls At a glance Collision warning Button in the vehicle Depending on how the equipment is equipped, the collision warning system consists of one of the two systems: ▷ Collision warning with City Braking func‐ tion, refer to page 105; ▷ Collision warning with braking function, re‐ fer to page 108 Intelligent Safety button Collision warning with City Braking function The concept Camera The system can help to prevent accidents.
Controls Safety Detection range Keep the windshield in the area behind the in‐ terior rear view mirror clean and clear. Switching on/off Switching on automatically The system is automatically active every time the engine is started using the Start/Stop but‐ ton. Vehicles are observed when they are traveling in the same direction of movement if they are located within the detection range of the sys‐ tem.
Safety Controls System limits Symbol Measure The vehicle lights up red: prewarn‐ ing. Increase braking and distance. The vehicle flashes red and an acoustic signal sounds: acute warn‐ ing. You are requested to intervene by braking or making an evasive ma‐ neuver. Braking intervention The warning prompts the driver himself to in‐ tervene. During a warning, the maximum brak‐ ing force is used. A prerequisite for the brake booster is a sufficiently fast and sufficiently strong actuation of the brake pedal.
Controls Safety Prewarning sensitivity At a glance Depending on the set prewarning time, this may result in increased false warnings. Button in the vehicle Collision warning with braking function The concept The system issues a warning if there is immi‐ nent danger of a collision and also includes a braking function. If the vehicle is equipped with Active Cruise Control with Stop & Go, the collision warning is controlled via the cruise control radar sensor in conjunction with a camera.
Safety Switch the system back on: press the button again. Setting the warning time The warning time can be set via iDrive. 1. "Settings" 2. "Frontal Coll. Warning" 3. Activate the desired warning time on the Control Display. The selected channel is stored for the remote control currently in use. Display Controls Adapting your speed and driving style The warning does not relieve the driver of the responsibility to adapt his or her driving speed and style to the traffic conditions.
Controls Safety System limits Prewarning sensitivity Be alert Due to system limitations, warnings may be not be issued at all, or may be issued late or improperly. Therefore, always be alert and ready to intervene; otherwise, there is the dan‐ ger of an accident occurring.◀ Depending on the set prewarning time, this may result in increased false warnings. Pedestrian warning with city braking function The concept Detection range The system's detection capabilities are limited.
Safety A collision is imminent if pedestrians are lo‐ cated within the central area. A warning is is‐ sued about pedestrians who are located within the extended area only if they are moving in the direction of the central area. At a glance Controls Switching off Press the button: the systems are switched off. The LED goes out. Press the button: the systems are switched off. The LED lights up.
Controls Safety The braking intervention can be interrupted by pressing on the accelerator pedal or by actively moving the steering wheel. Tow-starting and towing ▷ Up to 10 seconds after the start of the en‐ gine, via the Start/Stop knob. ▷ During calibration of the camera immedi‐ ately after vehicle shipment. When tow-starting and towing the vehi‐ cle, switch off the Intelligent Safety systems; otherwise, improper behavior of the braking function of individual systems could result in an accident.
Safety At a glance Controls ▷ Arrows: at least one lane marking was de‐ tected and warnings can be issued. Button in the vehicle Issued warning If you leave the lane and if a lane marking has been detected, the steering wheel begins vi‐ brating. If the turn signal is set before changing the lane, a warning is not issued. End of warning Lane departure warning The warning ends: ▷ Automatically after approx. 3 seconds. ▷ When returning to your own lane. Camera ▷ When braking hard.
Controls Safety Active Blind Spot Detection At a glance The concept Button in the vehicle Two radar sensors below the rear bumper monitor the area behind and next to the vehicle at speeds above approx. 30 mph/50 km/h. The system indicates whether there are vehi‐ cles in the blind spot, arrow 1, or approaching from behind on the adjacent lane, arrow 2. Active Blind Spot Detection Radar sensors The lamp in the exterior mirror housing lights up dimly.
Safety Display Controls ▷ NBG009014A. Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ▷ This device may not cause harmful inter‐ ference, and ▷ this device must accept any interference received, including interference that may cause undesired operation. Information stage The dimmed lamp in the mirror housing indi‐ cates when there are vehicles in the blind spot or approaching from behind.
Controls Driving stability control systems Driving stability control systems Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Driving stability control systems Indicator/warning lamps When DSC is deactivated, DSC OFF is dis‐ played in the instrument cluster. The indicator lamp lights up: DSC is deactivated. DTC Dynamic Traction Control The concept The DTC system is a version of the DSC in which forward momentum is optimized. The system ensures maximum forward mo‐ mentum on special road conditions, e.g., unp‐ lowed snowy roads, but driving stability is lim‐ ited. Controls Deactivating DTC Press the button again.
Controls Driving stability control systems COMFORT/ECO PRO Balanced control of the vehicle. ▷ When activating cruise control in TRAC‐ TION or DSC OFF mode. DSC OFF Variable sport steering The variable sport steering increases the steering angle of the front wheels at large steering wheel angles, e.g., in tight curves or when parking. Steering becomes more direct. It also varies the force required to turn the wheels in accordance with the vehicle speed. This results in a sporty steering response.
Driving stability control systems The program can be configured to individual specifications. The configuration is stored for the remote control currently in use. Activating SPORT Press button repeatedly until SPORT is displayed in the instrument cluster. Controls Comfort functions and the engine controller are adjusted. The program can be configured to individual specifications. Activating ECO PRO Press button repeatedly until ECO PRO is displayed in the instrument Configuring SPORT cluster.
Controls Driving stability control systems 2. "Driving mode" 3. "Driving mode info" Drive-off assistant This system supports driving away on gradi‐ ents. The parking brake is not required. 1. Hold the vehicle in place with the foot brake. 2. Release the foot brake and drive away without delay. After the foot brake is released, the vehicle is held in place for approx. 2 seconds. Depending on the vehicle load or when a trailer is being used, the vehicle may roll back slightly.
Driving comfort Controls Driving comfort Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Controls Driving comfort At a glance Buttons on the steering wheel Press the button Function System on/off, interrupt, refer to page 122 Maintaining/storing the speed, refer to page 123 A dirty or covered sensor may hinder the de‐ tection of vehicles. Resume speed, refer to page 124 ▷ If necessary, clean the radar sensor. Re‐ move layers of snow and ice carefully. Reduce distance, refer to page 124 ▷ Do not cover the view field of the radar sensor.
Driving comfort Controls The displays go out. The stored desired speed and distance are deleted. Interrupting When active, press the button. If interrupting the system while stationary, press on the brake pedal at the same time. The system is automatically interrupted in the following situations: ▷ When the brakes are applied. ▷ When transmission position D is disen‐ gaged. ▷ When DTC Dynamic Traction Control is activated or DSC is deactivated. ▷ When DSC is actively controlling stability.
Controls Driving comfort The selected distance, refer to page 125, is displayed in the instrument cluster. Calling up the desired speed and distance While driving Press the rocker switch up or down repeatedly until the desired speed is set. If active, the displayed speed is stored and the vehicle reaches the stored speed if the road is clear. ▷ Each time the rocker switch is pressed to the point of resistance, the desired speed increases or decreases by approx. 1 mph/1 km/h.
Driving comfort 2. Release the brake pedal. 3. Press on the accelerator briefly, or press the RES rocker switch when the vehicle ahead of you drives away. Displays in the instrument cluster Desired speed ▷ The marking lights up green: the system is active. ▷ The marking lights up or‐ ange: the system has been interrupted. ▷ The marking does not light up: the system is switched off. Brief status display Selected desired speed.
Controls Driving comfort The maximum speed that can be set depends on the vehicle. The system can also be activated when sta‐ tionary. Comply with the legal speed limit in every sit‐ uation when using the system. No warnings A warning may not be issued when ap‐ proaching a stationary or very slow-moving ob‐ stacle. You must react yourself; otherwise, there is the danger of an accident occurring.
Driving comfort Controls Unexpected lane change If a vehicle ahead of you unexpectedly moves into another lane from behind a stopped vehi‐ cle, you yourself must react, as the system does not react to stopped vehicles. When approaching a curve, the system may react briefly to the vehicles in the next lane due to the bend of the curve. Any deceleration of the vehicle by the system can be compensated for by briefly accelerating.
Controls Driving comfort Malfunction At a glance The system cannot be activated if the radar sensor is not aligned correctly. This may be caused by damage incurred during parking, for example. Buttons on the steering wheel Press the button Function A Check Control message is displayed if the system fails. System on/off, interrupt Store speed Cruise control Resume speed The concept Rocker switch: change, hold, store speed The system is functional at speeds beginning at approx. 20 mph/30 km/h.
Driving comfort ▷ The brakes are applied. ▷ The clutch pedal is depressed for a few seconds or released while a gear is not en‐ gaged. ▷ The gear engaged is too high for the cur‐ rent speed. Controls Adapting the desired speed Adapt the desired speed to the road con‐ ditions and be ready to brake at all times; oth‐ erwise, there is the danger of an accident oc‐ curring.◀ ▷ The transmission position D is disengaged. ▷ DTC Dynamic Traction Control is activated or DSC is deactivated.
Controls Driving comfort Displays in the instrument cluster ▷ By the front middle sensors and the two corner sensors at approx. 24 in/60 cm. Indicator lamp ▷ By the rear middle sensors at approx. 5 ft/1.50 m. Depending on how the vehicle is equip‐ ped, the indicator lamp in the instru‐ ment cluster indicates whether the sys‐ tem is switched on. To ensure full operability: ▷ Do not cover sensors, e.g., by stickers, bi‐ cycle racks and the like. ▷ Keep the sensors clean and free of ice.
Driving comfort At a glance Display Button in the vehicle Signal tones Controls When approaching an object, an intermittent tone is sounded that indicates the position of the object. For example, if an object is de‐ tected to the left rear of the vehicle, a signal tone sounds from the left rear speaker. The shorter the distance to the object be‐ comes, the shorter the intervals. PDC Park Distance Control If the distance to a detected object is less than approx.
Controls Driving comfort 2. Press the controller. The setting is stored for the remote control currently in use. ▷ When sensors are very dirty or covered in ice. ▷ When sensors are covered in snow. ▷ On rough road surfaces. System limits Limits of ultrasonic measurement The detection of objects can reach the physi‐ cal limits of ultrasonic measurement, e.g., in the following circumstances: ▷ For small children and animals. ▷ For persons with certain clothing, e.g. coats.
Driving comfort Rearview camera Controls Camera The concept The rearview camera provides assistance in parking and maneuvering backwards. The area behind the vehicle is shown on the Control Display. Hints Check the traffic situation as well Check the traffic situation around the ve‐ hicle with your own eyes. Otherwise, an acci‐ dent could result from road users or objects lo‐ cated outside the picture area of the backup camera.◀ The camera lens is located in the handle of the trunk lid.
Controls Driving comfort The rearview camera image is displayed. The setting is stored for the remote control cur‐ rently in use. Turning circle lines Display on the Control Display Functional requirement ▷ The rearview camera is switched on. ▷ The trunk lid is fully closed. Activating the assistance functions More than one assistance function can be ac‐ tive at the same time. ▷ Parking aid lines "Parking aid lines" Pathway and turning circle lines are dis‐ played.
Driving comfort Parking using pathway and turning circle lines 1. Position the vehicle so that the turning cir‐ cle lines lead to within the limits of the parking space. Controls System limits Detection of objects Very low obstacles as well as high, protruding objects such as ledges may not be detected by the system. Assistance functions also take into account data of the PDC. Follow instructions in the PDC chapter, refer to page 130.
Controls Driving comfort At a glance Switch the system back on if necessary. Display Button in the vehicle The traffic area to the left and right is displayed on the Control Display. Side View Guidelines at the bottom of the image show the position of the front of the vehicle. Cameras Brightness With the Side View switched on: 1. "Brightness" 2. Turn the controller until the desired setting is reached, and press the controller. Contrast Two cameras integrated in the bumpers cap‐ ture the image.
Driving comfort General information Controls Cameras The image is captured by two cameras integrated in the exterior mirrors and by the backup camera. The range is at least 7 ft/2 m to the side and rear. In this way, obstacles up to the height of the exterior mirrors are detected early. Notes Check the traffic situation as well Check the traffic situation around the ve‐ hicle with your own eyes.
Controls Driving comfort The backup camera image is displayed. The setting is stored for the remote control cur‐ rently in use. Display Visual warning The approach of the vehicle to an object can be shown on the Control Display. When the distance to an object is small, a red bar is shown in front of the vehicle, as it is in the PDC display.
Driving comfort Ultrasound sensors measure parking spaces on both sides of the vehicle. The parking assistant calculates the best pos‐ sible parking line and takes control of steering during the parking procedure. When parking, also take note of the visual and acoustic information and instructions issued by the PDC, the parking assistant and the rear‐ view camera and react accordingly. Controls Curbs The parking assistant may steer the vehi‐ cle over or onto curbs.
Controls Driving comfort Switching on with the reverse gear At a glance Shift into reverse. Button in the vehicle The current status of the parking space search is indicated on the Control Display. "Parking Assistant" Select the Activate: symbol in the Control Display. Switching off The system can be deactivated as follows: ▷ Press the button. ▷ Switch off the ignition.
Driving comfort Gray: parking space search. Blue: the system is activated. A suitable parking space was found. The parking procedure is active. Steering control has been seized. Status of the parking space search Controls road as on the Control Display. When the parking assistant is active, suitable parking spaces are highlighted. ▷ The parking procedure is ac‐ tive. Steering control has been seized.
Controls ▷ Driving comfort "Parking Assistant" Select the symbol on the Control Display. ▷ Press the button. ▷ On bumpy road surfaces such as gravel roads. ▷ On slippery ground. ▷ On steep uphill or downhill grades. Interrupting automatically The system is interrupted automatically in the following situations: ▷ If the driver grasps the steering wheel or if he takes over steering. ▷ If a gear is selected that does not match the instruction on the Control Display.
Driving comfort Controls The parking assistant failed. Have the system checked. Online Edition for Part no.
Controls Climate control Climate control Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Climate control Climate control functions in detail Manual air distribution Turn the wheel to select the de‐ sired program or the desired in‐ termediate setting. ▷ Windows. ▷ Upper body region. ▷ ▷ Windows, upper body region, and foot‐ well. Footwell. Defrosting windows and removing condensation Direct the air distribution toward windows, in‐ crease the air flow and temperature, and, if necessary, use the cooling function. Rear window defroster Press the button.
Controls Climate control ▷ LED off: outside air flows in continuously. Switching on ▷ LED on, recirculated-air mode: the supply of outside air into the vehicle is perma‐ nently blocked. Press any button except If the windows fog over, switch off recircu‐ lated-air mode and increase the air flow, if nec‐ essary. Continuous recirculated-air mode The recirculated-air mode should not be used for an extended period of time, as the air quality inside the vehicle deteriorates stead‐ ily.
Climate control Controls 5 Maximum cooling 11 Air flow, AUTO intensity 6 Temperature, right 12 Air distribution, left 7 Seat heating, right 52 13 Rear window defroster 8 Cooling function 9 Automatic recirculated-air control/recircu‐ lated-air mode 14 Interior temperature sensor — always keep clear 10 Air distribution, right 15 Defrosting windows and removing conden‐ sation Climate control functions in detail Intensity of the AUTO program Temperature With the AUTO program switched on, au
Controls Climate control Depending on the weather, the windshield may fog up briefly when the engine is started. ▷ Footwell. The cooling function is switched on automati‐ cally with the AUTO program. ▷ Windows, upper body region and footwell: driver's side only. When using the automatic climate control, condensation water, refer to page 168, devel‐ ops that exits underneath the vehicle. If the windows are fogged over, press the AUTO button to utilize the condensation sen‐ sor.
Climate control Switching the system on/off Controls Adjusting the ventilation ▷ Ventilation for cooling: Switching off Press the left button for the minimum speed. Adjust the vent to direct the air in your di‐ rection, such as if the vehicle interior is hot from the sun. ▷ Draft-free ventilation: Switching on Adjust the vent to let the air flow past you. Press any button except ▷ Rear window defroster. Ventilation in the rear ▷ Seat heating.
Controls Climate control Switching on/off directly 1. "Settings" 2. "Climate" 3. "Activate comf. ventilation" The symbol on the automatic climate con‐ trol flashes if the system is switched on. Preselecting the switch-on time 1. "Settings" 2. "Climate" 3. "Timer 1:" or "Timer 2:" 4. Set the desired time. Activating the switch-on time 1. "Settings" 2. "Climate" 3. "Activate timer 1" or "Activate timer 2" The symbol on the automatic climate con‐ trol lights up when the switch-on time is acti‐ vated.
Interior equipment Controls Interior equipment Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Universal garage door opener ally compatible with the universal garage door opener.
Controls Interior equipment rearview mirror. The required distance de‐ pends on the manual transmitter. and continuous illumination of the LED will re‐ peat for approximately 20 seconds. 4. Simultaneously press and hold the button of the desired function on the hand-held transmitter and the button to be program‐ med on the interior rearview mirror. The LED on the interior rearview mirror will be‐ gin flashing slowly.
Interior equipment indicates that the button on the interior rearview mirror has been programmed. The system can then be controlled by the button on the interior rearview mirror. Controls Digital compass At a glance If the LED does not flash faster after at least 60 seconds, change the distance and repeat the step. Several more attempts at different distances may be necessary. Wait at least 15 seconds between attempts.
Controls Interior equipment World map with magnetic zones Procedure Procedure 1. Press and hold the control button for ap‐ prox. 3 to 4 seconds. The number of the set compass zone appears in the mirror. 1. Make sure that there are no large metallic objects or overhead power lines near the vehicle and that there is sufficient room to drive around in a circle. 2.
Interior equipment Controls The setting is stored automatically after ap‐ proximately 10 seconds. Ashtray/cigarette lighter Ashtray Opening The lighter is located next to the ashtray. Push in the lighter. The lighter can be removed as soon as it pops back out. Raise cover. Connecting electrical devices Emptying Hints Take out the insert. Do not plug chargers into the socket Do not connect battery chargers to the factory-installed sockets in the vehicle as this may damage the battery.
Controls Interior equipment Front center console In the cargo area Raise the cap and remove the cover or ciga‐ rette lighter. The socket is located on the left side in the cargo area. In the front passenger footwell USB interface for data transfer The concept Connection for importing and exporting data on USB devices, e.g.: ▷ Personal Profile settings, refer to page 36. ▷ Music collection. The socket is located below the glove com‐ partment. Rear center console Remove the cover.
Interior equipment With Professional navigation system or TV: at a glance Controls Hints Danger of pinching Before folding down the rear seat back‐ rests, ensure that the area of movement of the backrests is clear. In particular, ensure that no one is located in or reaches into the area of movement of the rear seat backrests when the middle section is folded down. Otherwise, in‐ jury or damage may result.◀ Lock the rear seat backrests in position The USB interface is located in the center arm‐ rest.
Controls Interior equipment 4. Pull the corresponding lever in the cargo area to release the rear seat backrest. Folding down the middle section 1. Fold in the middle head restraint. 2. Reach into the recess and pull the middle section forward. 5. The unlocked rear seat backrest moves forward slightly. 6. Fold backrest forward. Closing 1. Return the rear seat backrest to the upright seating position and engage it.
Storage compartments Controls Storage compartments Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. ▷ Compartments in the doors, refer to page 160. ▷ Nets on the backrests of the front seats.
Controls Storage compartments Front storage compartment Locking The glove compartment can be locked with an integrated key to separately secure the trunk lid, refer to page 41, for example. This prevents access to the glove compart‐ ment and to the cargo area. After the glove compartment is locked, the re‐ mote control can be handed over, such as at a hotel, without the integrated key. Driver's side Raise the lid to open it.
Storage compartments Connection for an external audio device . Controls Storage tray for front cupholders The cupholder with the storage tray can be used for additional storage. To do this, place the storage tray in the cupholder. Only use the storage tray for small objects, such as keys or the remote control. Storage compartment in the rear Storage compartment is located in the rear center console. When not in use, stow the storage tray in the glove compartment net.
Controls Storage compartments Retaining strap No heavy objects Do not hang heavy objects from the hooks; otherwise, they may present a danger to passengers during braking and evasive ma‐ neuvers.◀ Storage compartments in the cargo area Storage compartment A storage compartment is located on the left side. Located on the right side is a storage compart‐ ment for the onboard vehicle tool kit, refer to page 206, and first aid kit, refer to page 218.
Storage compartments Online Edition for Part no.
Online Edition for Part no.
Driving tips This chapter provides you with information useful in dealing with specific driving and operating modes. Online Edition for Part no.
Driving tips Things to remember when driving Things to remember when driving Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Things to remember when driving Hot exhaust system Hot exhaust system High temperatures are generated in the exhaust system. Do not remove the heat shields installed and never apply undercoating to them. Make sure that flammable materials, e. g. hay, leaves, grass, etc. do not come in contact with the hot exhaust system during driving, while in idle po‐ sition mode, or when parked. Such contact could lead to a fire, and with it the risk of seri‐ ous personal injury as well as property dam‐ age.
Driving tips Things to remember when driving Objects within the range of movement of the pedals No objects in the area around the pedals Keep floor mats, carpets, and any other objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving and create the risk of an accident. Do not place additional floor mats over existing mats or other objects.
Loading Driving tips Loading Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. ▷ The combined weight of occupants and cargo should never exceed XXX kg or YYY lbs.
Driving tips Loading Load Securing cargo Lashing eyes in the cargo area The maximum load is the sum of the weight of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported. To secure the cargo there are four lashing eyes in the cargo area. Floor net Stowing cargo ▷ Cover sharp edges and corners on the cargo. The floor net can also be used to Secure the load and to store small parts.
Loading Securing cargo Always position and secure the cargo as described above; otherwise, it can endanger the car's occupants if sudden braking or swerving becomes necessary. Heavy or hard objects should not be carried loose inside the car; otherwise, they could be thrown around as a result of hard braking, sud‐ den swerves, etc., and endanger the occu‐ pants.◀ Roof-mounted luggage rack Note Roof racks are available as special accessories.
Driving tips Saving fuel Saving fuel Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. General information Your vehicle contains advanced technology for the reduction of fuel consumption and emis‐ sions.
Saving fuel Avoid high engine speeds Use 1st gear to get the vehicle in motion. Be‐ ginning with 2nd gear, accelerate rapidly. When accelerating, shift up before reaching high engine speeds. When you reach the desired speed, shift into the highest applicable gear and drive with the engine speed as low as possible and at a con‐ stant speed. As a rule: driving at low engine speeds lowers fuel consumption and reduces wear. The gear shift indicator of your vehicle indi‐ cates the most fuel efficient gear.
Driving tips Saving fuel At a glance The system includes the following EfficientDynamics functions and displays: ▷ ECO PRO bonus range, refer to page 174. ▷ ECO PRO tips driving instruction, refer to page 175 ▷ ECO PRO climate control, refer to page 174. Activate ECO PRO Press button repeatedly until ECO PRO is displayed in the instrument cluster. Configuring ECO PRO Via the Driving Dynamics Control The climate control is adjusted to be fuel-effi‐ cient.
Saving fuel Mark in the CHARGE area, arrow 1: display for energy recovered by coasting or when braking. Mark in the POWER area, arrow 2: display when accelerating. The efficiency of the driving style is shown by the color of the bar: ▷ Blue display: efficient driving style as long as the mark moves within the blue range. ▷ Gray display: adjust driving style, e. g. by backing off the accelerator pedal.
Driving tips Saving fuel ▷ Energy recovery. ▷ Climate control output. ▷ Coasting. Display ECO PRO tips ▷ Driving in the dynamic limit range and on steep uphill or downhill grades. ▷ Battery charge status temporarily too low or vehicle electrical system drawing exces‐ sive current. ▷ Cruise control activated. "ECO PRO Tips" The setting is stored for the profile currently in use. Coasting The concept The system helps to conserve fuel.
Saving fuel Driving tips Functional requirement The function is only available in ECO PRO mode. Calling up ECO PRO driving style analysis Via the Driving Dynamics Control Color code blue, arrow 1, and symbol, arrow 2: driving condition Coasting. Displaying EfficientDynamics info 1. "Vehicle Info" 2. "EfficientDynamics" 3. 1. Activate ECO PRO. 2. "EfficientDynamics" 3. Select the symbol.
Online Edition for Part no.
Mobility In order to always ensure your mobility, you will find important information on operating fluids, wheels and tires, maintenance and Roadside Assistance in the following. Online Edition for Part no.
Mobility Refueling Refueling Vehicle equipment 2. Turn the fuel cap counterclockwise. All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Hints 3. Place the fuel cap in the bracket attached to the fuel filler flap.
Refueling Mobility 1. Open the cover on the right side trim. To do this, turn the cap. 2. Pull the green knob with the fuel pump symbol. This releases the fuel filler flap. Observe the following when refueling The fuel tank is full when the filler nozzle clicks off the first time. Do not overfill the fuel tank Do not overfill the fuel tank; otherwise fuel may escape, causing harm to the environ‐ ment and damaging the vehicle.◀ Handling fuels Obey safety regulations posted at the gas station.
Mobility Fuel Fuel Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Fuel recommendation xx: comply with the current standard in each case.
Fuel Mobility Failure to comply with these recommendations may result in the need for unscheduled main‐ tenance.◀ Diesel Low-Sulfur Diesel The engine of your BMW is designed for diesel with low sulfur content: Ultra-Low Sulfur Diesel ASTM D 975-xx. xx: comply with the current standard in each case. Use only Ultra-Low Sulfur Diesel. The fraction of biodiesel in the fuel must not exceed 5 %, referred to as B5. Do not use gasoline. If you do fill the tank with the wrong fuel, e.g.
Mobility Fuel Refill in good time The reducing agent must be replenished as soon as the Reserve display appears, other‐ wise the engine cannot be restarted.◀ Diesel exhaust fluid on minimum The engine will continue to run even when the display shows --, as long as it is not switched off and all other operating condi‐ tions are satisfied, sufficient fuel for example. Engine does not start Do not continue driving to the limit of the remaining travel distance.
Fuel Suitable Diesel exhaust fluid ▷ Preferred: BMW Diesel Exhaust Fluid. With this bottle and its special adapter, Diesel exhaust fluid can be replenished simply and safely. Mobility 4. Press the bottle down, see arrow. The vehicle container will be filled. The container is full when the fill level in the bottle no longer changes. It is not pos‐ sible to overfill. ▷ Alternative: NOx reduction agent AUS 32 Diesel exhaust fluid can be purchased at your Service Center.
Mobility Fuel Do not dispose of empty bottles with house‐ hold waste unless this is permitted by local regulations. Reserve display The Reserve display will still ap‐ pear along with the remaining range after refilling. Engine can be started. After several minutes of driving, the Reserve indication goes out. Diesel exhaust fluid on minimum After filling, the indication -- is still displayed. Only after the display goes out can the engine -- be started. 1. Switch on the ignition.
Wheels and tires Mobility Wheels and tires Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Mobility Wheels and tires Maximum permissible speed Do not exceed 100 mph/160 km/h; other‐ wise, tire damage and accidents may result.◀ Tire inflation pressure values up to 100 mph/160 km/h 320i, 320i xDrive Tire size Pressure specifications in bar/PSI Front: 225/35 R 20 90 Y XL RSC 2.5 / 36 - - 3.0 / 44 Rear: 255/30 R 20 92 Y XL RSC T 135/80 R 17 102 M Tire size 2.2 / 32 2.2 / 32 Specifications in bar/PSI with cold tires 2.2 / 32 2.
Wheels and tires Mobility Tire size Pressure specifications in bar/PSI Tire size Pressure specifications in bar/PSI Front: 225/40 R 19 89 Y RSC 2.2 / 32 - - 2.4 / 35 Front: 225/45 R 18 91 Y RSC 2.2 / 32 - - 2.2 / 32 2.2 / 32 - - 2.4 / 35 2.5 / 36 - - 3.0 / 44 Rear: 255/35 R 19 92 Y RSC Front: 225/35 R 20 90 Y XL RSC Rear: 255/40 R 18 95 Y RSC 2.5 / 36 - - 3.0 / 44 Rear: 255/30 R 20 92 Y XL RSC Compact wheel T 135/80 R 17 102 M Rear: 255/35 R 19 92 Y RSC Speed up to a max.
Mobility Wheels and tires Tire size Pressure specifications in bar/PSI Tire size Pressure specifications in bar/PSI Front: 225/40 R 19 89 Y RSC 2.4 / 35 - 2.9 /42 2.6 / 38 225/45 R 18 91 V M+S A/S RSC 2.4 / 35 - 2.2 / 32 - - 2.4 / 35 2.4 / 35 - - 2.4 / 35 2.4 / 35 - - 2.6 / 38 2.5 / 36 - - 3.0 / 44 Rear: 255/35 R 19 92 Y RSC Front: 225/35 R 20 90 Y XL RSC 225/45 R 18 91 Y RSC 2.6 / 38 - - 3.
Wheels and tires Tire size Pressure specifications in bar/PSI Specifications in bar/PSI with cold tires 225/50 R 17 94 V M+S A/S RSC Pressure specifica‐ tions in bar/PSI Specifications in bar/PSI with cold tires 2.2 / 32 2.7 / 39 225/50 R 17 94 H M+S RSC 225/45 R 18 91 Y RSC Tire size Mobility 225/50 R 17 94 V M +S A/S RSC 2.4 / 35 2.9 /42 2.6 / 38 3.1 / 45 2.4 / 35 - - 2.6 / 38 2.6 / 38 - - 2.6 / 38 2.6 / 38 - - 2.8 / 41 2.7 / 39 - - 3.2 / 46 225/50 R 17 94 H M +S RSC 2.
Mobility Wheels and tires With high-speed tuning feature Tire size Tire size Pressure specifications in bar/PSI Specifications in bar/PSI with cold tires 225/50 R 17 94 H M 2.4 / 35 +S RSC 2.9 /42 225/45 R 18 91 Y RSC 3.1 / 45 2.6 / 38 225/45 R 18 95 V M +S XL RSC Front: 225/50 R 17 94 W RSC 2.4 / 35 - - 2.6 / 38 Rear: 255/45 R 17 98 W RSC Front: 225/45 R 18 91 Y RSC 2.6 / 38 - - 2.6 / 38 2.6 / 38 - - 2.
Wheels and tires Tire size Pressure specifications in bar/PSI Specifications in bar/PSI with cold tires Mobility Y: speed rating, before the R on ZR tires Speed letter Q = up to 100 mph, 160 km/h R = up to 106 mph, 170 km/h S = up to 112 mph, 180 km/h 225/45 R 18 91 Y RSC 2.7 / 39 3.
Mobility Wheels and tires All passenger car tires must conform to Fed‐ eral Safety Requirements in addition to these grades. the laboratory test wheel than the minimum re‐ quired by law. Treadwear The temperature grade for this tire is es‐ tablished for a tire that is properly inflated and not overloaded. Excessive speed, underinfla‐ tion, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
Wheels and tires Minimum tread depth Mobility In case of tire damage If there are indications of tire damage, re‐ duce your speed immediately and have the wheels and tires checked right away; other‐ wise, there is the increased risk of an accident. Drive carefully to the nearest service center. Have the vehicle towed or transported there. Otherwise, tire damage can become life threat‐ ening for vehicle occupants and also other road users.
Mobility Wheels and tires Approved wheels and tires Retreaded tires The manufacturer of your vehicle recom‐ mends that you use only wheels and tires that have been approved for your particular vehicle model. Possibly substantial variations in the de‐ sign and age of the tire casing structures can limit service life and have a negative impact on road safety.◀ For example, despite having the same official size ratings, variations can lead to body con‐ tact and with it, the risk of severe accidents.
Wheels and tires Do not exceed the maximum tire inflation pres‐ sure indicated on the side wall of the tire. Mobility Use Use only in pairs on the rear wheels, equipped with the tires of the following size: Run-flat tires ▷ 205/60 R 16. Label ▷ 225/50 R 17. ▷ 225/55 R 16. ▷ 225/45 R 18. Follow the chain manufacturer's instructions. Make sure that the snow chains are always sufficiently tight. Retighten as needed accord‐ ing to the chain manufacturer's instructions.
Mobility Engine compartment Engine compartment Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Engine compartment Mobility Hood Indicator/warning lamps Hints When the hood is opened, a Check Control message is displayed. Working in the engine compartment Never attempt to perform any service or repair operations on your vehicle without the necessary professional technical training. Closing the hood If you are unfamiliar with the statutory guide‐ lines, have any work on the vehicle performed only by a service center.
Mobility Engine oil Engine oil Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. trip, the status of the last, sufficiently long trip is displayed.
Engine oil Requirements Mobility Filler neck ▷ Vehicle is on level road. ▷ Manual transmission: shift lever in neutral position, clutch and accelerator pedals not depressed. ▷ Automatic transmission: selector lever in transmission position N or P and accelera‐ tor pedal not depressed. ▷ Engine is running and is at operating tem‐ perature. Performing a detailed measurement In order to perform a detailed measurement of the engine oil level: 1.
Mobility Engine oil Some types of oils in some cases are not avail‐ able in all countries. Approved oil types Gasoline engine BMW Longlife-01. BMW Longlife-01 FE. Diesel engine BMW Longlife-04. Additional information about the approved types of oils can be requested from the service center. Alternative oil types If the approved engine oils are not available, up to 1 US quart/liter of an oil with the following specification can be added: Gasoline engine API SM or superior grade specification.
Coolant Mobility Coolant Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Hints Symbol Meaning Maximum Minimum Filling 1. Let the engine cool. 2.
Mobility Maintenance Maintenance Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Maintenance Mobility correspondingly trained personnel and other authorized persons. Otherwise, use may result in operating problems for the vehicle.◀ Position There is an OBD socket on the driver's side for checking the primary components in the vehi‐ cle emissions. Emissions ▷ The warning lamp lights up: Emissions are deteriorating. Have the vehicle checked as soon as possible. Canadian model: warning light indi‐ cates the engine symbol.
Mobility Replacing components Replacing components Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Onboard vehicle tool kit 3. Squeeze the retainer spring, arrow 1, and fold up the wiper blade, arrow 2. 4.
Replacing components Mobility Headlamp glass Danger of burns Only change bulbs when they are cool; otherwise, there is the danger of getting burned.◀ Working on the lighting system When working on the lighting system, you should always switch off the lights af‐ fected to prevent short circuits. To avoid possible injury or equipment damage when replacing bulbs, observe any instructions provided by the bulb manufacturer.
Mobility Replacing components Accessing the turn signals and low beams Low beams Follow the general instructions on Lamps and bulbs, refer to page 206. 55-watt bulb, H7. 1. In the wheel house, loosen the two brack‐ ets and remove the cover. 1. Turn the cap counterclockwise and re‐ move. 2. Tilt the bulb down and then up to loosen it from the holder and remove. Turn signal 21-watt bulb, PY21W 1. If necessary, pull the inside trim of the wheel house slightly inward.
Replacing components Accessing the daytime running lights, high beams/headlamp flasher and parking lamps Follow the general instructions on Lamps and bulbs, refer to page 206. Mobility High beams/headlamp flasher 55-watt bulb, H7. 1. Tilt the bulb down and then up to loosen it from the holder and remove. 1. Open the hood, refer to page 199. 2. Turn the cap counterclockwise and re‐ move. 2. Pull the connector off the bulb. 3. Attach the connector to the new bulb. 4.
Mobility Replacing components Daytime running lights Headlamps 24-watt bulb, PW24W. 1. If necessary, remove the high beam bulb connector. 2. Remove the bulb holder. 3. Remove the bulb from the bulb holder. 1 Parking lamps / daytime running lights 2 Low beams/high beams/headlamp flasher 3 Turn signal Low beams and high beams are designed with xenon technology. 4. To insert the new bulb, proceed in reverse order of removal.
Replacing components 21-watt bulb, PY21W 1. In the wheel house, loosen the two brack‐ ets and remove the cover. Mobility Carefully raise the wheel house panel, ar‐ row 2. 2. Pull off the bulb connector, arrow 1. 2. If necessary, pull the inside trim of the wheel house slightly inward. Turn the bulb holder counterclockwise and remove. Turn the bulb, arrow 2. Left side of vehicle: turn clockwise. Right side of vehicle: turn counterclock‐ wise. Remove the bulb. 3.
Mobility Replacing components Tail lamps, bulb replacement 1. Open trunk lid. At a glance 1 Turn signal 2 Reversing lamp 3 Inside brake lamp 4 Tail lamps 5 Outside brake lamp Removing the exterior tail lamp 2. Use the screwdriver from the onboard ve‐ hicle tool kit to loosen the screw, arrow 1, and remove the cover, arrow 2. 3. Use the screwdriver handle to loosen the two nuts, arrows 1 and 2, and remove. The tail lamp is still attached to a rubber mount on the outside.
Replacing components 5. Remove the connecting line from the clip on the bulb holder. Mobility component, arrow 2. Make sure that the tail lamp engages in the rubber mount. 6. Release the catch at the top on the con‐ nector of the connecting line and remove the connector from the bulb holder. Replacing the bulbs 1. Loosen the four fasteners, arrow 1, on the bulb holder and remove the bulb holder from the tail lamp, arrow 2. 4. Screw the tail lamp on with the two nuts. 5.
Mobility Replacing components Replacing the reversing lamp and inner brake lamp 1. Loosen the two holders, arrow 1 and pull down on the lamp holder to remove, ar‐ row 2. These lamps are made using LED technology. Contact your service center in the event of a malfunction. Changing wheels Hints The vehicle equipment does not include a spare tire. When using run-flat tires or tire sealants, a tire does not need to be changed immediately in the event of pressure loss due to a flat tire. 2.
Replacing components Battery replacement Use approved vehicle batteries only Only use vehicle batteries that have been approved for your vehicle by the manufacturer; otherwise, the vehicle could be damaged and systems or functions may not be fully availa‐ ble.◀ After a battery replacement, have the battery registered on the vehicle by your service cen‐ ter to ensure that all comfort functions are fully available and that any Check Control mes‐ sages of these comfort functions are no longer displayed.
Mobility Replacing components 3. Remove the cover from one side, arrow 3. 4. Press the four fasteners and remove the cover. Information on the fuse types and locations is found on a separate sheet. Attaching the covers 1. When attaching the cover, make sure that all four fasteners are engaged. 2. Attach the cover under the rubber lip and then thread it between the bars. 3. Press down on the holder and tighten the three screws. In the cargo area Raise the cargo floor panel.
Breakdown assistance Mobility Breakdown assistance Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Mobility Breakdown assistance if it can be established, are transmitted to the BMW Response Center. Storage ▷ If the LED is flashing, but the BMW Re‐ sponse Center can no longer be heard via the speaker, you can nevertheless still be heard for the BMW Response Center. Initiating an Emergency Request automatically Under certain conditions, an Emergency Re‐ quest is automatically initiated immediately af‐ ter a severe accident.
Breakdown assistance Mobility Do not touch live parts To avoid the risk of potentially fatal in‐ jury, always avoid all contact with electrical components while the engine is running.◀ Preparation 1. Check whether the battery of the other ve‐ hicle has a voltage of 12 volts. This infor‐ mation can be found on the battery. 2. Switch off the engine of the assisting vehi‐ cle. 3. Switch off any electronic systems/power consumers in both vehicles.
Mobility Breakdown assistance If the first starting attempt is not success‐ ful, wait a few minutes before making an‐ other attempt in order to allow the dis‐ charged battery to recharge. Tow truck 3. Let both engines run for several minutes. 4. Disconnect the jumper cables in the re‐ verse order. Check the battery and recharge if necessary.
Breakdown assistance Tow truck Mobility Should it prove impossible to avoid mounting the tow bar at an offset angle, please observe the following: ▷ Maneuvering capability is limited during cornering. ▷ The tow bar will generate lateral forces if it is secured with an offset. Tow rope Have your vehicle transported with a tow truck with a so-called lift bar or on a flat bed. Do not lift the vehicle Do not lift the vehicle by the tow fitting or body and chassis parts; otherwise, damage may result.
Mobility Breakdown assistance ▷ Avoid lateral loading of the tow fitting, e.g., do not lift the vehicle by the tow fitting. Otherwise, damage to the tow fitting and the vehicle can occur.◀ 5. Stop at a suitable location, remove the tow bar or rope, and switch off the hazard warning system. 6. Have the vehicle checked. Screw thread Press on the mark on the edge of the cover to push it out. Tow-starting Automatic transmission Do not tow-start the vehicle.
Care Mobility Care Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Intense soiling and road salt can damage the vehicle.
Mobility Care 2. Engage transmission position N. 3. Switch the engine off. In this way, the ignition remains switched on, and a Check-Control message is dis‐ played. Do not turn off the ignition in the car wash Do not turn off the ignition in the car wash; otherwise, the transmission position P is engaged and damages can result.◀ To start the engine: 1. Depress the brake pedal. 2. Press the Start/Stop button. Pressing the Start/Stop button without step‐ ping on the brake turns the ignition off.
Care Mobility To guard against discoloration, such as from clothing, provide leather care roughly every two months. ularly when they have been exposed to road salt. Clean light-colored leather more frequently be‐ cause soiling on such surfaces is substantially more visible. Rubber components Use leather care products; otherwise, dirt and grease will gradually break down the protective layer of the leather surface.
Mobility Care Use only a mild soapy solution, with the safety belts clipped into their buckles. Do not allow the reels to retract the safety belts until they are dry. Carpets and floor mats No objects in the area around the pedals Keep floor mats, carpets, and any other objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving and create the risk of an accident.
Care Online Edition for Part no.
Online Edition for Part no.
Reference This chapter contains the technical data and an index that will quickly take you to the information you need. Online Edition for Part no.
Reference Technical data Technical data Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equip‐ ment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Dimensions BMW 3 Series Limousine Width with mirrors inches/mm 79.9/2,031 Width without mirrors inches/mm 71.
Technical data Reference 328i Approved gross vehicle weight lbs 4,365/4,420 kg 1,980/2,005 Load lbs/kg 900/408 Approved front axle load lbs/kg 2,015/914 Approved rear axle load lbs/kg 2,510/1,139 Approved roof load capacity lbs/kg 165/75 Cargo area capacity cu ft/l 16.
Reference Technical data 328i xDrive Approved gross vehicle weight lbs/kg 4,585/2,080 Load lbs/kg 900/408 Approved front axle load lbs/kg 2,170/984 Approved rear axle load lbs/kg 2,555/1,159 Approved roof load capacity lbs/kg 165/75 Cargo area capacity cu ft/l 16.
Technical data Reference 328d xDrive Approved rear axle load lbs/kg 2,525/1,145 Approved roof load capacity lbs/kg 165/75 Cargo area capacity cu ft/l 16.9/480 Capacities Fuel tank US gal/liters Notes Gasoline: 15.8/60 Fuel quality, refer to page 182 Diesel: 15/57 Online Edition for Part no.
Reference Everything from A to Z Everything from A to Z Index A ABS, Antilock Brake Sys‐ tem 116 ACC, Active Cruise Control with Stop & Go 121 Acceleration Assistant, refer to Launch Control 74 Activated-charcoal filter 149 Active Blind Spot Detec‐ tion 114 Active Cruise Control with Stop & Go, ACC 121 Adaptive brake lights, refer to Brake force display 115 Adaptive Light Control 92 Additives, oil 201 Adjustments, seats/head re‐ straints 49 After washing vehicle 224 Airbags 96 Airbags, indicator/warning l
Everything from A to Z Brake discs, breaking in 166 Brake force display 115 Brake lamps, brake force dis‐ play 115 Brake lights, adaptive 115 Brake pads, breaking in 166 Braking, hints 167 Breakdown assis‐ tance 217, 218 Breaking in 166 Brightness of Control Dis‐ play 89 Bulb replacement 206 Bulb replacement, front 207 Bulb replacement, halogen headlamps 207 Bulb replacement, rear 212 Bulb replacement, xenon headlamps 210 Bulbs and lamps 206 Button, RES 124 Button, Start/Stop 63 Bypassing, refer to Jumpsta
Reference Everything from A to Z Control Display 18 Control Display, settings 88 Controller 18, 19 Control systems, driving sta‐ bility 116 Convenient opening 38 Coolant 203 Coolant temperature 81 Cooling function 145, 147 Cooling, maximum 147 Cooling system 203 Corrosion on brake discs 168 Cruise control 128 Cruise control, active with Stop & Go 121 Cruising range 81 Cupholder 161 Current fuel consumption 82 D Damage, tires 195 Damping control, dy‐ namic 117 Data, technical 230 Date 81 Daytime running l
Everything from A to Z Engine oil additives 201 Engine oil change 202 Engine oil filler neck 201 Engine oil temperature 80 Engine oil types, alterna‐ tive 202 Engine oil types, ap‐ proved 202 Engine start during malfunc‐ tion 35 Engine start, jump-start‐ ing 218 Engine start, refer to Starting the engine 64 Engine stop 65 Engine temperature 80 Entering a car wash 223 Equipment, interior 151 ESP Electronic Stability Pro‐ gram, refer to DSC 116 Exchanging wheels/tires 195 Exhaust system 167 Exterior mirror,
Reference Everything from A to Z Hill start assistant, refer to Drive-off assistant 120 Hints 6 Holder for beverages 161 Homepage 6 Hood 199 Horn 14 Hotel function, trunk lid 41 Hot exhaust system 167 HUD Head-up Display 89 Hydroplaning 167 I Ice warning, refer to External temperature warning 81 Icy roads, refer to External temperature warning 81 Identification marks, tires 193 Identification number, refer to Important features in the en‐ gine compartment 198 iDrive 18 Ignition key, refer to Remote contr
Everything from A to Z Low-Sulfur Diesel 183 Luggage rack, refer to Roofmounted luggage rack 171 Lumbar support 51 M Maintenance 204 Maintenance require‐ ments 204 Maintenance, service require‐ ments 82 Maintenance system, BMW 204 Malfunction displays, refer to Check Control 78 Manual air distribu‐ tion 145, 148 Manual air flow 145, 148 Manual mode, transmis‐ sion 73 Manual operation, door lock 40 Manual operation, exterior mirrors 57 Manual operation, fuel filler flap 180 Manual operation, Park Dis‐ tanc
Reference Everything from A to Z Park Distance Control PDC 130 Parked-car ventilation 149 Parked vehicle, condensa‐ tion 168 Parking aid, refer to PDC 130 Parking assistant 138 Parking brake 67 Parking lamps 91 Particulate filter 167 Passenger side mirror, tilting downward 57 Pathway lines, rearview cam‐ era 134 PDC Park Distance Con‐ trol 130 Pedestrian warning with city braking function 110 Personal Profile 35 Pinch protection system, glass sunroof 48 Pinch protection system, win‐ dows 46 Plastic, care
Everything from A to Z Settings, locking/unlock‐ ing 43 Settings on Control Dis‐ play 88 Settings, storing for seat, mir‐ ror 55 Shifting, automatic transmis‐ sion 71 Shifting, manual transmis‐ sion 71 Shift paddles on steering wheel 73 Side airbags 96 Side View 135 Signaling, horn 14 Signals when unlocking 43 Sitting safely 49 Size 230 Slide/tilt glass roof 47 Snow chains 197 Socket 155 Socket, OBD Onboard Diag‐ nostics 204 Soot particulate filter 167 SOS button 217 Spare fuse 215 Specified engine oil typ
Reference Everything from A to Z Tow truck 221 TPM Tire Pressure Moni‐ tor 99 Traction control 117 TRACTION program, Dy‐ namic Driving Control 117 Transmission, automatic 71 Transmission, manual 71 Transporting children safely 59 Tread, tires 194 Trip computer 87 Triple turn signal activa‐ tion 68 Trip odometer 81 Truck for tow-starting/ towing 221 Trunk lid 40 Trunk lid, emergency unlock‐ ing 41 Trunk lid, hotel function 41 Trunk lid opening with notouch activation 42 Trunk lid via remote con‐ trol 38 Tu
More about BMW The Ultimate Driving Machine 01 40 2 926 810 ue bmwusa.com *BL292681000Y* Online Edition for Part no.