Operation Manual

BMW Motorrad Integral
ABS
Deactivating ABS function
Bring the motorcycle to a stop
or, if the motorcycle is at a
standstill, switch on the igni-
tion.
Press and hold down button 1
until the ABS warning light
changes status.
ABS warning light shows.
with Automatic Stability Con-
trol
OE
Initially, the ASC symbol
changes status. Press and
hold down button 1 until the
ABS warning light responds.
Under these circumstances
there is no change in the ASC
setting.
Release button 1 within two
seconds.
ABS warning light remains
ON.
The ABS function is deactiv-
ated, but the integral function
remains active.
Activating ABS function
Press and hold down button 1
until the ABS warning light
changes status.
ABS warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
The ABS warning light re-
mains off or continues to
flash.
The ABS function is activated.
4
48
z Operation