Owner`s manual

8. Locate pins 7 & 8 (2) and carefully remove them

from the terminal housing (1).

9. Bend the wires for pin 7 & 8 back away from the

connector

10. Wrap each terminal separately with electrical tape

and tape them to the wiring harness.

11. Reassemble the connector.

12. Attach the ULF Control Module (F) to the

mounting bracket (H) P/N 84 13 6 924 553 using

three M5 hex nuts (J) P/N 63 21 1 371 401.

13. Install the ULF Control Module-mounting bracket

(H) using four clip nuts P/N 61 13 1 372 033,

which need to be placed onto the left and right

carrier bracket in order to install the four M5 Hex

bolts (K), P/N 07 11 9 902 932.