Technical data

Turn adjusting screw 1 to the
desired position.
The adjusting screw is
easier to turn if you push
the handbrake lever forward.
Four settings are possible:
Position 1: smallest span
between handlebar grip and
brake lever
Position 4: largest span
between handlebar grip and
brake lever
Mirrors
Adjusting mirrors
Turn the mirror to the correct
position.
Adjusting mirror arm
Push protective cap 1 up over
the threaded fastener on the
mirror arm.
Slacken nut 2.
Turn the mirror arm to the ap-
propriate position.
Tighten the nut to the spe-
cified tightening torque, while
holding the mirror arm to en-
sure that it does not move out
of position.
Mirror (lock nut) to ad-
apter
22 Nm
4
66
z Operation