Technical data

Remove screws 1 securing the
right mirror.
Remove the mirror.
Remove two screws 1.
Remove short screw 2.
Remove three screws 3.
Lift the side panel up to re-
move.
Turn cap of the coolant filler
neck 1 counter-clockwise to
open.
Top up the coolant to the spe-
cified level.
Turn the cap of the coolant
filler neck clockwise to close.
Slip the side section behind the
bottom side panel, making sure
that guide 4 of the side section
engages mount 5.
Install three screws 3
Install short screw 2.
8
94
z Maintenance