Operation Manual

ABS fault
ABS warning light shows.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
not available.
You can continue to ride the
vehicle, but make due provi-
sion for the fact that the ABS
function is not available. Bear
in mind the more detailed in-
formation on situations that can
lead to an ABS fault ( 73).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ASC intervention
with Automatic Stability Con-
trol
OE
General warning light quick-
flashes yellow.
ASC symbol appears on
the display.
The ASC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The warning light flashes
for longer than ASC intervention
lasts. This affords the rider visual
feedback on control intervention
even after the critical situation
has been dealt with.
ASC self-diagnosis not
completed
with Automatic Stability Con-
trol
OE
ASC symbol flashes.
Possible cause:
Self-diagnosis did not complete,
so the ASC function is not avail-
able. The engine must be run-
ning and the motorcycle must
reach a speed of at least 5 km/h
in order for ASC self-diagnosis to
complete.
Pull away slowly. Bear in mind
that the ASC function is not
available until self-diagnosis has
completed.
ASC deactivated
with Automatic Stability Con-
trol
OE
ASC symbol appears on
the display.
Possible cause:
The rider has switched off the
ASC system.
Switch on the ASC function.
3
34
z Status indicators