Telephone Users Manual. For Bluetooth phones and CPT 9000.
A mobile phone lets you stay in touch wherever you go. This Owner's Manual will help you learn how to easily operate your mobile phone using features built into your vehicle. We wish you an enjoyable driving experience.
Contents Notes 2 2 2 Using this Owner's Manual Symbols used Status at time of printing Safety notes 3 Exposure to radio frequency technology 3 For your own safety 3 Settings 3 Using the mobile phone in the car 3 Using the mobile phone in the vicinity of the car 3 Antenna 13 13 14 14 14 14 15 15 Phone book Dialing from the phone book Adding digits to phone numbers Lists Dialing from a list Deleting individual entries Deleting the entire list Touch Tone dialing Operation by voice control* Getting starte
Notes Using this Owner's Manual Status at time of printing This Owner's Manual instructs you how to operate your mobile phone using the multi-function steering wheel, Display and the voice input system*. BMW pursues a policy of continuous, on-going development of the equipment and accessories that ensures the highest quality standards combined with advanced, state-of-the-art technology for BMW products.
Safety Notes Exposure to radio frequency technology For your own safety BMW strongly recommends the use of a base plate with a snap-in adapter* in your car. The use of this special equipment allows the mobile phone to operate via the external antenna, enabling the phone to decrease the output power. This reduces electromagnetic exposure. A car phone provides a range of services and may even be employed to save lives. Safety instructions are contained in the separate Owner's Manual for your mobile phone.
Overview Depending on your handset, you can connect your Bluetooth phone via the Bluetooth interface or the CPT 9000 via the cradle to your vehicle. Getting started with your Bluetooth phone, refer to page 5 Getting started with your BMW CPT 9000, refer to page 11 The telephone can be operated using: The multi-function steering wheel* The Display* The voice input system* For how to operate your mobile phone, please read the separate Owner's Manual.
Getting started with your Bluetooth phone The principle What is…? Your car is equipped with a Bluetooth portable phone interface. As soon as you have performed a once-only pairing procedure in the car, you will also be able to operate a Bluetooth mobile phone via: The Display The buttons on the steering wheel* The voice input system* This feature requires a mobile phone that supports the Bluetooth interface. Up to four mobile phones can individually be paired to the vehicle.
Inserting the Snap-in adapter Inserting the mobile phone 1. Press button 1. Take out the cover 1. 2. Insert the snap-in adapter and press down until it engages. Remove the protective plug from the mobile phone's antenna connector if necessary, so that the mobile phone can be engaged in the cradle. 2. Insert the mobile phone and press down lightly until it snaps into place. The battery is charged from ignition key position 1.
Activating Bluetooth in your vehicle 1. Press the button to call up the start menu 2. 3. Select the i menu and press the controller Select "Communication settings" and press the controller Select "Bluetooth" and press the controller Select "Settings" and press the controller. Select "Bluetooth communication active" and press the controller to activate the connection. 4. 5. 6. 2. 3. Call up i menu by pressing the controller Select "Communication settings" and press the controller 4. 5.
Pairing In order to pair, you must enter a random passkey both via the mobile phone and via the Display. The passkey can be any number that you choose up to 16 digits long. 7. Depending on your mobile phone, you will be prompted by the mobile phone or by the Display to enter the passkey. Via the Display: 8. Select "Add device" and press the controller 9. Enter passkey. Depending on the mobile phone, you will have approximately 30 seconds to enter the passkey on the mobile phone and on the Display.
List of paired mobile phones Deleting mobile phone in the vehicle All mobile phones that are paired are displayed in a list. The mobile phone, which is at the top of the list, has the highest priority and the vehicle will try to connect to this device first. If the device is not available, the vehicle will proceed with the next device at the list. You can alter the order in which the mobile phones are displayed at the list.
De-activating Bluetooth connection Telephoning via the hands-free unit If the Bluetooth connection is de-activated, you can no longer operate the mobile phone via the vehicle. To de-activate the Bluetooth connection between your vehicle and your mobile phone temporarily: 1. Take the mobile phone out of the cradle and switch it off 2. Press the button to call up the start menu A conversation that you started outside the car can be continued inside the car, via the hands-free unit.
Getting started with your BMW CPT 9000 To operate the BMW mobile phone using the equipment in the vehicle, it must be placed in the cradle. When using the V60S move button (1) to the back position. This will raise the connector (2) to the correct position in order to insert the handset. While using BMW Assist, you will not be able to operate the BMW mobile phone until after you have completed the service.
General phone instruction You can use the following functions via the Display: Entering unlock code with portable phone inserted* Dialing phone number Phone book Top 8 Redialing Displaying accepted calls Displaying missed calls Emergency call, Assist Text messages/SMS2 Accepting a call ***** or Name or # Select "Accept" and press the controller. Operation using the display Rejecting a call 1. Select "Reject" and press the controller. Press button.
4. Select "Dial number" and press the controller. Dialing from the phone book 1. Select "Phone" and press the controller. 2. Select "A-Z" and press the controller. An alphabetical listing of all the entries in the phone book appears on the Display. To run a targeted search for an entry, select the first letter of the entry and press the controller. The first entry that starts with the letter is displayed. Select the desired entry. Ending a call 1. If necessary, select the telephone number 3. 2. 3.
Adding digits to phone numbers Dialing from a list You can add other digits to a phone number stored in the phone book, e.g. to call a specific extension: 1. Select "Phone" and press the controller 2. Select "A-Z" and press the controller 3. Select the desired entry 4. Press the controller. Other menu items are displayed 5. Select "Add digits" and press the con-troller 6. To supplement the phone number: Select digits individually and press the controller 7. Select "Dial number" and press the controller.
2. 3. 4. Press the controller. Other menu items are displayed Select "Keypad" and press the controller Select the desired digits and press the controller. Each digit is sent immediately. Deleting the entire list 1. 2. Select an entry from the list Press the controller. Other menu items are displayed 3. Select "Delete all numbers" and press the controller. The list is deleted.
Canceling operation via voice Briefly press the or button on steering wheel {Cancel}. In dialogs where text of any kind can be spoken, e.g. a name, canceling is only possible using the button. The dialog is automatically interrupted when an incoming call is received. Voice commands In addition to the commands described in this Owner's Manual, alternative commands are often possible for the same functions, e.g.: {Dial name} or {Name}. Digits from zero to nine are understood.
Calling Dialing phone number 1. {Dial number}. The dialog for establishing a telephone connection is called up 2. Say the phone number. For telephone calls abroad, say {Plus} and then the country code 3. {Dial}. The connection to the desired subscriber is established. Correcting phone number After the last spoken sequence of digits has been repeated by the system, you can delete this sequence of digits. {Correct number}. The digits are deleted.
Notes The voice commands were available in English on going to print. Other languages are currently not available.
Calling sender 1. 2. 3. Select the desired text message and press the controller. The text message is displayed Select "Options" and press the controller Select "Call sender" and press the controller. The selected sender is called. Entering unlock code* (only available for CPT 9000) If you are asked to enter the Unlock Code by a message on the Display: 1. Select "Phone" and press the controller Deleting text messages/SMS 1. Select the desired text message and press the controller.
More about BMW The Ultimate Driving Machine PART NUMBER ue E60, E63, E64 Cell. Prep. bmwusa.