Owner`s manual

11. Bend the wires for pin 7 & 8 back away from the

connector

12. Wrap each terminal separately with electrical tape

and tape them to the wiring harness.

13. Reassemble the connector.

14. Locate the black 54-pin connector and white

FAKRA connector.

15. Slide the ULF control module (1) into the open

area behind the amplifier.

15. Secure the ULF Control Module (1) to the interior

of the support structure using two M5 hex bolts (2

& 3), P/N 07 11 9 902 932.

16. Reinstall the trim panel