Technical data

With the LAP timer running,
press DOWN button 3.
The reading is saved, timing
starts again at zero.
A maximum of ten readings
can be saved. Once the ten
slots in memory are full, there
is no reaction when the DOWN
button is pressed.
With the LAP timer stopped,
press and hold down MODE
button 1.
The lap timer is reset.
The readings saved beforehand
are deleted.
Viewing lap times saved in
memory
Bring the motorcycle to a
standstill.
Repeatedly press MODE but-
ton 1 until LAP appears in the
left half of the multifunction
display.
The left side of the multifunc-
tion display shows the time
registered by the stopwatch for
the lap shown on the right.
Press UP button 2.
The next lap time appears on
the display.
Selecting display colour
Switch on the ignition and the
instrument panel or bring the
motorcycle to a standstill, as
applicable.
4
30
z Operation