Technical data

I
njector
Remove Injector Check Injection system
27
Injector check
CAUTION
Check injection valve for:
- Function
- Injection pressure (ref figure with pintle type
nozzle)
Be sure to observe a maximum of
cleanliness when working on the fuel
system
- Remove injection pipe and leak-off-line
- Loosen M6 hex nut and remove injector
from the cylinder head together with holding
bracket
NOTE
During removal and installation of the
injector, pay attention to the sealing
washer in the cylinder head
Position of the sealing disc: the side with a
recess towards the injection nozzle. The sealing
washer must seal properly.
Fuel Injection Equipment
Remarks
Injection Pump
Bosch type code
Bosch No
BMW Part No
PFE 1Q 55/19
0 414 050 996
1351 1329 656
With second hole in housing
(for automatic venting)
Injector Assy
Bosch type code
Bosch No
BMW Part No
-
0432 297 022
1351 1329 667
Nozzle
Bosch type code
Bosch No
BMW Part No
DNO SD 21
0434 250 001
1353 1329 669
Injection pressure 135 bar