Operation Manual

Operating stopwatch
Call up the Info menu and
select Stopwatch.
With the stopwatch stopped,
push multi-controller 1 to the
right to start the stopwatch.
The stopwatch continues tim-
ing even if you select some
other reading or switch off the
ignition.
With the stopwatch running,
push multi-controller 1 to the
right to stop the stopwatch.
Push multi-controller 1 to the
right and hold it in this position
to reset the stopwatch.
Measuring travel times
Call up the Info menu and
select Travel times.
Push multi-controller 1 to the
right and hold it in this position
to reset the travel time.
Timing continues even if you
select some other reading or
switch off the ignition.
Time during which the mo-
torcycle was on the move
since the last reset.
Time during which the mo-
torcycle was at a standstill
since the last reset.
Odometer and
tripmeters
Selecting odometer
Switch on the ignition.
Press button 1 to select trip-
meter 2 of your choice.
The following counters can be
displayed:
Tripmeter 1 (Trip 1)
Tripmeter 2 (Trip 2)
4
51
z Operation