Operation Manual

when the ignition is switched on.
The anti-theft alarm telltale light
then signals the reason for the
alarm for one minute.
The meanings of the flash codes
are as follows:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorized key
Flashes 4x: Disconnect of the
anti-theft alarm from the mo-
torcycle's battery
Flashes 5x: Motion sensor 3
Deactivation without
remote control
with anti-theft alarm (DWA)
OE
Kill switch in operating position
(run).
Switch on the ignition.
Turn indicators flash once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Deactivation with remote
control
with anti-theft alarm (DWA)
OE
with central locking
OE
Press button 2 on the remote
control once.
See also the other func-
tions of the remote control
for the central locking system.
If you use the remote con-
trol to deactivate the alarm
function and do not follow up
by switching on the ignition, the
alarm function is automatically
reactivated after 30 seconds if
the "activation after ignition off"
parameter is set.
Turn indicators flash once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Customising anti-theft
alarm settings
with anti-theft alarm (DWA)
OE
Call up the Settings
menu and select Vehicle -
Alarm syst..
The following settings are avail-
able:
4
76
z Operation