Technical data

Turn bulb socket 3 clockwise
to install.
Connect plug 2.
Install cap 1.
Replacing the brake light
and rear light bulbs
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screws 1.
Pull the bulb housing to the
rear to remove.
Press bulb 2 into its socket
and turn it counter-clockwise to
remove.
8
108
z Maintenance