Operation Manual

Correct the clearance by turn-
ing the end silencer to the ap-
propriate position.
Clearance between silen-
cer and tyre
min 20 mm
Position the clamp as shown.
Tighten screw 3 of the ball-
joint clamp to the specified
tightening torque.
Silencer with ball-joint
clamp on manifold
35 Nm
Hold the silencer cover 2
in position and install three
screws 1.
without centre stand generation
II
OA
Remove the rear-wheel stand.
Front-wheel stand
Installing front-wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support motorcycles not fitted
with a centre stand or without
other auxiliary stands. A motor-
8
102
z Maintenance