Operation Manual

Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ASC intervention
with Automatic Stability Con-
trol
OE
The ASC symbol appears
on the display.
The ASC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The warning light flashes
for longer than ASC intervention
lasts. This affords the rider visual
feedback on control intervention
even after the critical situation
has been dealt with.
Off-road ASC intervention
with Automatic Stability Con-
trol
OE
The "General" warning light
quick-flashes yellow.
The off-road ASC symbol
appears on the display.
The off-road ASC has detected
a degree of instability at the rear
wheel and has intervened to re-
duce torque. The warning light
flashes for longer than ASC in-
tervention lasts. This affords the
rider visual feedback on control
intervention even after the critical
situation has been dealt with.
ASC self-diagnosis not
completed
with Automatic Stability Con-
trol
OE
The ASC symbol slow-
flashes.
Possible cause:
The ASC function is not avail-
able, because self-diagnosis did
not complete. The motorcycle
has to move forward at a speed
of at least 5 km/h for the wheel
sensors to be tested.
Pull away slowly. The ASC
warning light must go out
within a few metres.
If the ASC warning light contin-
ues to flash:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
ASC self-diagnosis in off-
road mode not completed
with Automatic Stability Con-
trol
OE
The off-road ASC symbol
slow-flashes.
3
34
z Status indicators