Operation Manual

Press bulb 2 into its socket
and turn it counter-clockwise to
remove.
Replace the defective bulb.
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Press bulb 2 into its socket
and turn it clockwise to install.
Seat the glass in the turn indic-
ator housing.
Install screw 1.
LED rear light
If the number of LEDs in the rear
light that have failed exceeds the
number stated in the Technical
Data below, the rear light must
be replaced. Under these cir-
cumstances:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
8
109
z Maintenance