Operation Manual

You also have the option of
switching the ignition off and
then on again.
An ABS fault has occurred
if the ABS warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
Automatic Stability
Control ASC
with Automatic Stability Con-
trol
OE
Deactivating ASC function
Switch on the ignition.
You have the option of de-
activating the ASC function
while the motorcycle is on the
move.
Press and hold down button 1
until the ASC symbol changes
status.
ASC symbol appears on
the display.
Release button 1 within two
seconds.
ASC symbol continues to
show.
The ASC function is deactiv-
ated.
Activating ASC function
Press and hold down button 1
until the ASC symbol changes
status.
ASC symbol no longer
shows; if self-diagnosis has
not completed the ASC warning
light starts flashing.
Release button 1 within two
seconds.
ASC symbol still does not
show or continues to flash.
The ASC function is activated.
4
49
z Operation