Technical data

Press MODE button 1.
0-24 for 24-hour clock or
0-12 for 12-hour clock.
Press UP button 2 or DOWN
button 3.
The display mode toggles each
time a button is pressed.
Either press and hold down the
MODE button or wait without
pressing any button.
The settings are accepted.
Operating lap timer LAP
Repeatedly press MODE but-
ton 1 until lap timer LAP ap-
pears in the left half of the mul-
tifunction display.
With the LAP timer stopped,
press UP button 2.
The LAP timer counts in
seconds, starting at the time
shown on the display.
LAP flashes on the display if
some other function is selected
while the lap timer is running.
The lap timer runs on even if
the instrument panel switches
itself off.
With the lap timer running,
press the UP button.
The lap timer shows the time
elapsed.
4
29
z Operation