Operation Manual

beam throw so as not to dazzle
oncoming traffic.
a Neutral position
b Position for heavy load
Front and rear seats
Remove the rear seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the key clockwise in seat
lock 1 and hold it in this pos-
ition while pressing down the
front part of rear seat 2.
Lift the rear seat at the front
and release the key.
Remove the rear seat and
place it, upholstered side down,
on a clean surface.
Remove the front seat
Remove the rear seat ( 61).
Turn the key counter-clockwise
in seat lock 1 and hold it in this
position while pressing down
the rear part of front seat 3.
Lift the front seat at the rear
and release the key.
Remove the front seat and
place it, upholstered side down,
on a clean surface.
4
61
z Operation