Technical data

The types of bulb fitted to
your motorcycle are listed
in the section entitled "Technical
data".
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Replacing low-beam/high-
beam headlight bulb
Disengage retaining straps 1 of
the light-top shield on left and
right.
Pull the light-top shield forward
at the top edge.
Disconnect plug 1.
Remove rubber cap 2.
Release spring clips 3 at top
and bottom and swing them
aside.
Remove bulb 4.
7
76
z Maintenance