Operation Manual

You also have the option of
switching the ignition off and
then on again.
An ASC fault has occurred
if the ASC warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
Clutch
Adjusting clutch lever
Changing the position of
the clutch-fluid reservoir
can allow air to penetrate the
clutch system.
Do not turn the handlebar fitting
on the handlebar.
Attempting to adjust the
clutch lever while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn adjusting screw 1
clockwise to increase the span
between the clutch lever and
the handlebar grip.
Turn adjusting screw 1
counter-clockwise to reduce
the span between the clutch
lever and the handlebar grip.
The adjusting screw is
easier to turn if you push
the clutch lever forward.
Brakes
Adjusting handbrake lever
Changing the position of
the brake-fluid reservoir can
allow air to penetrate the brake
system.
Do not turn the handlebar fitting
on the handlebar.
Attempting to adjust the
handbrake lever while riding
the motorcycle can lead to acci-
dents.
Do not attempt to adjust the
handbrake lever unless the mo-
torcycle is at a standstill.
4
50
z Operation