Technical data

If you want a harder damping
characteristic, use a screw-
driver to turn adjusting screw 1
in the direction indicated by the
H arrow.
If you want a softer damping
characteristic, use a screw-
driver to turn adjusting screw 1
in the direction indicated by the
S arrow.
Basic setting of rear-sus-
pension damping charac-
teristic
Turn the adjusting screw as
far as it will go in the direc-
tion indicated by the H ar-
row, then back it off 3/4 of a
turn in the direction indicated
by the S arrow. (Full load of
fuel, with rider 85 kg)
Electronic Suspension
Adjustment ESA
OE
Settings
Electronic Suspension Adjust-
ment ESA provides a convenient
way of adapting the motorcycle
to different conditions.
The damping characteristic is
shown in panel 1 of the multi-
function display, and spring pre-
load in panel 2. The clock is not
shown while the ESA readout is
active.
Three spring-preload stages can
be combined with three damping
characteristics to fine-tune the
motorcycle's suspension to the
load it carries and the surface
over which you want to ride.
Calling up settings
Switch on the ignition.
4
69
z Operation