Technical data

Coolant
Checking coolant level
Make sure the ground is level
and firm and hold the motor-
cycle upright.
Risk of burns from escaping
coolant.
The hot cooling system is pres-
surised. Allow the coolant to cool
down before opening the radiator
cap.
Once the radiator has cooled,
remove cap 1 by turning it
counter-clockwise.
Coolant, specified level
Antifreeze
Top plates just covered by
coolant (MIN level)
4 mm (MAX level, covering
the top plates)
If the coolant level is too low:
Top up the coolant.
Install the radiator cap and turn
it clockwise to close.
Topping up coolant
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Risk of burns from escaping
coolant.
The hot cooling system is pres-
surised. Allow the coolant to cool
down before opening the radiator
cap.
Once the radiator has cooled,
remove cap 1 by turning it
counter-clockwise.
7
71
z Maintenance