Operation Manual

Turn adjusting screw 1
clockwise to increase the span
between the brake lever and
the handlebar grip.
Turn adjusting screw 1
counter-clockwise to reduce
the span between the brake
lever and the handlebar grip.
The adjusting screw is
easier to turn if you push
the handbrake lever forward.
Mirrors
Adjusting mirrors
Turn the mirror to the correct
position.
Adjusting mirror arm
Push protective cap 1 up over
the threaded fastener on the
mirror arm.
Slacken nut 2 (left-hand
thread).
Turn the mirror arm to the ap-
propriate position.
Tighten nut to the specified
tightening torque, while holding
the mirror arm to ensure that it
does not move out of position.
Mirror on left/right ad-
apter
22 Nm
4
51
z Operation