Technical data

Raise the front wheel, insert
axle 3 and tighten to specified
torque.
Quick-release axle, front,
in axle holder
30 Nm
Remove the front-wheel stand.
without centre stand
OE
Remove the auxiliary stand.
Firmly compress the front forks
several times.
Tighten axle clamping screw 2
to the specified torque.
Clamp of quick-release
axle
19 Nm
with BMW Motorrad ABS
OE
Insert the ABS sensor into its
bore and install screw 1.
The cable of the wheel-
speed sensor could chafe
through if it comes into contact
with the brake disc.
Make sure that the sensor
cable is routed correctly.
Make sure that the ABS sensor
cable is routed as shown
here.
8
100
z Maintenance