Technical data

Bulb for high-beam
headlight
H7/12V/55W
Bulb for low-beam head-
light
H7/12V/55W
Insert the bulb; make sure that
projection 7 is correctly posi-
tioned (high-beam headlight
down / low-beam headlight up)
and make check that the bulb
engages correctly.
Close and lock spring clips 5.
Connect plug 4.
Install cover 2 (low-beam head-
light) or cover 3 (high-beam
headlight).
Replacing parking-light
bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
8
106
z Maintenance