Owner's Manual

3. Unscrew the bulb holder counterclockwise.
4. Remove the bulb and replace it.
5. Insert the new bulb and attach the cover in
the reverse order.
Parking lamps
Follow the general instructions on lamps and
bulbs, refer to page 240.
These lamps are made using LED technology.
Please contact your service center in the event
of a malfunction.
Front fog lamps
Follow the general instructions on lamps and
bulbs, refer to page 240.
35-watt bulb, H8
1.
Carefully pull out the grill toward the front.
2. Remove the screws.
3. Pull the lamp out toward the front.
4. Remove the bulb and replace it.
5. Insert the new bulb and attach the cover in
the reverse order.
Tail lamps, bulb replacement
At a glance
1 Turn signal
2 Backup lamp
3 Rear fog lamp*
4 Tail lamp
5 Brake lamp
Turn signal, brake, tail, and license
plate lamps
Follow the general instructions on lamps and
bulbs, refer to page 240.
These lights are made using LED technology.
Contact your service center in the event of a
malfunction.
Seite 242
242
Online Edition for Part no. 01 41 2 604 413 - 03 10 500
Replacing components