Earglove BlueVoice™ ® © 2004 Fellowes, Inc. Part No.
Notice Earglove™ and BlueVoice™ are registered trademarks of Body Glove . ® This Users Guide is published without warranty as to the Guide, and it provides no warranty in the referenced product except as provided in the End User Limited Product Warranty. Improvements and modifications to this manual, including those necessitated by typographical errors, inaccuracies or improvements to equipment may be made at any time and without notice. This device complies with part 15 of the FCC Rules.
Charging & LED Indicator Light Table Battery Level Indication The battery level can be checked in standby mode or when connected by pressing and holding the Answer/End button, then sliding and holding the Volume switch upward simultaneously. The red LED Indicator Light will flash as follows: Status LED Indicator Light Color Power Off No LED light — Power Up and Down LED light is on for 1.
Patented Self-Adjusting Microphone Microphone sensitivity automatically adjusts for you when you extend or retract the microphone. Microphone Sensitivity Microphone Position Slightly Higher Extended Slightly Lower Retracted Turning Headset On/Off To Turn the Headset On Press and hold the On/Off switch for 2 seconds. If the headset is already paired to a mobile phone and the phone is turned on, the LED Indicator Light will flash green for 1.
2. Voice Dialing: If your phone includes a voice dialing mode, you can place calls with voice commands. Make sure the phone and the headset are on and within range of each other. Press the Answer/End button on the headset once, then when prompted, voice dial as you normally would. Please refer to your phone’s owners manual for more information on voice dialing. PLEASE NOTE: The LED Indicator Light flashes green once every second during calls to indicate phone communication.
NOTES ______________________________________________________________________ Technical Specifications ______________________________________________________________________ Earpiece Frequency Response ......................................................................................................................300 to 3400 Hz ______________________________________________________________________ Distortion (THD %) ...................................................................................