Technical data

Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
When the engine is not
running you can switch on
the lights by switching on the ig-
nition and either switching on the
high-beam headlight or operating
the headlight flasher.
High-beam headlight and
headlight flasher
Press the top section of full-
beam headlight switch 1.
High-beam headlight switched
on.
Move full-beam headlight
switch 1 to the centre position.
High-beam headlight switched
off.
Press the bottom section of
full-beam headlight switch 1.
The high-beam headlight is
switched on until you release
the button (headlight flasher).
Switching on parking
lights
Switch off the ignition.
Immediately after switching
off the ignition, press and hold
down button 1 for the left turn
indicators.
Parking light switches on.
Switching off parking
lights
Switch the ignition on and then
off again.
Parking lights switched off.
4
56
z Operation