Technical data

Press and hold down MODE
button 1 when the stopwatch
is not running.
The stopwatch is reset to zero.
Average speed A2 is also re-
set.
Operating-hours counter
H
The operating hours H coun-
ted represent the time logged by
the motorcycle in operation. The
operating-hours counter can-
not be reset and can be viewed
only when the motorcycle is at a
standstill.
Setting clock CLK
Switch on the instrument panel
or bring the motorcycle to a
stop, as applicable.
Repeatedly press MODE but-
ton 1 until clock CLK appears
in the left half of the multifunc-
tion display.
Press and hold down MODE
button 1.
The hours reading flashes.
Use UP button 2 and DOWN
button 3 to set the hour.
Press the MODE button.
The minutes reading flashes.
Use the UP button and the
DOWN button to set the
minutes.
Press the MODE button.
The seconds reading flashes.
Press the UP button or the
DOWN button.
The seconds are set to zero.
4
28
z Operation