Operation Manual

Remove screws 1 on left and
right.
Pull the front-wheel cover for-
ward to remove.
Unclip two retaining clips 1
holding the sensor cable to the
brake line.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disc on reas-
sembly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove securing screws 2 of
the left and right brake calipers.
Force the brake pads 3 slightly
apart by rocking brake caliper 4
back and forth against brake
disc 5.
Carefully pull the brake calipers
back and out until clear of the
brake discs.
8
102
z Maintenance