Technical data

Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Seat the rear wheel on the
rear-wheel adapter.
Install screws 3 and tighten to
the specified tightening torque.
Rear wheel to wheel car-
rier
Tightening sequence: Tight-
en in diagonally opposite se-
quence
60 Nm
Turn the silencer to its initial
position.
If the gap between the rear
wheel and the silencer is
too small, the rear wheel can
overheat.
The gap between the rear wheel
and the silencer must be at least
20 mm.
Install screw 2 for the brack-
et of the silencer in the rear
footrest, but do not tighten it at
this point.
8
122
z Maintenance