Owner's Manual for Vehicle The Ultimate Driving Machine Contents A-Z Online Edition for Part no.
Online Edition for Part no.
M6 Owner's Manual for Vehicle Congratulations, and thank you for choosing a BMW M6. Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. We therefore have this request: Please take the time to read this Owner's Manual and familiarize yourself with the information that we have compiled for you before starting off in your new vehicle.
© 2007 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. Order No. 01 41 0 013 314 US English II/07, 07 03 510 Printed in Germany Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no.
10 16 22 Cockpit iDrive Voice command system Controls 28 46 56 58 68 80 Opening and closing Adjusting Transporting children safely Driving Everything under control Technology for comfort, convenience and safety 95 Lamps 99 Climate 105 Practical interior accessories 226 Technical data 229 Short commands of voice command system 234 Everything from A to Z Driving tips 114 Things to remember when driving Navigation 122 124 136 145 Starting navigation system Destination entry Destination guidance What to
Notes Notes Using this Owner's Manual Symbols used We have made every effort to ensure that you are able to find what you need in this Owner's Manual as quickly as possible. The fastest way to find specific topics is to use the detailed index at the back of the manual. If you wish to gain an initial overview of your vehicle, you will find this in the first chapter.
BMW pursues a policy of continuous, ongoing development that is conceived to ensure that our vehicles continue to embody the highest quality and safety standards combined with advanced, state-of-the-art technology. In isolated cases it is possible that the features described in this Owner's Manual could differ from those on your vehicle. Please bear in mind that the manual may contain information on accessories and equipment that you have not specified for your own vehicle.
Notes For your own safety Maintenance and repairs Advanced technology, e.g. the use of modern materials and high-performance electronics, requires specially adapted maintenance and repair methods. Have corresponding work on your BMW performed only by your BMW center or a workshop that works according to BMW repair procedures with appropriately trained personnel. If this work is not carried out properly, there is a danger of subsequent damage and related safety hazards.
> Rust Perforation Limited Warranty > Federal Emissions System Defect Warranty > Federal Emissions Performance Warranty > California Emission Control System Limited Warranty Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.
Online Edition for Part no.
At a glance This overview of buttons, switches and displays is intended to familiarize you with your vehicle's operating environment. The section will also assist you in becoming acquainted with the control concepts and options available for operating the various systems. Online Edition for Part no.
Cockpit Cockpit Around the steering wheel: controls and displays 1 Convertible: opening and closing rear window 39 2 Convertible: opening and closing windows together 39 High beams, headlamp flasher 97 3 Convertible: opening and closing rear windows 39 Roadside parking lamps 97 4 Opening and closing front windows 38 5 Folding exterior mirrors in and out* 52 6 Adjusting exterior mirrors 52 Automatic curb monitor 52 7 Turn signals 64 Check Control 73 Computer 69 8 Shift paddles 62 10 Onlin
> Press: accepting and ending call, starting dialing* for selected phone number and redialing if no phone number is selected 19 20 > Press and hold: redialing Parking lamps 95 Low beams 95 Daytime running lamps* 96 Automatic headlamp control 95 Daytime running lamps* 96 Adaptive Head Light* 96 Volume Activating/deactivating voice command system* 22 Head-Up Display* 91 21 Instrument lighting 97 Navigation Changing radio station 152 Selecting music track 162 Scrolling in phone book and in lists wit
Cockpit Instrument cluster 1 Indicator lamps for turn signals 2 Speedometer 3 Indicator and warning lamps 13 4 Tachometer 68 5 Engine oil thermometer 69 6 Display for 7 > Sequential Manual Transmission with Drivelogic 62 > Engine oil level for manual transmission 203 > > Indicator and warning lamps 73 Check Control message present 73 > Odometer and trip odometer 68 > Computer 69 Engine oil level 203 > Speed of cruise control 67 Display for > Date and remaining distance to be driven for
The concept In urgent cases, this information will be shown as soon as the corresponding lamp lights up.
Cockpit Around the center console: controls and displays 14 Online Edition for Part no.
4 Interior lamps 97 5 Passenger airbag status lamp 90 6 Control Display 16 7 Hazard warning flashers 8 Central locking system 32 9 Automatic climate control 99 Temperature setting, left/right 99 Automatic air distribution and volume 100 15 Heated seats 51 PDC Park Distance Control* 80 Flat Tire Monitor 84 Convertible: opening the convertible top 41 Convertible: closing the convertible top 41 16 Bracket for cup holder* 108 Cooling function 101 17 Controller 16 Turn, press or move horizontally
iDrive iDrive iDrive combines the functions of a multitude of switches. This allows these functions to be operated from a central position. The following section provides an introduction to basic menu navigation. The control of individual functions is described in connection with the relevant equipment.
> BMW Assist* or TeleService* Controls Navigation or onboard information > Navigation system* > Onboard info, e.g. for displaying of the average fuel consumption Entertainment > Radio Climate > Vent settings > Automatic programs > Parked car operation To hide the message: Press the controller. This displays the start menu. The message is automatically hidden after approx. 10 seconds.
iDrive Opening menu items of start menu Displays in menu From the start menu, you can call up the four menu items Communication, Navigation, Entertainment, and Climate by moving the controller left, right, forward, or back. 1 Each menu is divided into fields. The currently selected field appears brighter. 2 A symbol indicates the last selected menu item of the start menu: You can open the menu by pressing the controller.
You can view the individual steps under Settings on Control Display, Setting time, refer to page 77.
iDrive Status information Assistance window* 1 Additional information appears in the assistance window: Display for: > Entertainment: Radio, CD > Telephone* in "Communication": Name of linked mobile phone, network search or no network > "BMW Assist"*: Existing voice connection with a service from BMW Assist 2 Entertainment sound output off 3 Station that transmits traffic information is received*: > the computer or the trip computer > the arrow or map view with navigation system* > the current pos
At a glance Switching assistance window on/off 1. Move the controller to the right to change to the assistance window and press the controller. Driving tips Controls 2. Select "Assist. window off" and press the controller. Navigation To switch on, change to the assistance window and press the controller. Switching Control Display on/ off Communications Entertainment 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3.
Voice command system Voice command system* The concept The voice command system allows you to control operation of various vehicle systems without ever removing your hands from the steering wheel. Voice commands Activating voice command system 1. Press the button. Individual menu items on the Control Display can be spoken as commands. This frees you of having to use the controller.
Press the button on the steering wheel or in the center console or {Cancel} 3. {Entertainment} The system says: {{Entertainment}} Commands Driving tips Having possible commands read aloud You can have the system read aloud the possible commands related to the selected menu item on the Control Display. To have the system list the possible commands: For example, if you have selected "CD", the system will read aloud the possible commands for operating the CD player and the CD changer*.
Voice command system Notes The mobile phone can also be operated with voice commands, refer to page 181.< For voice commands, bear the following in mind: > Say the commands and numbers smoothly and at normal volume, avoiding excessive emphasis and pauses. This also applies to spelling when entering the destination. > Always issue commands in the language of the voice command system. > When selecting a radio station, use the usual pronunciation of the station name.
25 Reference Online Edition for Part no.
Online Edition for Part no.
Controls This chapter is intended to provide you with information for complete control of your vehicle. Its extensive array of features and accessories, both for driving and for your own safety, comfort and convenience, are described here. Online Edition for Part no.
Opening and closing Opening and closing Keys/remote control 1 Remote control with integrated key 2 Spare key 3 Adapter for spare key, in glove compartment Remote control with integrated key Each remote control contains a battery which is automatically charged in the ignition lock while driving. Drive a longer distance with each remote control at least twice a year to keep the battery charged. For comfort access*, the remote control contains a replaceable battery, refer to page 38.
> Brightness of the Control Display, refer to page 78 At a glance > Settings for the display on the Control Display: > Language on the Control Display, refer to page 79 This means that you will always find your BMW set to your own personal settings even if another person with his/her own remote control and settings has used the vehicle since the last time you drove it. The individual settings are stored for a maximum of four remote controls.
Opening and closing Central locking system The concept The central locking system is ready for operation whenever the driver's door is closed. The system either locks or unlocks all of the following: > Doors > Compartment in the front center console Opening and closing: from outside Using remote control Persons or animals left unattended in a parked vehicle can lock the doors from the inside.
Press the button for approx. 1 second. The luggage compartment lid opens, regardless of whether it was previously locked or unlocked. A previously locked luggage compartment lid is also locked again after closing. Coupe: during opening, the luggage compartment lid pivots back and up. Make sure there is sufficient clearance.< At a glance Opening luggage compartment lid Controls > "Driver's door only"* Press the button once to unlock only the driver's door and the fuel filler door.
Opening and closing If it is no longer possible to lock the vehicle using the remote control, then the battery is discharged. Use this remote control during an extended drive; this will recharge the battery, refer to page 28. For US owners only The transmitter and receiver units comply with part 15 of the FCC/Federal Communication Commission regulations. Operation is governed by the following: FCC ID: LX8766S LX8766E LX8CAS LX8CAS2 Compliance statement: This device complies with part 15 of the FCC Rules.
2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Door locks" is selected and press the controller. 6. Select "Central locking" and press the controller. Locking doors At a glance 1. Press the button. This opens the start menu. > Use the central locking button to lock both of the doors simultaneously, or > press down the lock button of a door.
Opening and closing Unlocking manually Opening from outside In order to manually unlock the compartment in the front center console in the event of an electrical malfunction, turn the key all the way to the right until it reaches the stop. If unlocking was manual, return the lock to the home position, i.e. all the way back to the left, before reactivating the hotel function.< Doors Automatic soft closing* To close the doors, merely press it closed gently.
Convertible: increasing luggage compartment capacity Alarm system The concept Pull the lever in the luggage compartment. The luggage compartment lid is unlocked. Luggage compartment There are four lashing eyes on the inner corners of the luggage compartment for securing luggage nets* or securing straps to fix luggage in position. Also refer to Securing cargo, page 118.
Opening and closing Arming and disarming alarm system When you lock or unlock the vehicle, either with the remote control or at the door lock, the alarm system is armed or disarmed at the same time. You can open the luggage compartment lid, even with the system armed, by using the button of the remote control, refer to page 31. When the luggage compartment lid is closed, it is once again locked and monitored.
> Comfort closing with Coupe > Opening luggage compartment lid separately > Starting engine Functional requirement > The vehicle or the luggage compartment lid can only be locked if the vehicle detects that the remote control you are carrying is outside the vehicle. > The next unlocking and locking cycle is not possible until after approx. 2 seconds. > The engine can only be started if the vehicle detects that the remote control is located in the vehicle.
Opening and closing Opening luggage compartment lid separately Press the upper half of the BMW emblem. This corresponds to pressing the button. If a remote control accidentally left in the luggage compartment is detected inside the locked vehicle after the luggage compartment lid has been closed, then the luggage compartment lid opens again. The hazard warning flashers flash and a signal* sounds.
At a glance > Press the switch beyond the resistance point: The window opens automatically. Pressing the switch again stops the opening movement. Together > Down to the resistance point: All windows, including the rear window, continue to open as long as you press the switch. You can close the windows in the same manner by pulling the switch. > Press the switch beyond the resistance point: All windows open automatically. Pressing the switch again stops the opening movement.
Opening and closing You can close the rear window in the same manner by pulling the switch. > Press the switch beyond the resistance point: The rear window opens automatically. Pressing the switch again stops the opening movement. Briefly press button 1 again to deactivate the function. The LEDs go out. The rear window opens and closes automatically when you open or close the convertible top.
> Ensure that the convertible top compartment floor in the luggage compartment is folded down, refer to page 35, as otherwise the convertible top cannot be opened. > Make sure that the luggage compartment lid is closed. Opening and closing For information on top operation with comfort access, also refer to page 37. From radio readiness, refer to page 58, with the vehicle stationary: To avoid putting excessive strain on the battery, only move the convertible top when the engine is running if possible.
Opening and closing If the opening or closing action is interrupted for a longer period, the convertible top remains in that position for approx. 15 minutes before it slowly moves to a stable position. 4. Close luggage compartment lid. A convertible top which is not completely opened or closed presents a danger. Do not interrupt and continue the closing action several times in succession; otherwise, the top mechanism can be damaged.< 5. Completely open the side windows and the rear window.
At a glance 4. Raise the two convertible top ends as far as possible, arrow 5, and close the convertible top compartment lid, arrow 6. 3. Together with the other person, pull the two sides of the convertible top out simultaneously and pivot forward. When doing so, keep the convertible top compartment lid open, arrow 4, e.g. with your shoulder. 8. From the outside, both persons pull the front frame of the convertible top downward, as simultaneously as possible on the two sides. 9.
Opening and closing Wind deflector* Installing The wind deflector keeps the air movement in the passenger compartment to a minimum when the convertible top is open, thus enabling pleasant driving even at higher speeds. 1. Insert the securing pin 1 of the wind deflector into the appropriate opening on the right side of the vehicle. The wind deflector is stowed in a protective sleeve in the luggage compartment. Short instructions for use are also provided on the protective sleeve. Before installing 1.
At a glance Controls Folding up Driving tips 1. Push the handle of the securing pin on the wind deflector on the left side of the vehicle all the way back and release the locking mechanism. 45 Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG Reference Mobility Communications Entertainment Navigation 2. Fold in the upper and lower section.
Adjusting Adjusting Sitting safely The ideal sitting position can make a vital contribution to relaxed, fatigue-free driving. In the interaction with the safety belts, the head restraints and the airbags, the seat position plays an important role in an accident. To ensure that the safety systems operate with optimal efficiency, we strongly urge you to follow the instructions contained in the following section. For additional information on Transporting children safely, refer to page 56.
At a glance Seats To ensure that the safety systems continue to provide optimized protection, please follow the adjustment instructions on page 46.< 1 Inclination 2 Longitudinal direction 3 Height 4 Backrest 5 Convertible: head restraints, refer to page 50 Lumbar support You can also adjust the contours of the backrest to obtain additional support in the lumbar region. The upper hips and spinal column receive supplementary support to help you maintain a relaxed, upright sitting position.
Adjusting Seat, mirror and steering wheel memory The adjusting procedure for the steering wheel is interrupted if you briefly press the switch for the steering wheel adjustment in any direction, refer to page 53. Safety feature 1. Close the driver's door and switch ignition on or off, refer to page 58. 2. Press the desired memory button 1, 2 or 3 and maintain pressure until the adjustment process has been completed.
At a glance Coupe > To raise: pull the head restraint upward. 8. Select "After unlocking" or "After door opened". > To lower: slide the head restraint downward. To reach the lowest position, press the button, refer to arrow 1.< Adjusting tilt angle Swivel the head restraints. Removing 1. Pull the head restraint upward to the stop. Front head restraints A correctly adjusted head restraint reduces the risk of injury to cervical vertebrae in an accident.
Adjusting Convertible Coupe: releasing backrest Adjusting height > To raise: move the switch upward. > To lower: move the switch downward. Adjusting tilt angle Swivel the head restraints. Entering rear Before starting to drive, fold backrests back, otherwise there is the danger of accident due to an unexpected movement of the seat.< Pull the lever upward and fold the backrest forward. The lever is designed so that the safety belt can be hooked onto it.
To ensure that the safety systems continue to provide optimized protection, please follow the adjustment instructions on page 46.< Before every drive, make sure that safety belts are being worn at all of the occupied seats. Airbags complement the safety belt as an additional safety device, but they do not represent a substitute. The indicator lamp lights up and a signal sounds. At the same time, an additional message appears on the Control Display.
Adjusting Mirrors Tilting down passenger-side mirror – automatic curb monitor Exterior mirrors The mirror on the passenger's side is more curved than the driver's mirror. Objects reflected in the mirror are closer than they appear. Do not estimate the distance of following traffic based on what you see in the mirrors; otherwise, there is an increased accident risk.< 1 Adjusting 2 Switching to the other mirror or to the automatic curb monitor 3 Folding mirrors in and out* Activating 1.
Steering wheel iDrive, for explanation of principle, refer to page 16. 1. Press the button. This opens the start menu. At a glance Also do not attach stickers to the windshield in front of the mirror. 2. Press the controller to open the menu. Adjusting 3. Turn the controller until "Settings" is selected and press the controller. Driving tips Controls Do not adjust the steering wheel while the vehicle is moving. There is a risk of accident as the result of unexpected movement.
Adjusting 5. Select the desired function unit and press the controller. 3. Select "MDrive" and press the controller. Operating function Press the button on the steering wheel. If you have programmed "Navigation voice instructions" for the button: > To switch voice instructions on/off: Press the button longer. > To repeat the last voice instruction: Press the button.
At a glance Controls 6. Turn the controller to select the desired setting. Driving tips "Unchanged" retains the current setting made outside of MDrive. 7. Press the controller. The setting is stored for the remote control currently in use. Activating settings Navigation button on the steering wheel. The indicator lamp in the instrument cluster lights up. The settings made on the Control Display for the functions contained in MDrive are active.
Transporting children safely Transporting children safely The right place for children Do not leave children unattended in the vehicle; otherwise, they could endanger themselves and other persons, e.g. by opening the doors.< Children always in the rear Accident research shows that the safest place for children is in the back.
LATCH: Lower Anchor and Tethers for CHildren. 2. Remove the child restraint system. 3. Allow the belt webbing to be pulled in completely. Coupe: child restraint system with tether strap Rear seats Before attaching the LATCH child's seat, pull the belt away from the region of the child restraint fixing system. The mounting points for the LATCH anchors are located at the positions indicated by arrows in the gap between the seat and the backrest.
Driving Driving Ignition lock Start/Stop button Inserting remote control into ignition lock Pressing the Start/Stop button switches the radio readiness or the ignition on and off. Insert the remote control as far as possible into the ignition lock. Radio readiness switches on. Some electronic systems/consumers are ready for operation. Comfort access* With comfort access, only insert the remote control into the ignition lock in exceptional cases, refer to page 37.
Do not allow the engine to warm up by leaving it running while the vehicle remains stationary. Instead, drive off at a moderate engine speed. Avoid frequent starting in quick succession or repeated starting attempts in which the engine does not start. Otherwise, the fuel is not burned at all or is burned inadequately and there is a danger of overheating and damage to the catalytic converter.< 3. Press the Start/Stop button.
Driving Handbrake Manual transmission* The handbrake is primarily intended to prevent the vehicle from rolling while parked; it brakes the rear wheels. Indicator lamp The indicator lamp lights up, and a signal also sounds when starting off. The handbrake is applied. Indicator lamp for Canadian models. When shifting into 5th/6th gear, press the gearshift lever toward the right, otherwise an inadvertent shift into 3rd or 4th gear could lead to engine damage.
It offers the following functions: > Choice of manual or automatic mode: Sequential mode or Drive mode > Selection option between different driving programs, Drivelogic, refer to page 62 > Upshift display, shift lights, refer to page 63 > Automatic downshifting and prevention of incorrect shifting even in sequential operation > Automatic double clutching Selector lever positions N is automatically engaged after just a few seconds when you open the driver's door or the hood with the engine running and do n
Driving D Drive mode Using shift paddles on steering wheel In the Drive mode, all forward gears are shifted automatically. Shifting from Sequential mode to Drive mode: press selector lever to the right toward D/S. To switch back into the Sequential mode: press the selector lever to the right again toward D/S or shift using the shift paddles or the selector lever. Kick-down: for rapid acceleration, e.g. passing, press the accelerator pedal as far down as it will go. You achieve maximum acceleration.
6. Press the controller to select driving programs. 7. Turn the controller to set the driving program. At a glance Selecting driving program with button in center console 8. Press the controller. Navigation You can also activate your preferred driving program with the button on the steering wheel, refer to MDrive on page 54. With the ignition switched on you can change the settings of MDrive on the Control Display. iDrive, for explanation of principle, refer to page 16. 1. Open the start menu. 2.
Driving M Engine Dynamic Control With M Engine Dynamic Control you can influence how sporty the reaction of your vehicle to accelerator pedal movements is to be. Three programs are available for engine control. For the programs "P 500" and "P 500 Sport" the LED in the POWER button lights up. Turn signals/ headlamp flasher "P 400" program In the "P 400" program the engine reacts gently to the movement of the accelerator pedal. This is, for example, ideal for city driving or driving on snow.
Fast wiper speed Briefly press twice or press beyond the resistance point. The system reverts to operation at normal speed whenever the vehicle is stationary. At a glance 5. Change to upper field if necessary. Turn the controller until "Lighting" is selected and press the controller. Wiper operation is controlled automatically as a function of the rain intensity. The rain sensor is located on the windshield, directly in front of the interior rearview mirror. Wiper system Press the button, arrow 3.
Driving Do not use the washers if there is any danger that the fluid will freeze on the windshield. If you do so, your vision could be obscured. To avoid freezing, use a washer fluid antifreeze, refer to Washer fluid. Do not use washers when the washer fluid reservoir is empty, as this will damage the washer pump.< Windshield washer nozzles Both windshield washer nozzles are automatically heated with the engine running or the ignition switched on. Washer fluid Washer fluid antifreeze is flammable.
Displays in instrument cluster Press the lever beyond the resistance point: Increase speed each time to the next fives place on the mph speedometer or to the next tens place on the km/h speedometer. 1 Stored speed 2 Selected speed is displayed briefly Driving tips Maintaining speed, storing speed, and decelerating Controls If, on a downhill grade, the engine's braking effect is not sufficient, the controlled speed can be exceeded. Speed can drop on uphill grades if the engine output is insufficient.
Everything under control Everything under control Odometer, outside temperature display, clock 1 Time, outside temperature, refer to Computer on page 69 2 Odometer and trip odometer 3 Press button: Tachometer > with ignition switched on, trip odometer is reset > with ignition switched off, odometer is briefly displayed The advance warning field, arrow 1, and the red warning field, arrow 2, change depending on the engine temperature.
Computer The general operating temperature lies between 1757/80 6 and 2507/1206. Do not exceed a value of approx. 2657/130 6. If the engine oil temperature is too high, the permissible engine speed, and with it the available engine output is reduced. To display the information, press the BC button in the turn signal lever.
Everything under control Cruising range Displays the estimated cruising range available with the remaining fuel. The range is projected based on the driving style over the last 20 miles/ 30 km. 4. Select "Onboard info" and press the controller. Refuel as soon as possible once your cruising range falls below 30 miles/ 50 km, otherwise engine functions are not ensured and damage can occur.< Average fuel consumption The average fuel consumption is calculated for the time during which the engine is running.
1. Move the controller to the right to change to the assistance window and press the controller. At a glance 2. Turn the controller to select the distance to your destination. If necessary, hold it against a slight resistance to enter a greater difference. 3. Press the controller to apply the setting. Controls The distance is automatically predetermined during the destination guidance of the navigation system*. Trip computer The trip computer is suitable for a vacation trip, for example. 3.
Everything under control Your BMW Service Advisor can determine your vehicle's current service requirements by reading out the data stored in the remote control.< Select the entry and press the controller. Additional information You can view more detailed information by using the Control Display, for explanation of principle, refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Info sources" and press the controller. 4. Select "Service" and press the controller.
10. Press the controller to apply the setting. The year is selected. 11. Turn the controller to make the adjustment. 12. Press the controller to apply the setting. The date entry is stored. To exit from the menu: Select the arrow and press the controller. This symbol means that a Check Control message has been generated. The symbol remains visible even if the Check Control message has been hidden after a short time.
Everything under control Displaying stored Check Control messages 1. Press the button longer: The first stored message is displayed. You can display supplementary information regarding most Check Control messages, e.g. as to the cause of a malfunction and corresponding actions to be taken, see below. In urgent cases, this information will be shown as soon as the corresponding lamp lights up. To exit the displayed information: Select the arrow and press the controller. Hiding Check Control messages 2.
Before the display disappears, you can display the messages once again. Press the CHECK button for approx. 2 seconds. If several messages are present, you can press the CHECK button repeatedly. 6. Select a message and press the controller. The display: At a glance Malfunction reports generated during the trip are shown consecutively when you switch off the ignition.
Everything under control 5. Select the speed value and press the controller. > Select "Stop" and press the controller. This stops the timer. 6. Turn the controller to set the limit. If necessary, hold it against a slight resistance to enter a greater difference. Taking an intermediate time reading 7. Press the controller to apply the setting. The limit is automatically switched on. Applying your current speed as limit Select "Select current speed" and press the controller.
Making settings 2. Move the controller once to the front if necessary to change to the first field from the top. 1. Turn the controller to set the hours and press the controller. 2. Turn the controller to set the minutes and press the controller. Driving tips Controls 1. Turn the controller until "Time / Date" is selected and press the controller. 4. Turn the controller until "Set time" is selected and press the controller.
Everything under control Setting date 1. Select "Date" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Brightness" is selected and press the controller. 2. Select "Set date" and press the controller. The first section of the date display is selected, in this case the month. 6. If necessary, move the controller to the right to select "Display". 3. Turn the controller to make the adjustment. 7. Turn the controller until the desired setting is selected. 4.
At a glance 7. Press the controller. 8. Select the desired unit of measure and press the controller. The settings are stored for the remote control currently in use. Controls Language on Control Display iDrive, for explanation of principle, refer to page 16. 1. Press the button. This opens the start menu. Driving tips 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Language / Units" and press the controller.
Technology for comfort, convenience and safety Technology for comfort, convenience and safety PDC Park Distance Control* Switching off manually Press the button again; the LED goes out. The concept The PDC assists you when you are parking. Acoustic signals and an optical display* alert you to the approach of an object from behind your vehicle. To measure the distance, there are four ultrasonic sensors in each bumper. The range of these sensors is approx. 7 ft/2 m.
2. Press the controller to open the menu. 3. Turn the controller until "Settings" is selected and press the controller. 4. Turn the controller until "Vehicle / Tires" is selected and press the controller. 5. Change to upper field if necessary. Turn the controller until "PDC" is selected and press the controller. Driving stability control systems Your BMW is equipped with an extended array of systems designed to enhance and maintain vehicle stability under extreme conditions.
Technology for comfort, convenience and safety Brake assistant When you apply the brakes rapidly, this system automatically produces the maximum braking force boost and thus helps to achieve the shortest possible braking distance during full braking. This system exploits all of the benefits provided by ABS. Do not reduce the pressure on the brake pedal for the duration of the full braking. DSC Dynamic Stability Control DSC optimizes the vehicle stability and traction.
You can also activate and deactivate DSC with the button on the steering wheel, refer to MDrive on page 54. Malfunction in driving stability control systems You can also activate and deactivate the M Dynamic Mode with the MDM button. Deactivating MDM again Press the button on the steering wheel or the MDM button* again; the MDM indicator lamp goes out.
Technology for comfort, convenience and safety The vehicle remains operational. Have the system checked as soon as possible. The brake system warning lamp lights up yellow. A message appears on the Control Display. The brake assistant is defective. Have the system checked as soon as possible. Selecting program Sequential Manual Transmission with Drivelogic: Display of the previously described malfunction on Canadian models.
At a glance change. This change is detected and signaled as a flat tire. Functional requirement The Flat Tire Monitor cannot indicate sudden severe tire damage caused by outside factors and does not detect a natural, even pressure drop in all four tires.< In the following situations, the system could be delayed or malfunction: Via iDrive, for explanation of principle, refer to page 16: 1. Press the button. This opens the start menu. 2. Press the controller to open the menu.
Technology for comfort, convenience and safety 8. Select "Yes" and press the controller. Functional requirement In order to assure the reliable reporting of a flat tire, the system must have been reset with the correct tire inflation pressure. Always use wheels with TPM electronics, otherwise fault-free operation of the system is not ensured. Reset the system again after each correction of the tire inflation pressure and after every tire or wheel change.
7. Select "Reset" and press the controller. Flat tire or a major drop in inflation pressure in several tires. A message appears on the Control Display. 8. Select "Yes" and press the controller. At a glance All wheels are yellow Gray Resetting system Reset the system again after each correction of the tire inflation pressure and after every tire or wheel change.< Resetting finishes during driving, which can be interrupted at any time. When driving resumes, resetting is continued automatically.
Technology for comfort, convenience and safety Have the tire replaced by a BMW center or a workshop informed on handling TPM which works according to BMW repair procedures with correspondingly trained personnel. Malfunction The yellow warning lamp flashes and then lights up continuously. The tires are shown in gray on the Control Display and a message is displayed. No flat tire can be detected.
At a glance 3 Side airbags 4 Knee airbag 5 Knee airbag Protective action To ensure that the safety systems continue to provide optimized protection, please follow the adjustment instructions on page 46.< The front airbags help protect the driver and front passenger by responding to frontal impacts in which safety belts alone cannot provide adequate restraint. When needed, the head and side airbags help provide protection in the event of a side impact.
Technology for comfort, convenience and safety The front, knee and side airbags on the front passenger side can be deactivated for teenagers and adults in certain sitting positions; the indicator lamp for the front passenger airbags lights up when this occurs. In these cases, change the sitting position so that the front passenger airbags are activated and the indicator lamp goes out.
Lowering If the rollover protection system experienced no impact after automatic activation, then it can be lowered again. No tools are necessary for this purpose. 1. Press the release backward and hold in that position. Never move the convertible top when the rollover protection system is raised. No changes of any nature may be made to the individual components of the rollover protection system and wiring. Work on the rollover protection system may only be performed at a BMW center.
Technology for comfort, convenience and safety 7. Select desired information of Head-Up Display. 8. Press the controller. The information is shown on the HeadUp Display. "M View": the M view is shown in the Head-Up Display. Information unavailable in the M view appears on the Control Display in gray and cannot be selected. "M View": the default view is displayed. Switching on/off Press the button. Selecting displays iDrive, for explanation of principle, refer to page 16. 1. Press the button.
1 Current engine speed, highlighted 2 Advance warning field of tachometer 3 Red warning field of tachometer, also refer to Tachometer on page 68 7. Turn the controller until the desired setting is selected. 4 Speed 5 Gear display The setting is stored for the remote control currently in use.
Technology for comfort, convenience and safety Only clean the cover of the Head-Up Display with a soft, lint-free cloth or with a display cleaning cloth, otherwise damage may result.< 94 Online Edition for Part no.
A blue sky with the sun low on the horizon can cause the lights to be switched on. Lights off and daytime running lamps* 1 Parking lamps and daytime running lamps* 2 Low beams 3 Automatic headlamp control, daytime running lamps* and Adaptive Head Light* Parking lamps In switch position 1, the front, rear and side vehicle lighting is switched on. You can use the parking lamps for parking. If desired, the light switch can be left in position 3.
Lamps 5. Change to upper field if necessary. Turn the controller until "Lighting" is selected and press the controller. 5. Change to upper field if necessary. Turn the controller until "Lighting" is selected and press the controller. 6. Select "Pathway lighting" and press the controller. 6. Select "Daytime running lamps" and press the controller. 7. Turn the controller to select the desired duration. 8. Press the controller to apply the setting.
At a glance Instrument lighting High beams 2 Headlamp flasher 3 Roadside parking lamps Roadside parking lamps, left or right* Interior lamps Navigation You also enjoy the option of lighting up just one side of your vehicle when parking: Switching on After parking the vehicle, press the lever up or down beyond the resistance point, arrow 3. The roadside parking lamps drain the battery.
Lamps Reading lamps The reading lamps are beside the interior lamp: You can turn them on and off using buttons 2 located next to the lamps. 98 Online Edition for Part no.
At a glance Climate Air directed toward the windshield and side windows 9 2 Air for the upper body area, refer to Ventilation on page 102 10 Temperature, right side of passenger compartment 3 Air to footwell 11 Residual heat mode 4 Temperature, left side of passenger compartment 12 AUTO program 5 Maximum cooling 6 Defrosting windows and removing condensation 14 LED for parked car ventilation 7 Air volume, manual 8 Switching off automatic climate control 16 Air grill for interior temper
Climate The current setting for air distribution is displayed on the Control Display. A congenial climate The AUTO program offers the optimum air distribution and air volume for virtually all conditions, refer to AUTO program below. Now you only need to select an interior temperature that you find pleasant. The following sections contain more detailed information on the available setting options.
5. Select the desired field by moving the controller. Defrosting windows and removing condensation Quickly remove ice and condensation from the windshield and front side windows. To do this, also switch on the cooling function. Rear window defroster The rear window defroster switches off automatically after a certain amount of time. Convertible: the rear window defroster is only activated when the rear window is closed.
Climate compartment can only be cooled with the engine running. Residual heat The heat stored in the engine is used to heat the passenger compartment, e.g. while stopped at a school to pick up a child. Maximum cooling Maximally cooled air is obtained as quickly as possible from an outside temperature above approx. 327/ 0 6 and with the engine running. The automatic climate control changes over to the lowest temperature and switches into the recirculated-air mode.
Switching on and off directly Adjust the vent outlets to direct the flow of cool air in your direction, for instance, if the interior has become too warm, etc. iDrive, for explanation of principle, refer to page 16. 5. Select "Parked car ventilation" and press the controller. Parked car ventilation The concept The parked car ventilation is switched on. The parked car ventilation blows air into the passenger compartment to lower interior temperatures.
Climate 6. Select the time and press the controller. The first time setting is selected. 7. Turn the controller to make the adjustment. 8. Press the controller to apply the setting. The next adjustment is selected. 9. Make the remaining adjustments. After the last adjustment, the time is stored. Activating timer Move the controller to the left or right to select "Timer 1" or "Timer 2" and then press the controller. The switch-on time is activated.
At a glance Practical interior accessories Programming To prevent possible damage or injury, before programming or using the integrated universal remote control, always inspect the immediate area to make certain that no people, animals or objects are within the travel range of the device. Also, comply with the safety precautions of the original hand-held transmitter.
Practical interior accessories If the device fails to function even after repeated programming, check whether the original hand-held transmitter uses an alternating-code system. To do so, either read the instructions for the original hand-held transmitter or hold down the programmed memory button 1 of the integrated universal remote control. If the LED 2 on the integrated universal remote control flashes rapidly for a short time and then remains lit for approx.
Adjusting height The center armrest can be set in two positions. At a glance Be sure that the flashlight is switched off when it is inserted into its socket. Failure to comply with this precaution could lead to overcharging and damage.< To open the cover: Pull the left button. The cover opens and can be folded upward. Depending on the version, the storage compartment can be equipped with a corresponding cradle* for the telephone or mobile phone.
Practical interior accessories Another storage space is located in the luggage compartment in the right side panel. If you wish, this is also suitable to store the onboard documentation. Coupe: clothes hooks The removable cup holder can be inserted into the side of the center console. Ashtray To fold down, press at the top edge. Opening When hanging clothing on the hooks, ensure that it will not obstruct the driver's vision. Do not hang heavy objects on the hooks.
Loading 1. Press the button downward and pull the filler element forward. In front passenger footwell 2. Extend the ski bag between the front seats. The zipper gives you easy access to stowed items and facilitates drying of the ski bag. 3. Press the button in the luggage compartment. Access to the socket: Fold open the cover. 4. Open the loading flap and use the magnetic holder to secure it to the rear panel. To stow the ski bag, perform the above steps in reverse order.
Practical interior accessories Securing cargo After loading, secure the ski bag and its contents. To do so, tighten the retaining belt at the buckle. Secure the ski bag in this way. If you fail to do so, it could move around and endanger occupants during braking or evasive maneuvers. To refit the filler element, insert the two tabs at the bottom into the strip and press the filler element back into place. Make sure that you do not damage the rear seat upholstery.< 110 Online Edition for Part no.
111 Reference Online Edition for Part no.
Online Edition for Part no.
Driving tips This section is designed to provide you with extra support by supplying information useful in dealing with specific driving and operating conditions. Online Edition for Part no.
Things to remember when driving Things to remember when driving Breaking-in Moving parts need time to adjust to one another. To ensure that your vehicle continues to provide optimized economy of operation throughout an extended service life, we request that you devote careful attention to the following section. Do not use the driving programs 5 and 6, refer to Drivelogic on page 62, during break-in. Brake system Brakes require an initial break-in period of approx.
Hydroplaning When driving on wet or slushy roads, reduce road speed. If you do not, a wedge of water can form between tires and road surface. This phenomenon is referred to as hydroplaning, and is characterized by a partial or complete loss of contact between the tires and the road surface, ultimately undermining your ability to steer and brake the vehicle.< The risk of hydroplaning increases as the tread depth of the tires decreases, also refer to Minimum tire tread on page 199.
Things to remember when driving Braking safely Your BMW is equipped with ABS as a standard feature. In situations that require it, it is best to brake with full force. Since the vehicle maintains steering responsiveness, you can still avoid possible obstacles with a minimum of steering effort. The pulsing of he brake pedal indicates that the ABS is controlling braking.
Load At a glance To avoid loading the tires beyond their approved carrying capacity, never overload the vehicle. Overloading can lead to overheating and increases the rate at which damage develops inside the tires. The ultimate result can assume the form of a sudden blow-out.< 6. If your vehicle will be towing a trailer, part of the load from your trailer will be transferred to your vehicle.
Things to remember when driving Securing cargo > Use the luggage net* or securing straps to hold down small and lightweight luggage and cargo. > Heavy-duty cargo straps* for securing larger and heavier objects are available at your BMW center. Four lashing eyes mounted in the luggage compartment are used to secure these heavy-duty cargo straps, refer to arrows. > Please observe the special instructions supplied with the heavy-duty cargo straps.
119 Reference Online Edition for Part no.
Online Edition for Part no.
Navigation This chapter describes how you can enter destinations and specify your route so that your navigation system guides you reliably to your destination. Online Edition for Part no.
Starting navigation system Starting navigation system* Your navigation system can use satellites to ascertain the precise position of your vehicle and guide you reliably to any destination you enter. Navigation DVD The navigation system requires a special navigation DVD. The latest version is available at your BMW center. Display in the assistance window You can display the route or the current position in the assistance window. This display remains visible even if you change to another application. 1.
At a glance 4. Turn the controller until "Language / Units" is selected and press the controller. 5. Change to upper field if necessary. Turn the controller until "Languages" is selected and press the controller. Driving tips Controls 6. Select "Arrow display pop-up instructions" and press the controller. 123 Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG Reference Mobility Communications Entertainment Navigation The arrow display is shown.
Destination entry Destination entry In entering your destination you can select from among the following options: > Entering a destination manually, see below > Entering destination via voice*, refer to page 127 > Selecting destination using information, refer to page 130 > Selecting destination from a list, refer to Destination list, page 131 > Selecting destination from address book, refer to page 132 > Selecting home address, refer to page 134 After selecting your destination you can proceed to start th
1. Select "State / Province" or the displayed country and press the controller. 4. Enter additional letters if necessary. The list gradually grows smaller each time you enter a new letter. A list of available countries appears on the display. Navigation Entering town/city of destination via name 1. Select "Town / City" or the displayed town/ city and press the controller. 2. Select the first letter and press the controller.
Destination entry > Enter a blank space: Select the symbol and press the controller. > Delete individual digits or letters: Move the controller toward the right to select and press the controller. > Delete all digits or letters: Move the controller toward the right to select and press the controller longer. 3. Select the zip code and press the controller. The corresponding town/city of destination is displayed. 4. Change into the third field from the top.
Starting destination guidance with manual destination entry Selecting country 1. Wait for the system to ask for the country of destination. 2. Say the name of the country of destination. Say the name of the country of destination in the language of the voice command system. Entering town/city of destination > If destination guidance is not to be started immediately: Select "Add to destination list" and press the controller. The destination is stored in the destination list, refer to page 131.
Destination entry Up to 6 entries are displayed at once on the Control Display. A destination is suggested by the system. 3. Select a town/city: A destination is suggested by the system. > Select highlighted town/city: {Yes} 2. Select a town/city: > Select other town/city: {No} > Select highlighted town/city: {Yes} > Select entry, e.g. {Entry 3} > Select other town/city: {No} > Reenter the town/city: {Repeat} > Select entry, e.g.
At a glance The destination is added to the destination list or can be saved in the address book. {Add to destination list} or {Add to address book} 2. Press the controller. > Moving map: move the controller in the corresponding direction. The controller can be moved to the left, right, forward and back. 5. Press the controller to accept or store the destination in the destination guidance system. The selected town/city of destination and other menu items are displayed. 6.
Destination entry Selecting destination using information You can obtain a display of selected destinations, e.g. hotels, sights or hospitals, and adopt them into the destination guidance. 7. Select "" and press the controller. These destinations are displayed on the Control Display. 1. Select "Navigation" and press the controller. 2. Select "Information" and press the controller. 8. Select a destination and press the controller.
To hide the symbols in the map view: 1. Select the symbol and press the controller. At a glance This symbol indicates the current destination during destination guide. To display other destinations in the destination list: turn the controller. Adopting the destination into the destination guidance system 1. Select the desired destination from the destination list and press the controller. 2. Select "Start guidance" and press the controller. 2. Select "Hide map icons" and press the controller.
Destination entry Address book Storing current position* Opening address book The current position can be adopted into the address book. iDrive, for explanation of principle, refer to page 16. 1. Select "Address book" and press the controller. 2. Change into the third field from the top. Turn the controller until "New address" is selected and press the controller. Select "Address book" and press the controller. Storing destinations in address book You can store approx.
To start destination guidance: Select "Start guidance" and press the controller. Deleting individual destinations from address book 1. Select "Address book" and press the controller. At a glance 2. Select the entry and press the controller. Driving tips 3. Select "Delete address" and press the controller. Changing destinations from address book 2. Select the entry and press the controller. 3. Select "Edit address" and press the controller. 4. Select "Yes" and press the controller.
Destination entry Storing home address You can store your current position or the current destination as a home address in the address book. This entry is in the second position in the address book. 1. Select "Address book" and press the controller. 2. Change into the third field from the top. Turn the controller until "Home address" is selected and press the controller. Selecting route You can influence the calculated route by choosing certain route criteria.
The route criterion is selected. 5. If necessary, select an additional route criterion and then press the controller: > "Dynamic route"* Automatic changing of the route in case of traffic obstructions. Depending on the type of road as well as the type and length of traffic obstruction, the route can also be calculated in a way that passes through the traffic obstruction. > "Avoid tollroads" Tollroads are avoided where possible. > "Avoid ferries" Ferries are avoided where possible.
Destination guidance Destination guidance Starting destination guidance 1. Change to upper field if necessary. Turn the controller until "Navigation" is selected and press the controller. 2. Select a destination from the destination list and press the controller or enter a new destination, refer to page 124. During destination guidance, you can operate other equipment via iDrive at any time.
Manually displaying traffic information* 3 Selecting route criteria 4 Starting/stopping destination guidance The destination guidance starts automatically after a short time. 5 Arrow to destination as the crow flies 6 Distance to the next change of direction To start destination guidance immediately: Select "Yes" and press the controller. 7 Current position 8 Direction of travel Displaying route You have the option of displaying various views of the route during destination guidance.
Destination guidance 1 Street name for change of direction 1 Switching voice instructions on/off 2 Distance to change of direction 2 Starting/stopping destination guidance 3 Change of direction 3 Selecting destination using map 4 Displaying the menu in which the information last selected can be displayed/hidden, refer to Selecting destination via information on page 130 5 Changing map view To exit from the menu: Select the arrow and press the controller.
You can have the roads and towns along the route displayed during destination guidance. 1. Press the button. This opens the start menu. The distances remaining to be traveled on each individual road are also displayed. 2. Press the controller to open the menu. 1. Select "Navigation" and press the controller. 3. Turn the controller until "Settings" is selected and press the controller. Driving tips 2. Change into the third field from the top.
Destination guidance Repeating and canceling voice instructions With the programmable button on the steering wheel you can also make the following settings, refer to page 53: > Repeat the voice instruction: Press the button. > Switch voice instructions on/off: Press button longer. Setting volume of voice instructions The volume can only be adjusted during a voice instruction.
"AUTO": automatic selection of the Traffic Info station with the strongest reception. 1. Press the button. This opens the start menu. Depending on the station, either the station name, frequency, local number or other information is displayed.< Manually displaying traffic information During destination guidance Traffic information can be displayed manually during destination guidance in the arrow or map view.
Destination guidance With destination guidance switched off 1. Open the start menu. Depiction of traffic information in map view 2. Move the controller to the right to call up "Navigation". The traffic information symbols are shown in the map view up to a scale of 100 miles/200 km. 3. Select "Traffic Info" and press the controller. Traffic event with map scales greater than 5 miles/10 km, arrow points in the direction of travel concerned Several traffic events have been received.
Traffic light failure Roadwork If a traffic obstruction is reported to the navigation system and "Dynamic route" is not selected, you will be provided with certain information from a distance of approx. 25 miles/ 40 km, e.g. the length of the traffic congestion. The last possible junction will be displayed shortly before this.
Destination guidance Displaying current position You can also display your current position with the destination guidance switched off. 1. Select "Navigation" and press the controller. 2. Change into the fourth field from the top. Turn the controller until "Current position" is selected and press the controller. The current position of your BMW is displayed. If the navigation system is unable to identify a town or city, your current map coordinates will appear.
> the navigation system does not react to entries? If the battery has just been reconnected after having been disconnected, it then takes up to 10 minutes before the system is once again operational. At a glance Communications Entertainment > the destination guidance does not accept a destination? The data of the destination is not stored on the navigation DVD that is loaded. Select a destination that is as close as possible to the original.
Online Edition for Part no.
Entertainment This chapter describes the operation of the radio and CD player as well as their tone settings. Online Edition for Part no.
On/off and tone On/off and tone The following audio sources have shared controls and setting options: 1 Entertainment sound output on/off, volume > Professional* radio or Business radio > Press: switch on/off. When you switch on, the last set radio station or CD track is played. > CD player > Turn: adjust volume. > CD changer* 2 3 4 Controls 5 Buttons near CD player The layout of the buttons can vary depending on your vehicle's equipment.
3. Turn the controller until "Settings" is selected and press the controller. At a glance From another menu, you can change directly to the screen last displayed, refer to Comfort opening of menu items, page 18.< Controls With the ignition key in radio-ready position or higher, the selected audio source is stored for the remote control currently in use. Switching on/off Adjusting volume Treble and bass 1. Change to upper field if necessary.
On/off and tone Balance and fader Individual high-end sound system* You can adjust the volume distribution in the same manner as "Treble / Bass". You can choose between Stereo and Surround. > "Balance": left/right volume distribution 1. Select "Surround Settings" and press the controller. > "Fader": front/rear volume distribution Speed-dependent volume control The speed-dependent volume control automatically increases the volume with increasing speed.
Resetting tone settings You can reset all tone settings to the default settings. 1. Open the start menu. At a glance 2. Select "Concert hall" or "Theater". 3. Turn the controller until "Settings" is selected and press the controller. 4. Select "Audio" and press the controller. Driving tips To switch off spatial sound: Select "Off" and press the controller. LOGIC7 and the LOGIC7 logo are registered trade marks of Lexicon, Inc., a company of the Harman International Group.
Radio Radio Your radio provides reception of the FM and AM wavebands. Changing stations Listening to radio Turn the controller. In addition to the stations currently displayed, you can have stations with another selection criterion displayed. Press the button if the sound output is switched off. Professional* radio 1. Press the button. This opens the start menu. You can choose from the following selection criteria: 2. Move the controller backwards to call up "Entertainment".
Changing selection criteria 2. Select "Scan" and press the controller. 1. Change into the second field from the top. This cancels sampling of the stations, and the radio remains on the current station. 2. Turn the controller until the desired selection criterion is selected and press the controller. To end sampling: 1. Press the controller. Buttons next to CD player To sample the stations, press and hold the button for the corresponding direction. At a glance The stations are sampled.
Radio 4. Press the controller. Other menu items are displayed. 5. Select "Store" and press the controller. 4. Press the controller. Other menu items are displayed. 5. Select "Autostore" and press the controller. "Presets" is displayed. 6. Turn the controller until the desired memory position is selected. 7. Press the controller. The station is stored. The display of the stations with the strongest reception is updated. The frequencies of the stations are displayed. Storing stations 1.
1. Select "All stations" and press the controller. "Set" is selected. 2. Select "Favorites" and press the controller. Driving tips 5. Turn the controller until the desired memory position is selected. The number of the memory position appears beside the name or frequency of the station. At a glance For the "All stations" selection criterion, you can set whether the most frequently used stations are displayed at the beginning. Controls Automatically sorting stations* 6. Press the controller.
Radio Calling up weather news flashes 1. Select "WB" and press the controller. 6. Select "Off" and press the controller. The reception of digital stations is deactivated. This symbol is displayed when a station is being received digitally. 2. Select a station. The station for weather news flashes may be unavailable in some regions. High Definition Radio* Many stations transmit both analog and digital signals. You can receive these stations digitally and with improved sound quality.
1. Select "FM" or "AM" and press the controller. At a glance With the digital stations, additional information on the current track is displayed, e.g. the name of the artist. 1. Select a station and press the controller. 2. Select "Details" and press the controller. Controls If you are on a longer journey and leave the transmission range of the stations originally set, you can update the list of stations with the best reception signal. Displaying additional information The information is displayed.
Radio Enabling or disabling channels Disabling 1. Press the button. This opens the start menu. 1. Select an enabled channel and press the controller. 2. Move the controller backwards to call up "Entertainment". 3. Select "SAT". 2. Select "ESN" and press the controller. The electronic serial number, ESN, is displayed. 4. Press the controller. The electronic serial number is required to disable.< 3. To have the channels disabled: Dial phone number. Selecting and storing channel 1.
3. Press the controller. Select a channel marked with this symbol. 1 Artist 2 Track Storing channel 1. Select the desired channel. 2. Press the controller. Other menu items are displayed. 3. Select "Store" and press the controller. 6. Press the controller. Other menu items are displayed. "Presets" is displayed. 159 Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG Mobility The channels of this category are displayed. 5.
Radio 4. Turn the controller to select a memory position and press the controller. The channel is stored. The stations of the last selection criterion are displayed again after a short time. Changing channel with buttons next to CD player Press the button for the corresponding direction. The system changes to the next enabled channel. Notes If no signal can be received for more than 4 seconds, a message is displayed on the Control Display. Reception may not be possible for certain reasons, e.g.
Listening to CDs Compressed audio files* 3. Change to upper field if necessary. Turn the controller until "CD" is selected and press the controller. Controls CDs with compressed audio files, i.e. MP3, can be played by the CD player, but not by the CD changer. At a glance CD player and CD changer* To start playback when there is already a CD in the drive: 1. Press the button. This opens the start menu. 2. Move the controller backwards to call up "Entertainment".
CD player and CD changer 4. Change to the second field from the top if necessary. Turn the controller until the desired CD, CD 1 - 6, is selected and press the controller. At the end of the last track, the next CD will be selected. Compressed audio files* 1. Select the directory if necessary and press the controller. 2. Select the track and press the controller. If the CD magazine has been newly filled, playback begins with the lowest CD, e.g. CD 1, track 1.
1. Press the controller. 2. Select "Scan" and press the controller. This cancels sampling of the tracks, and the player remains on the current track. Compressed audio files* 1. Select the current track and press the controller. 2. Select the desired menu item: The information about the current track is displayed. > To sample all tracks of the current directory, select "Scan directory" and press the controller. From radio readiness, the setting for the remote control used at the moment is saved.
CD player and CD changer 2. Select "Repeat" and press the controller. Random play sequence In this mode, the tracks on the current CD are played once in a random sequence. 1. Select "Set" and press the controller. Other menu items are displayed. 2. Select "Random" and press the controller. To cancel random mode: 1. Press the controller. 2. Select "Random" and press the controller. The current track on the CD is repeated. To cancel repeat mode: Compressed audio files* 1. Press the controller again. 1.
To insert: Insert one CD into each compartment of the magazine with the labeled side up. Notes BMW CD/DVD players and changers are officially designated Class 1 laser products. Do not operate if the cover is damaged, otherwise severe eye damage can result. Do not use self-recorded CDs with adhesive labels as these can come loose during playback due to heat build-up and cause irreparable damage to the system. Only use round CDs/DVDs with a standard diameter of 4.
CD player and CD changer Malfunctions with individual CDs/DVDs If malfunctions occur only with particular CDs/ DVDs, this can be due to one of the following causes. Home-recorded CDs/DVDs Possible reasons for malfunctions with selfrecorded CDs/DVDs are, e.g., inconsistent data-creation or recording processes, or poor quality or advanced age of the CD/DVD blank. Label CDs/DVDs only on the top, using a marker designed for this purpose. Damaged CDs/DVDs Avoid fingerprints dust, scratches, and moisture.
4. Select "AUX" and press the controller. 5. Adjust volume and sound if necessary. Controls You can connect an external audio device, e.g. an MP3 player, and play the sound via the vehicle loudspeakers. The sound can be adjusted via iDrive. At a glance AUX-In connection Navigation Driving tips Connecting Communications Entertainment For audio playback via the vehicle loudspeakers, connect the headphones or the line-out connection of the device to the socket 1 with a 1/8 in/3,5 mm jack plug.
Online Edition for Part no.
Communications This chapter summarizes how to operate your mobile phone using iDrive or voice control and how to use BMW Assist or TeleService. Online Edition for Part no.
Telephoning Telephoning* The concept Your BMW is equipped with a full mobile phone preparation package. After a suitable mobile phone has been paired in the vehicle once, you can operate the mobile phone via iDrive, with the buttons on the steering wheel and by voice. A mobile phone that has been paired once is automatically detected again as soon as it is brought back inside the vehicle, provided that the engine is running or the ignition is switched on.
> Voice commands, refer to page 181 A mobile phone detected by the vehicle should not be operated by the mobile phone's keypad; otherwise malfunctions may occur. Placing phone calls with BMW Assist system*: BMW Assist calls You can use the BMW Assist system via the hands-free unit for BMW Assist calls. When the status information "BMW Assist" or "BMW Service" is displayed in "Communication", only BMW Assist calls are possible.
Telephoning 5. Select "Settings" and press the controller. 9. Select "Start pairing" and press the controller. 6. Select "Bluetooth" and press the controller. The Bluetooth name of the vehicle is displayed. 7. Change into the second field from the top, select "Phone" and press the controller. Preparation with mobile phone 10. Additional operations must be carried out on the mobile phone and differ depending on the model, refer to the operating instructions of your mobile phone, e.g.
> Do the Bluetooth passkey on the mobile phone and the vehicle match? The same Bluetooth passkey must be entered both on the mobile phone display and via iDrive. > Only a limited number of devices can be connected to the mobile phone. Delete the connection to other devices if necessary. The next time you use the mobile phone in the vehicle interior, it will be detected within a maximum of 2 minutes with the engine running or the ignition switched on.
Telephoning The phone number of the BMW Hotline and information required for pairing is shown on the display. With mobile phones already paired, you can select the phone number of the BMW Hotline to establish the connection. 7. Select "Move device up" and press the controller. List of paired mobile phones The mobile phones for which the vehicle has stored the pairing data can be displayed.
> Select the desired mobile phone and press the controller. 5. Select "Bluetooth" and press the controller. At a glance 4. Select "Settings" and press the controller. The unpaired mobile phone is deleted from the list. The phone book entries and the lists of stored phone numbers are also deleted. 7. Select "Bluetooth communication active" and press the controller to activate or deactivate the link. Activating/deactivating Bluetooth link Bluetooth technology is not approved in all countries.
Telephoning Adjusting volume speech quality during a call, we recommend that you: > Reduce background noises, e.g. by closing the windows, reducing the air volume of the automatic climate control or pointing the opened front vent outlets downward. > Reduce the volume of the hands-free system. Requirements Turn the knob during a call to select the desired volume. This volume for the hands-free system is maintained, even if the other audio sources are set to minimum volume.
Press the button on the steering wheel. Alternative: 4. Select "Dial number" and press the controller. Calling For your phone number to be displayed to the person you are calling, the display of phone numbers must be enabled by your service provider. Dialing phone numbers Ending call 1. Select "Phone" and press the controller. Press the button on the steering wheel. Alternative: 1. Select the phone number and press the controller. 2. Select "Dial" and press the controller. Mobility 3.
Telephoning 2. "End call" is selected: Press the controller. Dialing phone numbers from phone book The list "A - Z" is available for you phone book entries. The phone book entries appear on the Control Display. 1. Select "Phone" and press the controller. Dialing a phone number from phone book or a phone number stored in a list Phone numbers you have called, incoming calls and the entries of the phone book are stored in lists when the mobile phone is connected to the vehicle via Bluetooth.
Deleting individual entries 6. Select "Dial number" and press the controller. 1. Select the desired entry from the list and press the controller. Dialing a phone number stored in a list 2. Select "Delete" and press the controller. At a glance 5. Change the phone number. To select an entry and establish a connection: Controls 1. Select "Phone" and press the controller. 2.
Telephoning You can dial the displayed service phone numbers if your mobile phone is paired in the vehicle: Transferring phone number via tone dialing method iDrive, for explanation of principle, refer to page 16. The tone dialing method is required for access to network services or for controlling devices, e.g. remote checking of an answering machine. 1. Press the button. This opens the start menu. This function is available when a connection has been established. 2.
From mobile phone to hands-free system You can operate your mobile phone without having to remove your hands from the steering wheel. When making your entries, you will be supported by announcements or questions in many cases. From hands-free system to mobile phone When you telephone via the hands-free system, you can also continue the call via the mobile phone if necessary, depending on the mobile phone model.
Telephoning Example: dialing phone numbers Start the dialog: Press the button on the steering wheel. You say The voice control answers {Dial number} {{Please say the number}} e.g. {123 456 7890} Depending on equipment: {{123 456 7890. Continue?}} or {{123 456 7890.
3. Say the phone number after being requested to do so by the system. 4. To store the phone number: {Save}. Delete entry: You can delete any entry from the voice phone book. 1. {Delete name}. The dialog for deleting an entry is opened. 2. Say the name when prompted. 3. Confirm the prompt with {Yes}. Delete all entries: {Delete phone book} deletes all entries in the phone book. 1. {Delete phone book}. The dialog for deleting phone book is opened. 2. Confirm the prompt with {Yes}. 3.
Telephoning 2. Insert the snap-in adapter at the front and press down until it engages. To protect the vehicle's batteries, avoid using the phone when the ignition is switched off.< Removing mobile phone To remove the snap-in adapter: Press the area 1 around the button. Press button. Inserting mobile phone 1. Remove the protective cap from the mobile phone's antenna connector if necessary, so that the mobile phone can engage in the snap-in adapter. 2.
You can use BMW Assist when the following requirements are met: > The installed BMW Assist system is logged in on a mobile phone network. This network must be capable of transmitting the services. > To transmit position data, the vehicle must be able to determine the current position. > A GPS signal must be available in order for BMW Assist to be activated and updated.
BMW Assist In addition, you can be provided with other services, e.g. the information service or information on route planning, the traffic situation and the weather. Press the SOS button to contact the BMW Assist Response Center, see below. Breakdown assistance iDrive, for explanation of principle, refer to page 16. 1. Press the button. This opens the start menu. You also have access to the BMW Assist information service via the Internet.
6. Select "Service notification" and press the controller. TeleService At a glance The BMW Assist Response Center will connect you to the Roadside Assistance of the BMW Group. Automatic service notification* You can transmit data on the service status of your vehicle to your BMW center if you want to make an appointment for service. 1. Press the button. This opens the start menu. 2. Move the controller forwards to select "Communication". 3. Change to upper field if necessary.
BMW Assist The data relevant for service are transmitted. Your BMW center will contact you to set up an appointment for service. Contacting BMW Customer Relations For information on all aspects of your vehicle, you can contact BMW Customer Relations. 1. Press the button. This opens the start menu. 2. Move the controller forwards to select "Communication". 3. Change to upper field if necessary. Turn the controller until "BMW Assist" is selected and press the controller.
3. Turn the controller until "Settings" is selected and press the controller. 2. Select a menu item: > With "Call" you can establish a telephone connection. This requires your Bluetooth mobile phone to be paired in the vehicle. 5. Change to upper field if necessary. Turn the controller until "Service Status" is selected and press the controller. The current services available from BMW Assist are displayed. 6. If applicable, select "Options" and press the controller.
BMW Assist Blocking services* Activating BMW Assist If you block the services, the connection to BMW Assist is deactivated. For you to be able to use the services of BMW Assist, BMW Assist must be activated. 1. Press the button. This opens the start menu. Requirements 2. Press the controller to open the menu. 3. Turn the controller until "Settings" is selected and press the controller. 4. Turn the controller until "BMW Service settings" is selected and press the controller.
Displaying vehicle data When BMW Assist is activated, the license plate and the vehicle identification number of your vehicle can be displayed. At a glance 4. Turn the controller until "BMW Service settings" is selected and press the controller. 1. Open the start menu. 3. Select "Settings" and press the controller. 6. Select "Enable services" and press the controller. BMW Assist is activated and the data exchange with the BMW Assist Response Center begins. 5. Change to upper field if necessary.
Online Edition for Part no.
Mobility This section helps you maintain your mobility by supplying important information on vital topics including fuels and lubricants, wheels and tires, service, maintenance and breakdown assistance. Online Edition for Part no.
Refueling Refueling Switch off the engine before refueling, otherwise no fuel can be filled into the tank and a message is displayed.< When handling fuel, always observe all applicable precautionary measures and regulations. Never transport reserve fuel containers in the vehicle. They can leak and cause an explosion or a fire in an accident.< Observe the following when refueling When handling fuels always follow any safety guidelines posted at the gas station.
At a glance Fuel specifications Controls Never used leaded gasoline; it will permanently damage the catalytic converter. Do not use E85, i.e. fuel that consists of 85% ethanol, or Flex Fuel. Otherwise permanent damage to the engine and the fuel supply system will result.< Required fuel Super Premium Gasoline/AKI 93 Driving tips Always use this premium grade fuel to obtain maximum fuel economy and performance. The minimum approved fuel grade is AKI 91.
Wheels and tires Wheels and tires Tire inflation pressure Tire inflation pressures for driving up to 100 mph/160 km/h Information for your safety For normal driving up to 100 mph/160 km/h, adjust pressures to the respective tire inflation pressures listed on the following pages in the column for traveling speeds up to a max. of 100 mph/160 km/h to achieve optimum driving comfort.
At a glance Pressure specifications in psi/kPa Traveling speeds up to max. of 100 mph/160 km/h Traveling speeds including those exceeding 100 mph/160 km/h All pressure specifications in the table are indicated in psi/kilopascal with cold tires.
Wheels and tires Tire identification marks Knowledge of the labeling on the side of the tire makes it easier to identify and choose the right tires. Tire size e.g.
Winter and all-season tires. These have better winter properties than summer tires. XL Indicates specially reinforced tires. Tire condition Inspect your tires frequently for tread wear, signs of damage and foreign objects lodged in the tread, and check the tread depth. Minimum tread depth The tread depth should not drop below 0.12 in/ 3 mm, although, for example, European legislation only specifies a minimum tread depth of 0.063 in/1.6 mm. At tread depths below 0.
Wheels and tires New wheels and tires Only have new wheels and tires mounted by a BMW center or a repair shop that works in accordance with BMW guidelines and uses appropriately trained personnel. If this work is performed inexpertly, there is a danger of damage and associated safety risks. Make sure that the new wheels are balanced.
Reinitialize the system for this purpose: 1. Move the selector lever into the idling position N on a straight stretch of road at a speed between 20 mph/30 km/h and 90 mph/150 km/h. 2. Pull both shift paddles for approx. 2 seconds. At a glance Driving tips If you do not carry out initialization, the system will automatically learn the changed state gradually during driving. This may be noticeable from the clutch opening and closing briefly.
Under the hood Under the hood Never attempt to perform any service or repair operations on your vehicle without the required professional technical training. If you are unfamiliar with the specifications to be observed, only have work carried out on your vehicle by a BMW center or a repair shop that works in accordance with BMW guidelines and uses appropriately trained personnel. Otherwise, there is a danger of damage and associated safety risks if this work is performed improperly.
Expansion tank for coolant, refer to page 205 3 Jump-starting terminal, refer to page 220 At a glance Body ground/negative terminal 5 Filler neck for washer fluid of the headlamp and windshield cleaning systems, refer to page 66 1 Oil level 2 Maximum marking 3 Minimum marking Communications Entertainment 2 4 Engine oil Engine oil consumption depends on driving style and driving conditions. Checking engine oil level Your vehicle is equipped with an electronic oil level check.
Under the hood After starting the engine, the last determined value is displayed. Possible displays The oil level must be between the two marks. Manual transmission: the fluid level will be shown in the lower display.< Exact measurement The oil level is measured continuously while driving or when stopped with the engine running. The determination of a new value can take 30 minutes or longer. If only dashes are shown in the display, it was not possible to determine a new value.
Low ambient temperatures The oils used by BMW from the factory for your vehicle model can be used at virtually all ambient temperatures. However, if the vehicle is operated for a longer period at temperatures below –47/–206, your BMW center will be happy to recommend a suitable oil. Approved engine oils The quality of the engine oil selected has critical significance for the operation and service life of an engine.
Under the hood 3. The coolant level is correct when the upper end of the float rod is at the same height as the upper edge of the filler neck, also refer to the drawing next to the filler neck. 4. If the coolant is low, slowly add coolant up to the specified level – do not overfill. 5. Turn the cap until it clicks. 6. Have the reason for the coolant loss eliminated as soon as possible. 206 Online Edition for Part no.
At a glance Maintenance BMW Maintenance System > Vehicle check CBS Condition Based Service Sensors and special algorithms take the different driving conditions of your BMW into account. Condition Based Service uses this to determine the current and future service requirements. By letting you define a service and maintenance regimen that reflects your own individual requirements, the system builds the basis for trouble-free driving.
Maintenance Socket for OBD Onboard Diagnostics interface Event data recorders Your vehicle may be equipped with one or several measuring and diagnosis modules, or with a device for recording or transmitting certain vehicle data or information. If you have also subscribed to a BMW Assist plan, then certain vehicle data can be transmitted or recorded to enable corresponding services. Care Components which are decisive for the exhaust-gas composition can be checked via the OBD socket with a device.
Replacing wiper blades When performing maintenance on the headlamps, follow the instructions in the separate Caring for your vehicle brochure. For bulbs for which changing is not described, and for checking and adjusting headlamp aim, please contact your BMW center.< Light-emitting diodes LEDs 1. Fold the wiper arm out and grasp it firmly. 2. Press the locking tabs together while sliding the wiper blade toward the front to disengage it. 3.
Replacing components Have work on the xenon lighting system performed only by your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Due to the high voltage involved, there is a danger to life and limb when work is carried out improperly.< High beams, parking lamps Front turn signals, side marker lamps Your BMW is equipped with two turn signal lamps per side in the front.
Side turn signals 5-watt bulb, WY5W 4. Turn the cover around the rear securing point 2 upward while simultaneously pulling it out of the trim panel at the bottom. 5. Turn the bulb holder to the left and remove, refer to arrow. 2. Turn the bulb holder to the left by 90 5 and remove. Driving tips Controls 1. Press against the front edge of the lamp with the tip of your finger, then push it to the rear, release the snap connection at the front and take it off the trim strip. At a glance 3.
Replacing components Rear turn signals Repairing flat tire with M Mobility System To repair a flat tire, an M Mobility System is provided in the BMW M6. Using this system you can apply a sealant in the inside of the tire, seal off the damaged area, restore the tire inflation pressure and then continue driving. 21-watt bulb, PY21W The illustrations shows the left section of the luggage compartment. 1. Remove the cover. 2. Unclip the bulb holder and remove. 3.
Model with pressure gauge integrated in housing* Please observe the best-by date on the sealant bottle.< At a glance Pull the sticker for the speed limit off the sealant bottle and apply it to the steering wheel.
Replacing components 4. Screw dust cap off valve of defective wheel and screw filling hose 2 of sealant bottle onto valve. Producing tire inflation pressure 5. Insert sealant bottle on compressor housing so that it is positioned upright. 2. Screw compressor hose 9 directly onto tire valve. 1. After approx. 2 miles/3 km, stop at suitable location. 3. Insert connector 3 in lighter socket in vehicle interior. 4. Correct tire inflation pressure to 29 psi/ 200 kPa.
What you will need To avoid rattling noises later on, note the positions of the tools before removing them, then return them to their initial positions after completing work. At a glance 2 Vehicle jack* 3 Lug wrench* The tools are located in the hollow of the spare wheel. Spare wheel* 1. Fold up the convertible top compartment floor, refer to Convertible: increasing luggage compartment capacity, page 35. 2. Pull back lock 1, fold open tensioning lock 2 completely and loosen the belt 3. 3.
Replacing components Jacking up vehicle 3. Position the new wheel or spare wheel. Secure the wheel by screwing at least two lug bolts into opposite bolt holes. When you mount wheels other than Genuine BMW light-alloy wheels, different lug bolts may also be required. 4. Screw in the remaining lug bolts. Tighten all the bolts securely in a diagonal pattern. 5. Lower the vehicle and remove the jack from beneath the vehicle. The jacking points for the car jack are located in the positions shown. 1.
Convertible: hook the belt into the lashing eyes 5 and 7 and lay it in the belt guide of the lid which runs offset. Only charge the battery in the vehicle via the terminals in the engine compartment with the engine switched off. For the connections, refer to Jump starting on page 220. Disposal After replacement, have old batteries disposed of by your BMW center or deposit them at a recycling center. Maintain the battery in an upright position for transport and storage.
Replacing components Fuses Never attempt to repair a blown fuse, and do not replace a defective fuse with a substitute of another color or amperage rating, as this could lead to overloading of the wiring, ultimately resulting in a fire in the vehicle.< Spare fuses and a pair of plastic tweezers are located in the compartment for the onboard tool kit, refer to page 209. Information on fuse allocation is located below the bracket for the onboard tool kit, see below. In glove compartment 1.
> Radio readiness is activated. > The BMW Assist system is logged on to a mobile phone network. > The emergency call system is operable. Once your service contract for BMW Assist expires, the BMW Assist system can be deactivated by a BMW center without you having to visit a workshop. Following deactivation of the BMW Assist system, no emergency calls can be made. The BMW Assist system can be reactivated after concluding a new agreement at a BMW center. Initiating an emergency call 1.
Giving and receiving assistance First-aid kit* The first-aid kit is located in the filler element of the rear seat backrest. 1. Press the button downward and pull the filler element forward. With BMW Assist you can contact the Roadside Assistance of the BMW Group for assistance in the event of a breakdown directly via iDrive, refer to page 186. Jump starting When your battery is discharged, you can use two jumper cables to start your BMW with power from the battery in a second vehicle.
wait a few minutes before another attempt in order to allow the discharged battery to recharge. 3. Let the engines run for a few minutes. At a glance 1. Fold open the cover of the BMW jumpstarting terminal. To do so, pull the tab. Tow-starting and towing 3. Attach the second end of the cable to the positive terminal of the battery or to a jumpstarting terminal of the vehicle to be started. Do not transport any passengers other than the driver in a vehicle that is being towed.< 4.
Giving and receiving assistance Rear: press the arrow symbol on the cover while prying out the cover upward by hand. With tow bar The towing vehicle may not be lighter than the vehicle to be towed; otherwise, it will not be possible to reliably control vehicle response.< The tow fittings used should be on the same side on both vehicles.
At a glance Tow-starting Do not tow-start the vehicle if possible, but instead start the engine by means of jump starting, refer to page 220. With a catalytic converter, the vehicle should only be tow-started with the engine cold. Controls Manual transmission 1. Switch on the hazard warning flashers, comply with country-specific regulations. 2. Switch on the ignition, refer to page 58. Driving tips 3. Shift into 3rd gear. 4. Tow-start with the clutch completely depressed and slowly release the clutch.
Online Edition for Part no.
Reference This chapter contains the technical data, the short commands of the voice command system, and the index that will direct you as quickly as possible to the information you are looking for. Online Edition for Part no.
Technical data Technical data Dimensions Coupe All dimensions given in inches/mm. Smallest turning circle diam.: 41.0 ft/12.5 m 226 Online Edition for Part no.
At a glance 227 Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG Reference Mobility All dimensions given in inches/mm. Smallest turning circle diam.: 41 ft/12.
Technical data Weights M6 Coupe M6 Convertible Curb weight lbs./kg 3,909/1,773 4,398/1,995 Approved gross vehicle weight lbs./kg 4,850/2,200 5,247/2,380 Load lbs./kg 941/427 849/385 Approved front axle load lbs./kg 2,403/1,090 2,469/1,120 Approved rear axle load lbs./kg 2,646/1,200 2,844/1,290 Luggage compartment capacity cu ft/l 15.9/450 10.6/300 > with raised convertible top compartment floor, refer to page 35 cu ft/l – 12.
Function Command To open the assistance window 20 {Assistance window} To select the display in the assistance window 20 {Assistance window map facing north}, {Assistance window map direction of travel}, {Assistance window arrow display}, {Assistance window perspective}, {Assistance window current position}, {Assistance window trip computer} or {Assistance window onboard info} To change scale in assistance window 122 {Assistance window scale ... feet} or {Assistance window scale ...
Short commands of voice command system Navigation Function Command To open navigation 122 {Navigation} To open "Enter address" {Enter address} To open "New destination" {New destination} To display "Input map" {Input map} To display destination list {Destination list} To display the address book {Address book} To display the route criteria {Route preference} To start destination guidance {Start guidance} To end destination guidance {Stop guidance} To display arrow display {Arrow displa
At a glance Entertainment Command {Audio} To switch on radio 152 {Radio on}, {FM} or {AM} To open "FM" 152 {FM menu} To open "AM" 152 {AM menu} To open "All stations" 152 {FM All stations} To select the radio station 152 {Station ...}, e.g. {Station WNYC}, or {Choose station} To open "Presets" 152 {FM presets} or {AM presets} To select preset radio station 152 {Preset ...}, e.g. {Preset 1} To open "Manual" 153 {FM manual}, {AM manual} or {Choose frequency}, {Frequency ...
Short commands of voice command system Climate Function Command To open "Vent settings" 101 {Vent settings} To open "Automatic programs" 100 {Automatic programs} To open "Parked car ventilation" 103 {Parked car operation} To open "Automatic ventilation" 103 {Automatic ventilation} To display the activation times 103 {Activation time} menu Function Command To open the menu {Settings menu} "Display off" 21 {Display off} To open "Info sources" {Info sources} To open "Settings" {Settings}
233 Reference Online Edition for Part no.
Everything from A to Z Everything from A to Z Index "..." Identifies Control Display texts used to select individual functions, and indicates where to find them in the text.
Backrest contour, refer to Lumbar support 47 Backrests, refer to Seats 47 Backrest width adjustment 47 Backup lamps, replacing bulbs, refer to Tail lamps 211 "Balance", refer to Tone control 150 Band-aids, refer to First-aid kit 220 Bass, refer to Tone control 149 "Bass", tone control 149 Battery – jump starting 220 – refer to Vehicle battery 217 Battery replacement, remote control for comfort access 38 BC button, refer to Computer 69 Being towed 222 Belts, refer to Safety belts 51 235 Online Edition for P
Everything from A to Z Brake system 114 – brake pads 114 – brake rotors 116 – breaking-in 114 – warning lamp 13, 83 Braking safely 116 Breakdown, M Mobility System 212 Breakdown assistance 186 Breakdown services, refer to Roadside Assistance 220 Breaking-in 114 Breaking-in brake pads 114 Breaking-in the clutch 114 Breaking-in the differential, refer to Engine and differential 114 "Brightness" 78, 93 Brightness of Control Display 78 Button for starting engine, refer to Start/Stop button 58 Buttons on steeri
237 Online Edition for Part no.
Everything from A to Z D Dashboard, refer to Cockpit 10 Data, technical 226 – capacities 228 – dimensions 226 – measurements 226 – weights 228 "Date" 78 Date – display format 78 – setting 78 "Date format" 78 "Daytime running lamps" 96 Daytime running lamps 96 DBC Dynamic Brake Control, warning lamp 84 "Deactivated" 49 Decommissioning the vehicle, refer to Caring for your vehicle brochure Defect – tires, refer to Flat Tire Monitor 84 – tires, refer to Tire Pressure Monitor 86 Defrosting windows 101 Defrosti
239 Online Edition for Part no.
Everything from A to Z Exhaust system, refer to Hot exhaust system 115 Exterior mirrors 52 – adjusting 52 – automatic dimming feature 52 – automatic heating 52 – folding in and out 52 – tilting down passenger-side mirror 52 External audio device 107 Eye for tow-starting and towing, refer to Tow fitting 221 Eyes for lashing, refer to Securing cargo 118 F "Fader", refer to Tone control 150 Fader, refer to Tone control 150 Failure messages, refer to Check Control 73 False alarm – refer to Avoiding unintentio
241 Online Edition for Part no.
Everything from A to Z Indicator/warning lamps – ABS Antilock Brake System 83 – airbags 90 – brake system 83 – DSC 13, 82 – Flat Tire Monitor 86 – handbrake 13, 60 – MDrive 13, 54 – M Dynamic Mode 13, 82 – parking lamps/low beams 13 – safety belt warning 51 – TPM Tire Pressure Monitor 87 Indicator and warning lamps, overview 13 Inflation pressure, refer to Tire inflation pressure 196 Inflation pressure monitoring – refer to Flat Tire Monitor 84 – refer to Tire Pressure Monitor 86 Info menu 17 Information –
At a glance Controls Driving tips Navigation Communications Entertainment M Dynamic Mode MDM 82 – indicator lamp 13, 82 M Engine Dynamic Control 64 – "P 400" 64 – "P 500" 64 – "P 500 Sport" 64 M Mobility System 212 M+S tires, refer to Winter tires 200 Maintenance 207 – refer to Service and Warranty Information Booklet for US models 207 – refer to Service requirements 71 – refer to Warranty and Service Guide Booklet for Canadian models 207 Maintenance system 207 Malfunction – convertible top 42 – door lock
Everything from A to Z Mobile phone – accepted calls 179 – adjusting volume 176 – calling 177 – ending call 177 – installation location, refer to Center armrest 107 – missed calls 179 – operation by voice 181 – operation via iDrive 176 – redialing 179 – refer to separate operating instructions – Top 8 179 – touch tone dialing, refer to Tone dialing method 180 Mobile phone battery 184 Mobile phones, use in vehicle, refer to Mobile communications devices in vehicle 115 Mobile Service, refer to Roadside Assis
At a glance Controls Driving tips Navigation Communications Entertainment "P 400" 64 "P 500" 64 "P 500 Sport" 64 Panic mode 31 Park Distance Control PDC 80 "Parked car operation" 103 "Parked car ventilation" 103 Parked car ventilation – activating activation times 104 – setting activation time 103 – switching on and off directly 103 Pollen, refer to Microfilter/ activated-charcoal filter 103 Position – displaying 144 – storing 132 "POWER" 54 POWER, refer to M Engine Dynamic Control 64 Power failure 217 Po
Everything from A to Z R Radiator fluid, refer to Coolant 205 Radio – Autostore 153 – controls 148 – High Definition Radio 156 – sampling stations 153 – satellite radio 157 – selecting frequency manually 153 – selecting waveband 148, 152 – station search 153 – station selection 152 – station with best reception 153 – storing stations 154 – switching on/off 148 – tone control 149 – volume 149 – Weather Band, refer to Weather news flashes 155 Radio key, refer to Keys/ remote control 28 Radio position, refer
247 Online Edition for Part no.
Everything from A to Z Settings – changing on Control Display 76 – clock, 12h/24h mode 77 – configuring, refer to MDrive 54 – configuring, refer to Personal Profile 29 – date 78 – language 79 – units of measure 78 Settings menu, refer to i menu 17 Setting time, refer to Preselecting activation time 103 Shifting 62 Shift lights 63 Shiftlock 61 Shift paddles on steering wheel 62 Shock absorber control, refer to EDC Electronic Damping Control 84 Short commands of voice command system 229 "Short route" for nav
249 Online Edition for Part no.
Everything from A to Z Towing 221 – methods 222 – tow fittings 221 – with manual transmission 222 "Town / City" for destination entry 125 Tow rope 222 Tow-starting 221 "TPM" 87 TPM Tire Pressure Monitor 86 – resetting system 87 – system limits 86 – warning lamp 87 Tracks – finding 163 – random play sequence 164 – sampling on CD 163 – selecting with CD 162 Track width, refer to Dimensions 226 Traction control, refer to DSC Dynamic Stability Control 82 Traffic congestion – displaying traffic information 140
251 Online Edition for Part no.
Everything from A to Z Wood decoration, refer to Caring for your vehicle brochure Word matching principle for navigation 135 Working in the engine compartment 202 Wrenches/screwdrivers, refer to Onboard tool kit 209 X Xenon lamps 209 – replacing bulbs 209 Y Your individual vehicle – programmable button on steering wheel 53 – settings, refer to MDrive 54 – settings, refer to Personal Profile 29 252 Online Edition for Part no.
Online Edition for Part no.
More about BMW The Ultimate Driving Machine 01 41 0 013 314 ue bmwusa.com *BL001331400A* Online Edition for Part no.