User guide

ISTA/P - User Documentation Page 25

Vehicle Programming in Service Applications of 131

Version V2.31.0/August 08

Retrofitting and conversions

Individual retrofits for the model series will only be offered by ISTA/P if they are actually

possible. This prevents incorrect programming of control modules. If the retrofit is not

offered by ISTA/P by mistake, please consult Technical Parts Support via the ASAP

Portal.

Note:

The items displayed in ISTA/P may differ, depending on equipment fitted and

national market specification.

Only the items specified in the Electronic Parts Catalogue (Group EPC) are approved for

retrofitting.

Explanatory notes about individual retrofits and conversions available in ISTA/P will be

supplied by Technical Support as part of the fault elimination measures.

Procedure for retrofitting or conversion of systems requiring programming or

encoding:

• Read out vehicle data with ISTA/P and determine measures plan. See Section:

Starting new session with ISTA/P, select "Vehicle" tab.

• Select "Conversions".

• Select retrofit or modification system (e.g. "PDC").

• After selecting all retrofits or conversions, select "Determine measures plan".

• The selected retrofits or conversions are itemized in the action list.