Operation Manual

Possible cause:
The ASC function is not avail-
able, because self-diagnosis did
not complete. The motorcycle
has to move forward at a speed
of at least 5 km/h for the wheel
sensors to be tested.
Pull away slowly. The ASC
warning light must go out
within a few metres.
If the ASC warning light contin-
ues to flash:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
ASC deactivated
with Automatic Stability Con-
trol
OE
The ASC symbol appears
on the display.
Possible cause:
The rider has switched off the
ASC system.
Switch on the ASC function.
ASC fault
with Automatic Stability Con-
trol
OE
The "General" warning light
shows yellow.
The ASC symbol appears
on the display.
Possible cause:
The ASC control unit has detec-
ted a fault. The ASC function
and the off-road ASC function
are not available.
You can continue to ride. Bear
in mind that the ASC function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ASC fault ( 83).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Tyre pressure close
to limit of permitted
tolerance
with tyre pressure monitoring
(RDC)
OE
The "General" warning light
shows yellow.
The tyre symbol appears
on the display.
The critical tyre pressure flashes.
Possible cause:
Measured tyre pressure is close
to the limit of permitted toler-
ance.
Correct the tyre pressure as
stated on the inside cover of
the Rider's Manual.
3
35
z Status indicators