Operation Manual

You can continue to ride. Bear
in mind that neither the ABS
function nor the integral brak-
ing function is available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
DTC self-diagnosis
with Dynamic Traction Control
(DTC)
OE
BMW Motorrad DTC performs
self-diagnosis to ensure its op-
erability. Self-diagnosis is per-
formed automatically when you
switch on the ignition.
Phase 1
Test of the diagnosis-compat-
ible system components with
the motorcycle at a standstill.
DTC warning light slow-
flashes.
Phase 2
Test of the diagnosis-compat-
ible system components while
the motorcycle is on the move.
The engine must be running
and the motorcycle must reach
a speed of at least 5 km/h in
order for DTC self-diagnosis to
complete.
DTC warning light slow-
flashes.
DTC self-diagnosis
completed
The DTC symbol no longer
shows.
If an indicator showing a DTC
fault appears after DTC self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the DTC function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Running in
The first 1000 km
While running in the motor-
cycle, vary the throttle opening
and engine-speed range fre-
quently; avoid riding at constant
engine rpm for prolonged peri-
ods.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads, avoid-
ing high-speed main roads and
highways if possible.
Comply with the rpm limits for
running in.
5
84
z Riding