Owner's Manual

Controls overview
64
Settings and information
Operating principle
Certain settings and information can only be
called up when the ignition is switched on. A
number of settings cannot be made while driv-
ing.
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 63
3 When the lights are on: instrument lighting
brightness 82
4 Calling up Check Control 67
5 Checking engine oil level
* 137
6 Initializing the Flat Tire Monitor 72
Resetting the Tire Pressure Monitor 74
7 Setting the time 67
8 Setting the date 67
9 Viewing service requirement display 65
10 Setting formats and units of measure,
resetting to factory settings 64
11 Adjusting settings
> Confirmation signals when locking and
unlocking the vehicle 20
> Response during unlocking
procedure 19
> Automatic locking 22
> Pathway lighting 79
> Daytime running lights 80
> Triple turn signal activation 51
> Seat memory
* 38
Exiting displays
The outside temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Formats and units of measure
You can set formats and units of measure.
Online Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AG