Technical data

beam throw so as not to dazzle
oncoming traffic.
A Neutral position
B Position for heavy load
Seat
Removing seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use the ignition key to turn
seat lock 1 counter-clockwise
and hold it in this position.
Lift seat 2 at the rear and re-
lease the key.
Remove the seat.
Place the seat, upholstered
side down, on a clean surface.
Installing seat
Push seat 2 forward into hold-
er 3.
Firmly press down on the seat
at the rear.
The seat engages with an aud-
ible click.
Helmet holder
Securing helmet to
motorcycle
Remove the seat ( 56)
4
56
z Operation