Technical data

Adjusting spring preload
for rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use adjusting rings 1 and 2 to
adjust spring preload.
Release the lock by turning
adjusting ring 1 in direction b
with the tool from the toolkit.
To turn the adjusting rings, en-
gage tools 3 in such a way that
hook a or hook b securely en-
gages a groove.
The adjusting rings can be
turned in either direction
without turning the tool over:
simply engage the appropriate
hook in a groove.
If you want to increase spring
preload, turn adjusting ring 2 in
direction a.
If you want to reduce spring
preload, turn adjusting ring 2 in
direction b.
Tighten the lock by turning ad-
justing ring 1 in direction a with
the tool from the toolkit.
4
38
z Operation