Operation Manual

Running-in speeds
maximum engine rpm for
short bursts (Odometer
reading 600...900 km)
Do not omit the first inspection
after 500 - 1200 km.
Brake pads
New brake pads have to bed
down before they can achieve
their optimum friction levels. You
can compensate for this initial re-
duction in braking efficiency by
exerting greater pressure on the
levers.
New brake pads can extend
stopping distance by a sig-
nificant margin.
Apply the brakes in good time.
Tyres
New tyres have a smooth sur-
face. This must be roughened by
riding in a restrained manner at
various heel angles until the tyres
are run in. This running in pro-
cedure is essential if the tyres are
to achieve maximum grip.
Tyres do not have their full
grip when new and there
is a risk of accidents at extreme
angles of heel.
Avoid extreme angles of heel.
Off-roading
For off-roading
with topcase
OA
Topcase and off-roading
If you intend off-roading, it is ad-
visable either to remove the top-
case or secure it with the Enduro
attachment kit available from
your authorised BMW Motorrad
dealer.
Rims
This motorcycle is a tour-
ing Enduro machine, which
means it can also be used for
light off-roading on unsurfaced
tracks. Severe off-roading could,
however, result in damage to the
standard cast-aluminium wheels.
Use the cross-spoked wheels
available as optional extras for
severe off-roading.
After off-roading
BMW Motorrad recommends
checking the following after riding
the motorcycle off-road:
Tyre pressure
Tyre pressures reduced for
off-road riding impair the
motorcycle's handling character-
istics on surfaced roads and can
lead to accidents.
Always check that the tyre pres-
sures are correct.
5
72
z Riding