Contents A to Z Owner’s Manual for the vehicle. With a quick reference guide for your convenience. Online Edition for Part No.
Online Edition for Part No.
740i 740iL 750iL Online Edition for Part No.
Online Edition for Part No.
Congratulations, and thank you for choosing a BMW. Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. We therefore have this request: Please take the time to read this Owner's Manual and familiarize yourself with the information that we have compiled for you before starting off in your new car.
4n Notes on the Owner's Manual Symbols used The individual vehicle We have made every effort to ensure that you are able to find what you need in this Owner's Manual as quickly as possible. The fastest way to find certain topics is by using the detailed index at the end. If you desire an initial overview of your vehicle, this can be found in the first chapter.
5n Status at time of printing BMW pursues a policy of continuous, ongoing development that is conceived to ensure that our vehicles continue to embody the highest quality and safety standards combined with advanced, state-of-the-art technology. For this reason, it is possible that the features described in this Owner's Manual could differ from those on your vehicle. Nor can errors and omissions be entirely ruled out.
6n For your own safety Important safety information! For your own safety, use genuine parts and accessories approved by BMW. Installation and operation of non-BMW approved accessories such as alarms, Use unleaded gasoline only. Fuels radios, amplifiers, radar detectors, containing up to 10% ethanol or wheels, suspension components, brake other oxygenates with up to 2.8% oxy- When you purchase accessories tested dust shields, telephones (including opgen by weight (i.e.
7n The following only applies to vehicles owned and operated in the US. REPORTING SAFETY DEFECTS If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying BMW of North America, Inc., P.O. Box 1227, Westwood, New Jersey 07675-1227, Telephone (201) 307-4000.
8n Online Edition for Part No.
Operation, care and maintenance Controls Controls and features Car care Overview Overview 9n Advanced technology Technology Repairs Owner service procedures Data Technical Data Index Index Online Edition for Part No.
Cockpit 16 Instrument cluster 18 Indicator and warning lamps 20 Multifunction steering wheel (MFL) 23 Hazard warning flashers 25 Warning triangle 25 First-aid kit 25 Refueling 26 Fuel specifications 27 Tire inflation pressure 28 Controls and features Overview Contents Locks and security systems: Keys 32 Electronic vehicle immobilizer 33 Central locking system 34 Opening and closing – from the outside 34 Using the key 34 Using the remote control 35 Opening and closing – from the inside 38 Luggage compartm
Technology for safety and convenience: Park Distance Control (PDC) 94 Automatic Stability Control plus Traction (ASC+T)/Dynamic Stability Control (DSC) 96 Electronic Damper Control (EDC) 97 Tire Pressure Control (RDC) 98 Lamps: Parking lamps/Low beams 100 Instrument panel lighting 100 High beams/Parking lamps 101 Fog lamps 101 Interior lamps 102 Reading lamps 102 Controlling the climate for pleasant driving: Automatic climate control 104 Rear passenger-area air conditioning 109 Seat heating 110 Steering whe
Care and maintenance: The BMW Maintenance System 154 Caring for your car 155 Airbags 161 Vehicle storage 161 Replacement procedures: Onboard tool kit 166 Windshield wiper blades 166 Lamps and bulbs 167 Changing tires 173 Battery 176 Fuses 180 In case of electrical malfunction: Fuel filler door 182 Sliding/Tilt sunroof 182 Assistance, giving and receiving: Jump-starting 183 Towing the vehicle 184 Advanced technology Under the hood: Hood 143 Engine compartment 144 Washer fluids 148 Washer nozzles 148 Engin
Engine specifications 198 Dimensions 199 Weights 200 Capacities 201 Electrical system 202 Drive belts 202 Index Technical data 13n Everything from A to Z 206 Owner service procedures 212 Online Edition for Part No.
14n Online Edition for Part No.
Operation, care and maintenance Controls Controls and features Car care Overview Advanced technology Technology Repairs Owner service procedures Data Technical Data Index Index Cockpit 16 Instrument cluster 18 Indicator and warning lamps 20 Multifunction steering wheel (MFL) 23 Hazard warning flashers 25 Warning triangle 25 First-aid kit 25 Refueling 26 Fuel specifications 27 Tire inflation pressure 28 Overview 15n Overview Online Edition for Part No.
380de675 16nCockpit Online Edition for Part No.
Cockpit 17n 3 Horn: The entire surface 4 Fog lamps 101 Controls 2 > Turn signal 71 > Parking lamp 101 > High beams 101 > Headlamp flasher 71 > Onboard computer 88 Overview 1 Parking lamps/Low beams 100 9 Electric steering wheel adjustment 51 10 Parking brake release handle 65 11 Parking brake pedal 65 Technology Repairs 8 Rear window defroster 74 Data 7 Hazard warning system 25 Index 6 Central locking system 34 Car care 5 Wiper/Washer lever 72 Online Edition for Part No.
cluster 380us702 18nInstrument Online Edition for Part No.
Instrument cluster 13 Check Control display 79 14 Odometer 76 6 Engine coolant temperature gauge 78 15 Service Interval Display 78, 154 7 Indicator and warning lamps for > Parking brake 21 > Hydraulic brake system/Dynamic Brake Control (DBC)* 20, 21 > Antilock Brake System (ABS) 21 > Airbag 21 > Please fasten safety belts 21 > Cruise control 22 17 Indicator and warning lamps (clockwise) for > Fog lamps 22 > Battery charge current 20 > Engine oil pressure 20 > Service Engine Soon 21 8 CHECK button 79 9
20nIndicator and warning lamps Technology that monitors itself Red: Stop immediately Many of the systems of your BMW monitor themselves automatically, both during engine starts and while you are driving. Indicator and warning lamps that are identified by "●" are tested for proper functioning whenever the ignition key is turned. They each light up once for different periods of time. Battery charge current ● The battery is no longer being charged.
Indicator and warning lamps Airbags ● Please have the system checked by your authorized BMW center as soon as possible. For additional information: Refer to page 57. ABS warning lamp for Canadian models. Automatic Stability Control plus Traction (ASC+T)/Dynamic Stability Control (DSC) ● The ASC+T/DSC has been switched off or has been deactivated because of a malfunction. In the event of a malfunction, have the system checked by your BMW center. For additional information: Refer to page 96.
22nIndicator and warning lamps Green: For your information Blue: For your information Turn signal High beams Flashes when the turn signal is Lights up when the high beams in operation. Rapid flashing indiare on or the headlamp flasher cates a system malfunction. is actuated. For additional information: Refer to For additional information: Refer to page 71. page 71. Cruise control Lights up when the cruise control is activated. Available for operation via the multi-function steering wheel.
Multifunction steering wheel (MFL) 23n The illustration shows the maximum possible number of controls, corresponding to a full range of optional equipment. Refer to the individual Owner's Manuals for more detailed descriptions of the equipment. 2 Radio/Telephone: Selection 3 Radio/Telephone: Search backward or station keys or scroll in the phone book.
24nMultifunction steering wheel (MFL)* The controls integrated in the multifunction steering wheel are provided so that you can operate a number of accessories quickly and without being distracted from traffic conditions. You may operate: 39mde058 There are two design versions, depending on the equipment installed in your vehicle.
Warning triangle* First-aid kit 25n Controls Car care 380de086 Some of the articles in the first-aid kit may be used within a limited time only. For this reason, check the expiration dates of each of the items regularly, and replace any whose expiration dates have passed. You can acquire replacements in any drugstore or pharmacy. Comply with legal requirements which cover availability of a firstaid kit in the car.
Fuel filler door Before filling the tank, shut off the engine. If you do not, fuel cannot flow into the tank and the "Service Engine Soon" warning lamp may come on, refer to page 21.< To open, press against the forward edge. To unlock the fuel filler door if the central locking system malfunctions, refer to page 182. When handling fuels, comply with all of the applicable safety precautions and regulations posted at the filling station. Never carry spare fuel containers in your vehicle.
Close the fuel cap carefully after refueling. A loose or missing cap will activate the "Service Engine Soon" lamp.< lower fuel consumption, while the use of fuels with lower octane ratings will have the opposite effect. Do not use leaded fuels. The use of leaded fuels will cause permanent damage to the system's oxygen sensor and the catalytic convertor.< AKI = Anti Knock Index Overview Controls Car care Tank capacity: Refer to page 201.
inflation pressure 460de163 28nTire The inflation pressures are indicated on a sticker attached to the B-pillar behind the driver's door (visible with door open). Check tire inflation pressures regularly – at least every two weeks and before beginning a longer trip. Incorrect tire pressure can otherwise lead to tire damage and accidents. Also check the inflation pressure of the spare tire. Inflate the spare tire to the highest inflation of any tire on your vehicle.
Tire inflation pressure 29n Controls outside of the US/Canada: 29 (200) 33 (230) 33 (230) 41 (280) Car care 41 (280) Technology Repairs 33 (230) Data US/Canada: 33 (230) 41 (280) Index 235/60 R 16 100 H M + S 235/60 R 16 100 W 245/55 R 16 100 W 235/50 ZR 18 Rear: 255/45 ZR 18 215/65 R 16 98 Q M + S 235/60 R 16 100 Q M + S 245/55 R 16 100 Q M + S Overview Tires Tire inflation pressures in psi (kilopascal) Online Edition for Part No.
oef_schl.fm Seite 30 Dienstag, 20.
oef_schl.fm Seite 31 Dienstag, 20.
oef_schl.fm Seite 32 Dienstag, 20. Juli 1999 3:02 15 32nKeys 463de023 3 Door and ignition key The locks for the luggage compartment lid and the glove compartment cannot be operated with this key – this is recommended for valet parking, for instance. 1 The master keys with remote control determine the functions of the Key Memory. Refer to page 55. There is an extended-life battery in every master key that is charged automatically in the steering lock as you drive.
Overview Controls Car care Your BMW is equipped with a passive Force applied to the key can damanti-theft system. This electronic immoage the integrated electronic cirbilization system is designed to reduce the susceptibility of your vehicle to theft cuitry. A damaged key can no longer be by making it impossible to start the en- used to start the engine.< gine using any means other than the special keys furnished with the vehicle.
34nCentral locking system Opening and closing – from the outside Convenience operating mode The central locking system is ready for operation as soon as you close the driver's door. The system engages and releases the locks on the You can also operate the windows and the sliding/tilt sunroof via the driver's door lock. > doors > luggage compartment lid > fuel filler door.
The anti-theft system is also deactivated/activated simultaneously with the unlocking or locking of the vehicle, and the alarm system is disarmed/armed. When the vehicle is unlocked, the interior lamps and the exterior door handle illumination are switched on. You can have an acknowledgment signal set to confirm that the vehicle is correctly closed (not released at this time).< Keys with remote control are master keys. Refer to page 32.
Unlocking and convenience opening mode To release: Press button 1. Press the button once to unlock the driver's door only; press a second time to unlock all remaining doors as well as the luggage compartment and fuel filler door. Convenience opening mode: Press and hold button 1. The windows and the sliding/tilt sunroof are opened. To lock Press button 2.
The luggage compartment lid will open slightly, regardless of whether it was previously locked or unlocked. Before beginning a trip, be sure that the luggage compartment lid was not opened unintentionally.< Panic Mode By pressing and holding button 3 for 2 to 5 seconds, you can trigger the alarm system if there is an impending danger if the system has been armed. The alarm is deactivated by pressing button 1.
38nOpening and closing – from the inside 380de016 If only the driver's door was unlocked from the outside and you press the button Use this button to operate the central locking system when the front doors are closed. With this button, only the doors and luggage compartment lid are unlocked or locked. The antitheft system is not activated. The fuel filler door also remains unlocked to allow refueling. If you desire, the central locking system will secure the locks as soon as you start to drive.
Luggage compartment lid (in the event of electrical failure) Opening separately Turn the master key to the left in the luggage compartment lid lock to the stop – the luggage compartment lid will open slightly. The luggage compartment is locked again as soon as you close the lid. This locks the luggage compartment lid and disconnects it from the central locking system.
40nLuggage compartment lid Automatic Soft-Close feature 380de128 380de018 To close the luggage compartment lid, merely press it down gently. The closing process will then be carried out automatically. Opening from the inside Closing If the luggage compartment lid has not been locked separately, you can open it with this button when the vehicle is stationary. The handle recess in the interior trim panel of the luggage compartment lid (arrow) makes it easier to pull the lid down.
Luggage compartment To secure your luggage, you may either hook nets > into the lashing eyes on the front corners and rear wall of the luggage compartment or > into the rear wall of the luggage comLashing eyes located at the front corpartment and the mounting points ners and the rear wall of the luggage under the rear parcel tray. compartment provide you with a convenient means of attaching draw straps to secure luggage. Movement is reduced, when objects are placed on the straps.
system The concept The vehicle alarm system responds: > When a door, the hood or the luggage compartment lid is opened > To movement inside the vehicle (interior motion sensor) > To variations in the vehicle tilt sensor such as occur during attempts to steal the wheels or tow the vehicle > To interruption of battery voltage.
Alarm system Following triggering of an alarm, the indicator lamp will flash continuously. 1 Use the key to unlock the door (the alarm sounds for 30 seconds when opening the door) 2 Turn the key to ignition key position 1; the central locking system unlocks the remaining doors. In order for the interior motion sensor to function properly, the windows and sliding/tilt sunroof must be completely closed.
44nElectric power windows After the ignition has been switched off: 380us651 > You can continue to operate the power windows as long as one of the front doors has not been opened. To open a window, press the rocker switch past the resistance point. Remove the ignition key when you leave the vehicle and close the doors so that children can no longer operate the power windows, possibly injuring themselves, for instance.
Security glass* Press the safety switch whenever children are riding in the rear of the vehicle. Careless use of the power windows can lead to injury.< 1 The film is not scratch-resistant. Avoid contact with sharp objects which may break through or cut the film 2 Clean the glass with water. If ineffective, you may use regular household window cleaner; wipe the cleaner off immediately.
sunroof To prevent injuries, exercise care when closing the sliding/tilt sunroof and keep it in your field of vision until it is shut. Before leaving the car, switch off the electric sunroof mechanism by taking out the ignition key. Do not leave children unattended in the vehicle with access to vehicle keys. Use of the key can result in starting of the engine and operation of vehicle systems such as power sunroof, etc. Unsupervised use of these systems can result in serious personal injury.
Sliding/Tilt sunroof Pressing the switch again briefly stops the motion immediately. Overview Controls 1 Raise the sliding/tilt sunroof all the way 2 Continue to hold the switch for approx. five seconds. In the event of an electrical system malfunction, the sliding/tilt sunroof can be manually operated. Refer to page 182. Car care The headliner insert slides back somewhat when you raise the roof. When the roof is opened, the headliner retracts with it.
48nSeat adjustment Electric power seats Correct sitting posture Never try to adjust your seat while operating the vehicle. The seat could respond with unexpected movement, and the ensuing loss of vehicle control could lead to an accident. Wear the safety belt firmly against your body at all times. In the event of a frontal impact, a loose lap belt could slide over your hips, leading to abdominal injury. In addition, the safety belt's restraint effectiveness is reduced if the belt is worn loosely.
BMW comfort seat* 49n 2 Shoulder support Lumbar support You can adjust the backrest's contour for additional support in the curvature of your spine's lumbar region. Controls Press the rocker switch: The support angle of the upper backrest section is adjusted. To obtain an optimal seating posture, The upper hips and spinal column rewe recommend: ceive supplementary support to help you maintain a relaxed, upright posture.
comfort seat* Front passenger's seat adjusted for relaxed traveling: 1 Adjust the upper backrest section to its extreme rear position 2 Increase the seat cushion tilt 3 Tilt the backrest more 4 Bring the upper backrest section forward. Make corrections in the forwardbackward adjustment of the seat to ensure that the safety belt still fits firmly against your body. If you do not do this, the protection provided by the safety belt may be reduced.
Adjusting the steering wheel 3 Lumbar support The head restraint extends automatically whenever a passenger fastens the Do not adjust the steering wheel safety belt at one of the rear seating powhile the vehicle is moving. There sitions. is a risk of accident from unexpected movement.< Correct head restraint height with switch 2. To store the steering wheel setting, reFor information on the lumbar support, fer to "Seat, mirror and steering wheel refer to the BMW comfort seat on memory" on page 53.
Exterior mirrors 1 Switch for 4-way adjustment 2 Left/right selection switch You can also adjust the mirrors manually by pressing against the outer edges of their lenses. To store the mirror angles: Refer to "Seat, mirror and steering wheel memory" on page 53. The mirror on the passenger's side features a lens with a more convex surface than the mirror installed on the driver's side.
1 Open driver's door after unlocking or ignition key in position 1 2 Briefly press memory button 1, 2 or 3 as desired. Movement stops immediately when one of the seat-adjustment or memory buttons is activated during the adjustment process. Security function: Fold down the sun visor and slide the cover panel to the side as required. The mirror lamps operate in ignition key positions 1 and 2. Sun visors These can be folded down toward the windshield or swiveled out against the side windows.
54nSeat, mirror and steering wheel memory If you make use of this setting mode, be sure that the footwell behind the driver's seat is unobstructed before unlocking the vehicle. If you fail to do so, persons or objects could be injured or damaged if the seat should move backward.
Car Memory, Key Memory There are settings related to the vehicle ("Car Memory") and settings related to individuals ("Key Memory"). You can have two different basic settings adjusted for two different persons. The only requirement is that each person uses his or her own remote control key. You will see this symbol throughout the Owner's Manual. It is to remind you at appropriate places of the settings that are available to you.
belts 380de033 56nSafety Fasten your safety belt before starting off. To fasten: Make sure you hear the catch engage in the belt buckle. To release: Press the red button in the buckle. Hold the belt and guide it back into its reel. The shoulder belt anchor automatically adjusts to continue providing an optimum fit when you move the seat forward or back. The two safety belt buckles which are integrated in the rear seat are for passengers sitting on the left and right.
Protective effect The front airbags supplement the threepoint safety belts by helping to provide additional protection for the front-seat occupants in the event of a severe frontal collision in which the protection afforded by the belts alone may no longer be sufficient. The head protection and side airbags help provide protection in the event of a severe collision from the side. Each of the side airbags is designed to help support the upper body.
58nAirbags Indicator lamp Sitting correctly with airbags Never allow any objects to obstruct the area between the airbag and an occuFor your safety, comply with the pant. following instructions for the airDo not use the cover panel above the bags. If you do not, the airbags may not passenger-side airbag as a storage be able to provide their maximum proarea. System operational: tection.
Airbags For additional information concerning the airbag system, refer to page 161 and 188. Overview Controls Car care Airbag warning information is also provided on the sun visors. Technology Repairs The rear seat side airbags may already have been deactivated, either at the time of manufacture or by a BMW center. Labels in the rear door opening should indicate the status of your rear seat side airbags.
60nAirbags Child restraints All occupants – especially children – should be restrained whenever riding in cars. This is the right way a child should sit in a child restraint when rear side bags (arrow) are installed. 380de638 380de637 Infants or small children should never be held on the lap of a passenger. This is the right way a larger child should sit wearing the safety belt when rear side airbags (arrow) are installed.
Child restraints Overview Controls Car care Data All rear seating positions in your vehicle meet the recommendations of SAE J1819, an industry recommended practice for securing child restraint systems in motor vehicles. Technology Repairs Never install a rear-facing child restraint system in the front passenger seat. We strongly urge you to carefully read and observe the instructions for installation and use provided by the child restraint's manufacturer whenever you use such a device.
62nChild restraint installation Child-safety locks Unlock the safety belt To allow you to use the safety belts to secure child-restraint systems, the belts at all rear positions feature a special locking mode. 380de019 365us146 Release the safety belt, remove the child's seat and retract the safety belt to its end position on the belt retractor. Insert the key into a rear door lock and turn it outward: The door can now be opened from the outside only.
Steering/Ignition lock An acoustic warning sounds when you fail to remove the ignition key before opening the driver's door. After removing the key, turn the steering wheel slightly to the left or right until you hear the lock engage. You will find that it is often easier to turn the ignition key from position 0 to position 1 when you move the steering wheel slightly to help disengage the lock. Individual electrical equipment and accessories are available for use.
64nStarting the engine Before starting > Press the parking brake pedal > Place the selector lever of the automatic transmission in P or N. Do not allow the engine to run in enclosed spaces. The exhaust gases contain carbon monoxide, an odorless and colorless, but highly toxic gas. Breathing the exhaust gases poses an extreme health risk, and can lead to unconsciousness and death. Never leave the car unattended with the engine running, as such a vehicle represents a potential safety hazard.
Switching off the engine Parking brake 65n Car care Controls You can prevent corrosion from forming on the separate parking brake drums with an occasional gentle application of the parking brake when stopping at traffic lights. Technology Repairs The parking brake is primarily designed to prevent the vehicle from rolling while parked, and operates against the rear wheels. Data Depress the pedal.
380us046 transmission 380us045 66nAutomatic Selector lever positions PRND432 Shift programs Lever positions: > A (Adaptive/Economy) > M (Manual) Selector lever in position 4: > S (Sport program) For an explanation of the programs, refer to the next page. Starting engine The engine can only be started in positions "Park" or "Neutral." Changing the selector lever position A detent prevents inadvertent shifts into some selector lever positions.
Automatic transmission "Kickdown" In the "Kickdown" mode, you achieve maximum engine performance. Press the accelerator pedal past the increased resistance point at the fullthrottle position. Shift programs The automatic transmission of your BMW is equipped with the Adaptive Transmission Control (ATC) as standard equipment. For details concerning ATC, please refer to the chapter titled "Advanced Technology" on page 188.
68nAutomatic transmission Special functions Control of the winter program In program A, the Adaptive Transmission Control influences several special functions in the selection of the drive gear. A winter program is automatically selected when the vehicle is operated on slippery road surfaces (snow and ice). When this program is active, the transmission starts in 2nd gear and shifts into the higher gears earlier.
Automatic transmission with Steptronic* 69n Controls A detent prevents inadvertent shifts into some selector lever positions. To release the shift-lock mechanism, press Starting the engine The engine can only be started in selec- the button on the front of the selector tor lever positions P ("Park") or N ("Neu- handle (arrow). tral").
transmission with Steptronic* Before exiting the vehicle when the engine is running, place the selector lever in the "Park" or "Neutral" position and apply the parking brake. If you do not, the vehicle can move. Do not leave the car unattended with the engine running. An unattended vehicle with a running engine represents a potential safety hazard.< P – Park Select "Park" only when the vehicle is stationary. The transmission locks to prevent the rear wheels from turning.
In the following situations, the Steptronic "thinks" for you in the manual mode: > In order to prevent engine overspeeding, the transmission shifts automatically to the next higher gear shortly before the RPM cutoff point > At low speeds, the transmission shifts down automatically - you do not have to act > In the kickdown mode, the transmission shifts down to the lowest possible gear based on the engine speed > Depending on the situation – when driving in adverse winter conditions, for example – you may al
72nWiper/Washer system/Rain sensor 0 Wipers retracted 1 Intermittent wipe or rain sensor * 2 Normal wipe 3 Fast wipe 4 Brief wipe 5 Automatic windshield washer 6 Rotary dial for control of the interval time or the sensitivity of the rain sensor The wipers are partially hidden behind the hood.
Wiper/Washer system/Rain sensor If the headlamps are on, they will also be cleaned every fifth time you activate the automatic windshield washer. To activate the rain sensor: From ignition key position 1 and up, move the lever to position 1. The wipers travel once across the windshield, regardless of the weather. 3 Fast wiper speed To modify the sensitivity of the rain sensor: Turn rotary dial 6. Turn the rain sensor off in automatic car washes.
74nRear window defroster Cruise control To store and maintain speed or to accelerate To activate Press the button: The rear window defroster continues high-output operation for as long as the indicator lamp remains on (rapid thaw). After the indicator lamp goes out, the defroster continues operating at reduced power for a limited period before deactivating automatically. 390de058 380de622 Press button 1 briefly: The system records and maintains the current vehicle speed.
Cruise control To interrupt the cruise control When the system is activated, press button 4. The indicator lamp stays on. You can use the cruise control again as desired. In addition, cruise control is canceled automatically: > When you apply pressure to the brake pedal > If the automatic transmission selector lever is moved from "D" to "N" > If you exceed or fall below the programmed speed for an extended period (by depressing the accelerator, for example).
76nOdometer, outside temperature display Tachometer 3 Outside temperature display The outside temperature appears in the display panel as soon as you turn the ignition key to position 1. 1 pressing and holding down the button (arrow) with the ignition key in position 1 2 while turning the ignition key to 0. 1 Odometer Ice warning You can activate the displays shown in the illustration with the ignition key in position 0 by pressing the button in the instrument cluster (arrow).
Fuel gauge 77n > BMW 740i/L 2.6 gallons (10 liters) When the vehicle is stationary, the dis- > BMW 750iL 3.2 gallons (12 liters) play goes to "Maximum" (zero on Canaremaining in the tank. dian models). Tank capacity: Refer to page 201. Certain operating conditions (such as those encountered in mountainous areas) may cause the needle to fluctuate slightly. Controls Car care Technology Repairs If the indicator lamp stays on, there are approx.
78nTemperature gauge Service Interval Display Between the blue and red zones Checking coolant level: Refer to page 151. 380us008 380de007 Normal operating range. It is not unusual for the needle to rise as far as the edge of the red zone in response to high outside temperatures or severe operating conditions. Blue Green lamps The engine is still cold. Drive at moderate engine and vehicle speeds. The number of illuminated lamps decreases as the time for your next maintenance visit approaches.
Check Control 2 Status report symbol 3 Display Messages concerning system faults are differentiated based on two priorities: > RELEASE PARKING BRAKE This message appears together with an acoustic signal any time you begin to drive and the parking brake is applied. > COOLANT TEMPERATURE Coolant overheated. Stop the vehicle and switch off the engine immediately. Refer to pages 78, 151. Overview Controls Car care These defects are immediately indicated by a gong and a flashing warning symbol (2).
80nCheck Control Priority 2 These alerts for problems are reported for 20 seconds when the ignition key is in position 2. The status reports remain after the message disappears. You can view the message again by pressing the CHECK button (1). > TRUNK LID OPEN This message is given only when initially starting off. > DOOR OPEN This is displayed after a minimum vehicle speed is exceeded. > FASTEN SEAT BELTS* In addition, the indicator lamp with the safety belt symbol appears and an acoustic signal is heard.
Check Control In this case, there are no faults in the > LIGHTS ON systems which are monitored. > KEY IN IGNITION LOCK > CHECK ENGINE OIL LEV Add engine oil at the next opportunity (next stop for fuel). Refer to page 149. This message appears when you open the driver's door after parking the vehicle. A supplementary gong is also heard. Even if the ignition key has been removed and the display has gone off, you can still retrieve these messages with CHECK button (1) for approx.
Display (MID) The MID serves as a central control and display unit for the following vehicle systems: > Digital clock (time, date, independent ventilation system) > Sound system (radio, cassette, CD player*) > Onboard computer (such as fuel consumption, cruising range) > Cellular phone* (dialing, for instance) 380us171 82nMulti-Information Implausible numbers are not accepted. Any interruption in power supply will result in the loss of all stored data.
Digital clock 380us173 Press the DATE key with the time activated to display the date. 2 Display for time and date 3 Tone symbol for active memo function 4 Sound system function key 5 Function key for the digital clock and onboard computer 6 Entry and data-request keys for sound system, digital clock and onboard computer 7 Display for entry and data-request keys You can display the time in either a 12- or 24-hour scale.
Programming a reminder signal To reset the time 1 Press the digital clock function key 1 Press the digital clock function key 2 Press MEMO ON/OFF to activate/de- 2 Press the SET key; the dots in the activate the hourly signal. display start to flash When MEMO ON is active, a tone sym- 3 Enter the correct time with the – HRS + and – MIN + input keys bol appears in the display and an acoustic signal is provided 15 seconds 4 Confirm your entry by pressing the SET key. before each full hour.
Digital clock 85n Overview To enter the time and date after a power loss 1 Press the digital clock function key Car care Controls You can preselect two different activation times for the independent ventilation system. The system switches off automatically after 30 minutes. Refer to page 111 for important information on using the independent ventilation system. Technology Repairs To enter activation times Data Leap years are programmed into the system and therefore need not be taken into account.
clock 380us184 86nDigital To enter the second activation time Activating/Deactivating switch-on times The procedure is the same as that for setting the first activation time, except you will press TIMER 2 for your selection. After pressing the digital-clock function key, the entered activation times can be activated and deactivated by pressing the keys TIMER 1 or TIMER 2.
Digital clock 87n Press the keys (AIR ON/AIR OFF) in the sequence shown in the illustration. Car care Technology Repairs Available only with ignition key at position 1. Data Direct control Index When a preselected activation time is set, the independent ventilation system is operational at outside temperatures above 60 7 (166), or by direct switch activation. It cannot be switched on when the vehicle is moving.
88nOnboard computer Standard displays (no previous data entries required) 380us178 Page Two different average fuel consumption calculations 89 RANGE Estimated cruising range 89 Average speed 90 SPEED The onboard computer operates at igni- 1 Sound system display (refer to the Supplementary Operating Instruction key positions 1 and 2. tions) Information for safe and economical 2 Sound system function key driving can be called up for display.
Onboard computer To start calculations for distance 1: Press the keys in the sequence shown in the diagram. To start calculations for distance 2: The procedure is the same as that for the first distance, except you will press CONSUM 2 for your selection. The computer starts calculating fuel consumption as soon as you start driving. Data request: Press the BC key and CONSUM 1 or 2. Data request: Press the keys in the sequence shown in the illustration.
380us187 380us186 computer 380us179 90nOnboard Average speed Distance remaining to destination To enter the distance To start calculations: Press the keys in the sequence shown in the illustration. Data request: Press BC and DIST. Press the keys in the sequence shown in the illustration on the left. Displays the distance to the destination. Available only if the total distance was entered before the start of the journey. The miles flash in the display. Calculations begin after you start off.
Onboard computer Use the CLR key to make corrections. Press once to delete the final digit. Estimated time of arrival Speed warning threshold (Limit) To deactivate the speed warning Data request: Press the keys in the sequence shown in the illustration. Entry of a speed warning threshold (Limit) will be indicated by the word LIMIT at the right in the display. > Press BC and then press LIMIT twice. Shows the estimated arrival time based on current driving speed.
92nOnboard computer To cancel with the ignition key at position 1 or 2 Code You can program a code into the onboard computer for supplementary protection against unauthorized attempts to start the engine or tamper with the vehicle. This feature provides you with an extra measure of security extending beyond that furnished by the vehicle immobilization system (refer to page 33). The system prevents the engine from starting. 380us688 380us687 A gong and the "CODE – – – –" display prompt the code entry.
Onboard computer 93n To enter: 1 Press the control in the turn signal lever until "Prog 1" appears in the display 2 Press the buttons on the MID in the sequence in which you want the information to be displayed. The program number is counted in the display every time information is stored 3 Press the SET key. Controls Car care Technology Repairs You can display all information for the onboard computer and digital clock with the switch in the turn signal lever.
Distance Control (PDC)* 380de619 94nPark The PDC assists you when you are parking. Acoustic signals warn you of the distance to an obstacle. In addition, four ultrasonic sensors in each the front and rear bumpers measure the distance from the nearest object. The monitoring range for the four front sensors and that of the two rear corner sensors ends approx. 2 ft (60 cm) beyond the respective bumper. The two center sensors cover a distance of approx. 5 ft (1.50 m).
Overview Controls Car care Technology Repairs Keep the sensors clean and free of ice or snow in order to ensure that they continue to operate effectively. Do not apply high-pressure spray to the sensors for a prolonged period of time. Maintain an adequate distance of more than approx. 4 inches (10 cm).< Data The PDC does not remove the driver's personal responsibility for evaluating the distance between the vehicle and any obstacles.
96nASC+T/DSC These systems help provide additional dynamic stability, particularly when accelerating and cornering. The DSC system enhances the benefits of the ASC+T. In addition to optimizing vehicle stability and traction when accelerating or starting from a standstill, another benefit is realized in cornering stability. Of course, this is subject to the limits imposed by the laws of physics. The system starts up automatically each time you start the engine.
Sport program Press the button again; the indicator lamp goes out. With the ignition key in position 2, press the EDC button (arrow). The indicator lamp next to the S comes on. The laws of physics cannot be repealed, even with DSC. An appropriate driving style always remains the responsibility of the driver. We therefore urge you to avoid using the additional safety margin of the system as an excuse for taking risks.
98nTire Pressure Control (RDC)* Loss of tire pressure RDC monitors the tire pressures at all four wheels, even when the vehicle is moving. The system provides an alert whenever the inflation pressure drops significantly below the specified pressure in one or more tires. If, after a certain period of time, the air pressure has gone down significantly (which is normal for any tire), the message "CHECK TIRE PRESSURE" appears in the Check Control.
Tire Pressure Control (RDC)* Overview During the period of the malfunction, the message "TIRE CONTROL INACTIVE" appears in the Check Control. > in the event of a system fault > if a wheel is mounted without the RDC electronics > if, in addition to the spare tire, additional wheels with RDC electronics are on board. Please contact your BMW center for additional information.
100nParking lamps/Low beams Instrument panel lighting Parking lamps With the switch in this position, vehicle lighting is illuminated on both sides. For lighting on one side for parking: Refer to page 101. "LIGHTS ON" warning In ignition key position 0, a message appears in the Check Control after the driver's door is opened if the headlamps have not been switched off .
Fog lamps 101n Controls A green indicator lamp appears in the instrument cluster to indicate that the front fog lamps 2 Headlamp flasher (blue indicator lamp) With the ignition key in position 0, engage the lever in the appropriate turnsignal position. The lever engages in the turn signal position. If the high beam is switched on, the fog lamps go out. Data Parking lamp, left or right* are on.
102nInterior lamps Reading lamps Footwell lamps The interior lamps operate automatically. Switching interior lamps on and off manually Press the button (arrow). If you want the interior lamps to remain off continuously, maintain pressure on the button for approximately 3 seconds. 380de710 380de709 The footwell lamps operate in the same way as the interior lamps. The reading lamps are located in the front near the interior lamp and in the rear.
Index Data Technology Repairs Car care Controls Overview 103n Online Edition for Part No.
climate control 380us685 104nAutomatic Online Edition for Part No.
Automatic climate control 2 Air flow toward the upper body The rotary dials allow infinitely-variable regulation of the air supply, changes in the air-flow direction, and temperature regulation. (Change air-flow direction in the rear passenger area with the levers in the center of the vent.
106nAutomatic climate control Tips for pleasant driving Automatic air distribution Use the automatic system, i.e., press AUTO button 4. Select an interior temperature that is comfortable for you – we recommend 727 (226) as a comfortable setting. When the outside temperature is above 417 (56), you can also use the air conditioning system 14. This will dry the air and prevent window fogging, for example if people are wearing damp clothes in the vehicle.
Automatic climate control Automatic recirculated-air control Rear window defroster (AUC) You can respond to unpleasant external odors by temporarily stopping the flow of outside air. The system then recirculates the air currently within the vehicle.
108nAutomatic climate control Residual heat mode Rotary dial 3 allows you to temper the air flow from these outlets by adding heat or cooling as desired: The heat which is stored in the engine is utilized for heating the interior when the engine has been switched off (while waiting at a railroad crossing, for instance). This function may be activated when the outside temperature is below approx. 59 7 (156), the engine is at operating temperature, and the battery is adequately charged.
3 Air supply Data When you press "–" in the lowest blower speed, all of the displays are canceled: This setting deactivates the blower and shuts off the air supply. You can then switch the rear air conditioner back on by pressing the button again. The air flow in the rear will vary according to the settings selected at the front.
110nSeat heating* Steering wheel heating* Rear seat heating* 390de630 380de618 The switches are located at the rear of the center console, beneath the air vents. The seat cushion and backrest can be heated with the ignition key in position 2. To activate and cancel the steering wheel heater, press the button (arrow) with the ignition key in position 2. You can call up different heating modes by repeatedly pressing the keys.
Roller sun blinds for the rear side windows* Use the strap to extract the blinds, then suspend them in the attachment provided. When a preselected activation time is set, the independent ventilation system is operational at outside temperatures above 607 (166), or by direct switch activation. It cannot be switched on when the vehicle is moving. The air emerges via the vent outlets for the upper body. Therefore, the vents must be open for the system to operate.
112nBMW Universal Transmitter* The concept The BMW Universal Transmitter replaces up to three hand-held transmitters of different devices such as garage-door openers, alarm systems, or door locking systems. The BMW Universal Transmitter recognizes and "learns" the transmitted signal of each of the original hand-held transmitters. The signal of an original hand-held transmitter can be programmed on one of the three channel keys.
1 Channel keys 2 Indicator lamp 3 Receiver for programming Read and comply with the safety precautions on page 112.< 1 Ignition key position 2 2 For initial use: Press and hold both outside keys 1 until the indicator lamp 2 flashes, and then release them.
114nBMW Universal Transmitter* 1 Program the BMW Universal Transmitter as described previously under "Programming" 2 Press and hold the programming key on the receiver of the device for approximately two seconds until the programming light on the device comes on 3 Press the desired channel key of the BMW Universal Transmitter three times. If you have additional questions, please consult your BMW center or call 1-800-355-3515.
Center armrests 115n Overview To lock Rechargeable flashlight It is also possible to swivel out the glove compartment after opening for improved driver access. To close Push the lid up after repositioning. Located on the left-hand side of the glove compartment. Features integral overload-protection, so it can be left in its holder continuously. Be sure that the flashlight is switched off when it is inserted into its holder. Failure to comply with this precaution could lead to overcharging and damage.
116nCenter armrests 2 Actuation of the power rear window blind 3 Front passenger side shoulder support 5 Seat memory for the front passenger 380de223 380us201 4 Power adjustment, front passenger's seat Multifunction armrest, rear* Front armrest In order to operate certain functions from the rear seat, corresponding controls are integrated into the center armrest. Press the button at the front for front/ rear adjustment (arrow 1). Fold out the armrest and open the cover. Refer to "Rear armrest.
Cup holders Cellular phone* 117n Overview Front storage compartment on slanted surface of center console: To open, press the recess at the top, press to close. Controls Handsfree system On vehicles that are wired for a telephone*, the cover for the handsfree speaker is located in the headliner near the interior lamp. You will find additional storage compartments in all of the doors as well as on the backrests of the front seats.
380de063 380de062 380de061 118nAshtray To open To empty Rear Press gently on the recess (arrow). Press button (arrow 1): You can now pull the ashtray upward for removal. To open: Press the recess at the top. To extinguish a cigarette, tap off the ash and gently press the tip into the funnel. To empty: Pull the ashtray out. Online Edition for Part No.
Cigarette lighter for rear passengers At the rear of the center console. Hold or touch the hot cigarette lighter by the knob only. Holding or touching it in other areas could result in burns. The cigarette lighter remains operational when the ignition key has been removed. For this reason, children should never be left in the car unattended.< On vehicles with the nonsmoker's equipment package, the socket is concealed by a cover panel. For access to the socket: Lift the cover panel off.
120nSki bag* 380de068 The supplementary length provided by the ski bag in combination with the space in the luggage compartment makes it possible to transport skis of up to 6.8 ft (2.10 m) in length. Because of the tapered shape of the ski bag, it can only accommodate two pairs of skis with a length of 6.8 ft (2.10 m). 380de067 Designed for safe, convenient transport of 3 to 4 pairs of skis. Lower the center armrest Loading Fold the center armrest completely out.
Ski bag* To store the ski bag, perform the above steps in reverse sequence. The center armrest automatically returns to its original position when you fold it back. An unsecured ski bag could lead to loss of vehicle control and to personal injury in the event of an accident.< Controls Car care Please ensure that the skis are clean before loading them into the bag. Take care to avoid damage from sharp edges. Technology Repairs Secure the bag's contents by tightening down the strap with the buckle.
loading 380de613 122nCargo Securing the load > Secure smaller, light pieces with the retaining straps or with a luggage compartment net or elastic straps (refer to page 41) > For large, heavy pieces, see your BMW center for load-securing devices*. Lashing eyes are provided at the corners of the luggage compartment for attaching these load-securing devices (refer to the illustration) > Comply with the information enclosed with the load-securing devices.
Overview Controls Car care The roof load increases aerodynamic resistance: Increased fuel consumption and additional stresses on the vehicle's body result from this. Technology Repairs Drive smoothly: Avoid sudden acceleration and braking maneuvers, corner gently. Data Secure the roof luggage correctly and tightly to prevent it from shifting or being lost during driving (danger to following traffic). 123n Index Roof-mounted luggage rack* Online Edition for Part No.
124n Online Edition for Part No.
Laws and regulations: Technical modifications to the vehicle 162 OBD connector 163 Operation, care and maintenance Controls Car care Controls and features Owner service procedures Advanced technology Technology Repairs Care and maintenance: The BMW Maintenance System 154 Caring for your car 155 Airbags 161 Vehicle storage 161 Overview Technical Data Data Wheels and tires: Tire inflation pressure 136 Tire condition 136 Tire replacement 137 Tire rotation 137 Wheel and tire combinations 139 Winter ti
126nBreak-in procedure To ensure that your vehicle provides maximum economy throughout a long service life, we request that you comply with the following: Engine and differential Up to 1,200 miles (2,000 km): Drive at varying engine speeds and road speeds, but do not exceed 4500 rpm and/or 105 mph (170 km/h) during this initial period. Comply with all local, state and federal maximum speed laws. Refrain from using full throttle and avoid pressing the accelerator beyond the kickdown point.
Driving notes Overview Controls Car care Technology Repairs Data Rear package tray: Never use the rear package tray to store heavy or bulky objects. If you do so, such objects could pose the risk of injury to vehicle occupants during braking or evasive maneuvers, or in a crash. Clothes hooks: When hanging articles of clothing from the hooks, be sure that they will not obstruct the driver's vision. Do not hang heavy objects on the hooks.
128nCatalytic converter The catalytic converter reduces harmful exhaust emissions, and is designed for use with unleaded fuel only. Even minute quantities of lead would be enough to permanently damage both the catalytic converter and the system's oxygen sensor.
Overview On road surfaces that have a loose surface layer on a firm base with good traction (on gravel or snow, for instance), braking distances may be longer than with locked wheels. This is also true if snow chains are mounted. However, ABS continues to provide enhanced vehicle stability and steering response under these conditions. Controls The system becomes operative once the vehicle exceeds a speed of approx. 6 mph (10 km/h).
130nAntilock Brake System (ABS) Information for your safety In the event of a fault Not even ABS can suspend the laws of physics. ABS alone cannot prevent accidents when the brakes are applied without an adequate safety distance between vehicles, if the vehicle is driven with excessive speed, or if aquaplaning occurs. Responsibility for these types of situations remains in the hands (and at the feet) of the driver.
Disc brakes Extended or steep mountain descents do not necessarily have to lead to reduced braking efficiency; downshift to a gear in which only minimal periodic brake applications are required – move the selector lever to the appropriate lower range. You can continue to increase the braking effect of the engine by selecting a lower gear – you can select transmission ranges as low as position 2 for extreme conditions. For "Information for your safety" covering the ABS system, refer to page 129.
132nBrake system Winter operation Brake fluid level Brake pads The warning lamp for the brake hydraulic system comes on or the message "CHECK BRAKE FLUID" appears in the Check Control: The brake fluid level is too low in the reservoir. Refer to page 152. The message "CHECK BRAKE PADS" appears in the Check Control: If the brake fluid level is too low and brake pedal travel has become noticeably longer, there may be a defect in one of the brake system's hydraulic circuits.
Winter operation Snow chains BMW snow chains* can be fitted on both summer and winter tires in response to severe winter road conditions. Mount them in pairs on the rear wheels only, and be sure to comply with the manufacturer's safety instructions. Do not exceed a maximum speed of 30 mph (50 km/h). In this situation (snow chains mounted), deactivate the ASC+T or DSC. Refer to page 96.
134nWinter operation Skid control Release the accelerator pedal. Countersteer carefully and attempt to regain control of the vehicle. Parking Place the selector lever in position P (Park). Engage the parking brake when parking on hills and inclined surfaces. In order to prevent the parking brake linings from locking in the drum due to frost or corrosion, dry them by gently applying the parking brake as the vehicle is coming to a stop. Make sure that following traffic is not endangered.
Before loading the vehicle on a car-carrier train or driving it through a car-wash, remove the antenna.< Please refer to the Owner's Manual provided with your sound system for detailed information on its use. Overview Controls Car care The reception and sound quality obtained from mobile radios varies according to a variety of factors, including the broadcast range of the transmitter and the directional orientation of the antenna.
136nTire inflation pressure Tire condition Information for your safety Do not drive on a deflated (flat) tire. A flat tire greatly impairs steering and braking response, and can lead to complete loss of control over the vehicle. Avoid overloading the vehicle so that It is not merely the tire's service life, but the permitted load on the tires is not exalso driving comfort and – above all else ceeded.
Tire replacement Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100.
138nTire replacement Tire rotation Uniform Tire Quality Grading Tire age Between the axles Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: The date on which the tire was manufactured is indicated by the code on the sidewall: DOT ... 179 means that the tires were manufactured in the 17th week of 1999.
Wheel and tire combinations Should you decide to rotate the tires, it is essential to comply with the following: Rotate tires on the same side only, since braking characteristics and road grip could otherwise be adversely affected. The right choice Codes on tires and wheels The tire codes will aid you in selecting the correct tire. Codes on radial tires: The speed rating indicates the approved maximum speed for the tire.
140nWheel and tire combinations Winter tires All-season an winter tires: Choosing the right tire Q M+S = up to 100 mph (160 km/h) T M+S = up to 118 mph (190 km/h) H M+S = up to 130 mph (210 km/h) BMW recommends winter tires (M+S radial tires) for driving in adverse winter road conditions. While tires known as all-season tires (M+S designation) provide better winter traction than summer tires with load ratings H, V, W and ZR, they generally do not achieve the performance of winter tires.
Tire condition, tire pressure Winter tires display a perceptible loss in their ability to cope with winter driving conditions once the tread wears to below 0.16 in (4 mm), and should thus be replaced. Comply with the specified tire inflation pressures – and be sure to have the wheel and tire assemblies balanced every time you change the tires. Overview Controls Use narrow-link BMW snow chains on summer or winter tires only in pairs and only on the rear wheels.
142nApproved wheel and tire specifications Tire specifications Light-alloy wheel All-season tires 235/60 R 16 100 H M+S 7.5Jx16 8Jx16 Summer tires 235/60 R 16 100 W 7.5Jx16 8Jx16 245/55 R 16 100 W 8Jx16 235/50 ZR 18 8Jx18 Rear: 255/45 ZR 18 The use of rims and wheel bolts that do not meet the specifications of the original factory-installed equipment will affect the safe operation of your vehicle and may cause an accident and personal injury.
Hood Controls To open To close Pull the lever located at the lower lefthand side of the instrument panel. Pull the release handle and open the hood. Allow the hood to drop from a height of about 12 inches (30 cm) so that it audibly engages. Data To avoid injuries, be sure that the travel path of the hood is clear when it is closed, as with all closing procedures. If it is determined that the hood is not completely closed while driving, stop immediately and close it securely.
compartment – BMW 740i/L 380us689 144nEngine Online Edition for Part No.
Engine compartment – BMW 740i/L 145n 2 Auxiliary terminal for jump starting 183 3 Engine oil dipstick 149 Overview 1 Brake fluid reservoir 152 5 Coolant expansion tank 151 6 Reservoir for headlamp and windshield washer system 148 Controls 4 Engine oil filler neck 149 Index Data Technology Repairs Car care 7 Fuse box 180 Online Edition for Part No.
compartment – BMW 750iL 380us690 146nEngine Online Edition for Part No.
Engine compartment – BMW 750iL 147n 2 Auxiliary terminal for jump starting 183 3 Engine oil filler neck 149 Overview 1 Brake fluid reservoir 152 5 Engine oil dipstick 149 6 Reservoir for headlamp and windshield washer system 148 Controls 4 Coolant expansion tank 151 Index Data Technology Repairs Car care 7 Fuse box 180 Online Edition for Part No.
fluids 380de082 148nWasher Washer nozzles Antifreeze agents or intensive windshield cleaning agents for the washer systems are highly flammable. For this reason, keep them away from sources of flame and store them only in their original containers. Store them so that they are inaccessible to children. Comply with the instructions on the containers.< Windshield washer The spray from the nozzles should be directed so as to ensure effective cleaning, even at high speeds.
Engine oil As with fuel economy, oil consumption is directly influenced by your driving style and vehicle operating conditions. Controls Wait until the level has dropped to just above the lower mark before adding oil. However, do not wait until the oil drops below the lower mark. BMW engines are designed to operate without oil additives. The use of additives could lead to damage in some cases. This is also true for the automatic transmission, the differential and the power steering system.
150nEngine oil Engine oil specifications Viscosity ratings The quality of the engine oil selected has critical significance for the operation and service life of an engine. Based on extensive testing, BMW has approved only certain engine oils. Viscosity is the oil flow rating as established in SAE classes. Use only approved "BMW High-Performance Synthetic Oil." If you are unable to obtain "BMW HighPerformance Synthetic Oil," you can add small amounts of synthetic oil in between oil changes.
Coolant Controls Car care Checking coolant level Correct coolant level when the engine is cold (approx. 68 7/206): Unscrew the cap from the expansion tank. Data The coolant level is correct when the end of the red float is aligned with the upper edge of the filler opening (refer to the arrow in the illustration), or max. 0.8 in (2 cm) higher, for instance up to the second mark on the float (see also the schematic diagramm next to the cap).
152nCoolant Brake fluid To add coolant 1 Start by turning the cap counterclockwise. Pause to allow any accumulated pressure to escape, then remove the cap 2 If the coolant is low, slowly add coolant until the correct level is reached – do not overfill. 380de080 Wait until the engine cools before removing the cap from the expansion tank. The needle of the coolant temperature gauge in the instrument cluster must be located in the blue zone; otherwise, there is a danger of scalding.
153n Controls Car care Technology Repairs Data In the engine compartment, stamped on the right-hand strut dome (arrow) and on the upper edge of the instrument panel on the left side. Index 380de074 Overview Vehicle Identification Number Online Edition for Part No.
The BMW Maintenance System 380us008 154n The BMW Maintenance System has been designed as a reliable means of providing maximum driving and operating safety – and as cost-effectively as possible for you. Please keep in mind that regular maintenance is not only necessary for the safety of your vehicle, but also plays a significant role in maintaining the resale value of the vehicle.
Caring for your car When using an automatic car wash, be sure that: > The car wash system is suited for the dimensions of your vehicle > No damage will occur on vehicles with attached body accessories (such as spoilers or antennas). If you are uncertain, consult the manager of the car wash > The wheels and tires of your vehicle cannot be damaged by the conveyance devices of the car wash system > The vehicle is cleaned with minimum brush pressure, and that ample water is available for washing and rinsing.
156nCaring for your car Exterior finish To provide effective corrosion protection, multilayer paintwork is applied at the factory. Cataphoretic immersion priming techniques are supplemented using special body-cavity protectants, with the application of specially-developed and extensively tested materials. A layer of flexible PVC is first applied to the undercarriage. Following this, a comprehensive undercoating treatment with a wax-based protectant is applied.
Caring for your car Any contamination remaining on the surface of the vehicle will be especially conspicuous after washing. Use cleaning fluid or alcohol with a clean cloth or cotton pad to remove. Remove tar spots with tar remover. After cleaning, the affected areas should be waxed to ensure continued protection. Use cleaning and car-care products that you can obtain at your BMW center.< You can use a glass cleaner to remove any wax or silicone that may have been left on the windows during waxing.
158nCaring for your car Window care You can use window and glass cleaner to clean interior window surfaces and mirrors without streaking. Never use polishing pastes or abrasive (quartz) cleansers on mirror lenses. Break-resistant security glass The glass used for the side windows is designed to provide resistance to breakage and protection against vandalism. These break-resistant windows contain several layers of a transparent plastic film which is sandwiched between the inner and outer glass panes.
Caring for your car Please use only a damp cloth to clean wooden fascia panels and components. Follow up by drying with a soft cloth. Use cleaning and car-care prodPlastic components, vinyl upholstery, ucts that you can obtain at your headliners, lamp lenses, the clear cover BMW center. < of the instrument panel and components with a sprayed dull black surface can be cleaned with water (add plastic cleaner as required). Do not allow moisture to soak through the seats or headliner.
160nCaring for your car Since dirt and grease gradually attack the protective layer of the leather, the cleaned surfaces should be treated with BMW leather care agent. This also acts as an antistatic agent. For protection against dampness or moisture, treat the leather with a BMW impregnating agent. We recommend that you perform this procedure twice a year on leather exposed to normal use. Cleaning agents can contain substances that are dangerous or pose health risks.
3 Side airbags (front and rear*) Important safety notices Do not attempt to remove the gas generators of the airbag restraint system from the vehicle. Have testing and service procedures performed by specially-qualified technicians only. In the event of a malfunction, deactivation, or triggered actuation (as a response to an accident) of the airbag restraint system, consult a BMW center for repairs or service operations. The side airbags in the rear* of your vehicle are deactived.
162n Technical modifications to the vehicle Any BMW center will be glad to inform you of the advisability, legal requirements and factory recommendations with regard to technical modifications on the car. For this purpose, the BMW center requires the Vehicle Identification Number and, in some cases, also the engine number. Do not remove the protective lens and avoid staring directly at the unfiltered beam for extended periods (several hours), as inflammation of the iris could result.
OBD connector Controls Car care Technology Repairs Data Under certain conditions, the indicator will blink or flash. This indicates a rather severe level of engine misfire. When this occurs, you should reduce speed and consult the nearest BMW center as The interface socket for the onboard di- soon as possible.
164n Online Edition for Part No.
Controls Car care Operation, care and maintenance Owner service procedures Advanced technology Technology Repairs Assistance, giving and receiving: Jump-starting 183 Towing the vehicle 184 Controls and features Technical Data Data In case of electrical malfunction: Fuel filler door 182 Sliding/Tilt sunroof 182 Overview Index Index Replacement procedures: Onboard tool kit 166 Windshield wiper blades 166 Lamps and bulbs 167 Changing tires 173 Battery 176 Fuses 180 Overview 165n Repairs Online Edi
166nOnboard tool kit Windshield wiper blades Use only wiper blades approved by BMW.< The onboard tool kit is located in the luggage compartment lid. Loosen the wingnut to open. 380de097 394de080 Fold the wipers back onto the windshield before turning the ignition key to position 1 or 2. If you do not, they could be damaged.
Lamps and bulbs Overview Press the tabs together (arrows). 2 High beams Insert the screwdriver (from the onboard tool kit) and press in the direction of the arrow. Car care Controls 1 Low beams Technology Repairs Release the lamp cover Data A replacement bulb set is available from your BMW center. The illustration shows the left-hand side of the engine compartment.
168nLamps and bulbs 1 2 3 4 5 Remove the cover Pull off the connector at the bulb Detach the wire clamp Replace the bulb Reassemble in reverse order. 380us099 Parking lamp For checking and adjusting headlamp aim, please contact your BMW center.< 5 watt bulb 1 Pull out the bulb holder 2 Pull off the bulb and replace it. When cleaning the headlamps, please observe the following: > Do not clean by wiping with a dry cloth (scratches).
Lamps and bulbs Turn signals/Parking lamps (side marker lamps), front 5 watt bulb 1 Use a screwdriver to pry out the lamp at the rear edge 2 Apply gentle pressure to the bulb while turning it to the left to remove. Controls Side turn signals Car care 380de100 6 When you have replaced the bulb, plug the light into the reliefs on the headlamp with the tabs. Push the assembly into place and tighten the screw 7 Secure the assembly cover.
380us102 Front fog lamps Tail lamps H3 bulb, 55 watt Tail lamp: 5 watt bulbs Remaining bulbs: 21 watt 1 Use a screwdriver to release the fog lamp retainer (arrow) 2 Pull the fog lamp out toward the front 3 Release and remove the cover on the rear of the lamp assembly 4 Remove the plug 5 Detach the wire clamp 6 Replace the bulb 7 After replacing the bulb, guide the lamp assembly back into position. Continue pressing until you hear the detent snap into place.
Lamps and bulbs Interior lamp (10 watt bulb) with reading lamps (10 watt bulbs) 1 Interior lamp: Use a screwdriver to press out the lamp sideways and remove the lens. Pull the bulb out of the contact studs 2 Reading lamp: Gently press against the lamp while turning it to the left to remove.
172nLamps and bulbs Footwell lamps Glove compartment lamp 5 watt bulb 5 watt bulb 1 Use a screwdriver to remove the lens to the side 2 Replace the bulb. 1 Apply a screwdriver to the recess to pry the lamp out 2 Remove the reflector 3 Replace the bulb. Door warning lamps 5 watt bulb Luggage compartment lamps 1 Apply a screwdriver to the narrow side of the lamp to pry it out 2 Turn the bulb holder to the left to remove 3 Replace the bulb.
Changing tires Overview Car care Controls > Car jack Fold the right-hand trim panel of the luggage compartment down using the handle at the top. Loosen the wing nut (arrow 1). When you have completed work, screw the jack all the way back down. Fold the handle back and insert it in its holder > Wedge (wheel chock) Next to the battery, under the jack.
174nChanging tires > Spare tire and adapter* for removal of the lug bolt cover* Both are stored in the luggage compartment below the floor mat. Fold back the mat for access. Remove the adapter (arrow), unscrew the wing nut by hand and remove the wheel > Wheel lug wrench, alignment tool and screwdriver Are in the onboard tool kit on the underside of the luggage compartment lid (refer to page 166).
Overview Controls Car care Technology Repairs Data 10 Take the alignment tool from the onboard tool kit and insert it together with the plastic insert into one of the bolt sockets (arrow) 11 Position the spare wheel on the hub. Screw at least two lug bolts finger-tight into opposite bolt holes. Remove the alignment tool 12 Screw in the remaining lug bolts.
The vehicle jack is designed for changing tires only. Do not attempt to raise another vehicle model with it or to raise any load of any kind. To do so could cause accidents and personal injury. Have the lug bolts checked for proper tightness with a calibrated torque wrench at the earliest possibility (torque specification: 72 lb-ft/100 Nm).< When storing the wheel, take care to ensure that you do not damage the retaining pin in the spare tire recess.
Battery Please read the following information before working with the battery. Wear eye protection. Do not allow particles containing battery acid or lead to come into contact with your eyes, your skin, or your clothing. Battery acid is extremely corrosive. Wear eye protection and protective gloves. Do not tip the battery. Battery acid can leak from the ventilation openings. A highly-explosive gas is generated when the battery is charged.
178nBattery Charging the battery 380de655 Charge the battery in the vehicle only when the engine is off. Charge the battery using the supplementary positive terminal and ground (terminal) in the engine compartment (refer to "Jumpstarting" on page 183). Charge condition – BMW 740i/L You can read the charge condition of the battery with the "Magic Eye*" (a hydrometer): > Green: Adequate charge > Black: Not charged adequately. The battery must be recharged.
Battery When installing a battery, be sure that it is mounted properly. If the battery is not mounted properly, it will not be adequately secured in case of an accident.< Controls Car care Technology Repairs BMW 750iL: Please contact your autho- Unscrew the battery retaining clamp (arrow). rized BMW center for additional inforWhen installing the battery, connect the mation. positive terminal first, then connect the negative terminal.
180nFuses 380de085 A list of the fuses, their respective amDo not attempt to repair a burned pere ratings and the equipment in their fuse or replace it with a fuse havcircuits is provided next to the fuse box. ing a different color or amperage rating. To do this could cause a fire in the vehiWhen you close the fuse box, be sure cle resulting from a circuit overload.< that the cover is seated securely. If an electrical accessory should fail, switch it off and check the fuse.
Fuses A list of the fuses, their respective ampere ratings and the equipment in their circuits is provided on the rear of the side trim. Controls Car care Technology Repairs 3 Move the sound insulation material slightly to the side.
Manual release 1 Use the handle to lower the trim panel on the right side of the luggage compartment 2 BMW 750iL: Unscrew the hexagon nut (arrow), lift the battery support up slightly and swing it inward together with the battery 3 Pull the knob with the fuel pump symbol. 390de376 Sliding/Tilt sunroof 380de614 filler door 380de672 182nFuel Manual operation 1 Remove the interior lamp (refer to page 171).
Jump-starting 183n Technology Repairs Car care Controls Follow the same sequence for connecting the jumper cables if you assist in jump-starting another vehicle. If you do not, there is a risk of injury caused by spark generation at the battery.
Have the battery recharged if necessary. Tow fitting The screw-in tow fitting is stored in the onboard tool kit; be sure that it remains in the vehicle at all times. This fitting is designed for installation in the tow sockets located at the front and rear of the vehicle, and is intended for towing on paved road surfaces only. It should not be used to pull a vehicle out of deep snow, mud, sand, etc. Always observe all applicable towing laws and regulations.
Towing Find some means of identifying the vehicle in tow, for instance, place a sign or warning triangle in the rear window. To prevent the steering lock from engaging, make sure that the ignition key remains in position 1, even if the electrical system has failed. The steering and brakes are without power assist when the engine is off. This means that increased effort is required for steering and braking.
186n Online Edition for Part No.
Operation, care and maintenance Controls Controls and features Car care Overview Advanced technology Technology Repairs Owner service procedures Data Technical Data Index Index Airbags 188 Adaptive Transmission Control (ATC) 188 Automatic Stability Control plus Traction (ASC+T)/Dynamic Stability Control (DSC) 189 Radio reception 190 BMW active seat 190 Safety belt tensioner 191 DSP sound system 191 Rearview mirror with automatic dimmer 192 Rain sensor 192 Tire Pressure Control (RDC) 193 Xenon lam
188nAirbags ATC The airbags located under the marked covers inflate and unfold in a matter of a few milliseconds. In this process, they tear through the designed separation points of the upholstered covers or press them out. ATC In the event of a severe side impact, the head protection and side airbags in the front and/or rear* are triggered.
In addition, DSC permanently monitors the vehicle's current operating condition and compares it with an ideal condition that is calculated from the sensor signals. If discrepancies from this ideal condition (understeering or oversteering, for example) occur, DSC stabilizes the vehicle in fractions of a second by reducing engine power output and with the assistance of braking intervention at individual wheels. Dangerous skids are thus prevented from the very beginning.
190nRadio reception BMW active seat* Radio waves — mediumwave, longwave and shortwave — offer a wide range of reception, because the broadcast signals travel not only along the ground as surface waves, but also as waves bounced back to earth from the ionosphere. Frequency-modulation (FM) provides substantially better sound quality than AM. However, because FM transmissions rely on line-of-sight broadcast waves, their effective reception range is limited.
191n Car care Technology Repairs Data The DSP Professional premium sound system features a special amplifier combined with Digital Sound Processing (DSP) and integrated speakers to surround you with crisp, true-to-life sound reproduction. The speaker system's subwoofers, woofers, midrange speakers and tweeters furnish you with an impressively fullbodied listening experience.
192nRearview mirror with automatic dimmer Rain sensor* The interior rearview mirror with automatic dimming feature reduces glare from following traffic by adapting the intensity of the reflected images to correspond to levels of light registered by the unit's sensors. The mirror reverts to its undimmed setting as soon as the light source disappears. One of these sensors is mounted on the front of the mirror housing and is designed to monitor light levels in the area forward of the vehicle.
Near every wheel is an antenna in the body that receives the signal from the wheel. A central electronics system evaluates the quadruple signals and forwards any changes. Behind the valve stem in every wheel, there is an electronic chip which is designed for severe-duty applications and long service life. It contains a pressure sensor, a transmitter and a battery. The pressure is measured in extremely short time intervals and then transmitted by a radio signal.
194nXenon lamps* 390de134 Xenon lamps provide significantly-improved visibility, especially during adverse weather conditions and driving situations (driving at night in heavy rain or through road repair areas where there are no lane markers, for instance). The xenon lamps light up the side and front areas of the vehicle with significantly more brightness and uniformity than the traditional halogen lamp. In a xenon lamp, an electric arc replaces the filament in order to generate intense illumination.
Index Data Technology Repairs Car care Controls Overview 195n Online Edition for Part No.
196n Online Edition for Part No.
Operation, care and maintenance Controls Controls and features Car care Overview Advanced technology Technology Repairs Owner service procedures Data Technical Data Index Index Engine specifications 198 Dimensions 199 Weights 200 Capacities 201 Electrical system 202 Drive belts 202 Overview 197n Data Online Edition for Part No.
198nEngine specifications m BMW 740i/L BMW 750iL Displacement Number of cylinders cu in (cm ) 268.4 (4,398) 8 328.2 (5,379) 12 Max. output at engine speed hp rpm 282 5,400 322 5,000 Maximum torque at engine speed ft-lb (Nm) rpm 324 (439) 3,700 361 (490) 3,900 Compression ratio e 10.0 10.0 Stroke/bore in (mm) 3.26/3.62 (82.7/92.0) 3.11/3.35 (79.0/85.0) Fuel-injection system Digital-electronic engine-management system Online Edition for Part No.
Dimensions All dimensions are given in inches (mm). Min. turning circle dia.: BMW 740iL/750iL 40.0 ft (12.2 m), BMW 740i 38.1 ft (11.6 m). Index 380us701 Data Technology Repairs Car care Controls Overview 199n Online Edition for Part No.
200nWeights BMW 740i BMW 740iL BMW 750iL Curb weight (with driver, ready for operation, full tank of fuel, options not included) lbs (kg) 4,255 (1,930) 4,288 (1,945) 4,597 (2,085) Approved gross vehicle weight lbs (kg) 5,313 (2,410) 5,346 (2,425) 5,655 (2,565) Approved front axle weight lbs (kg) 2,590 (1,175) 2,601 (1,180) 2,646 (1,200) Approved rear axle weight lbs (kg) 2,910 (1,320) 2,932 (1,330) 3,086 (1,400) Maximum load capacity lbs (kg) 1,058 (480) 1,058 (480) 1,058 (480) Appr
Capacities reserve gal. (liters) Windshield washer system, with headlamp washer system quarts (liters) quarts (liters) approx. approx. approx. approx. 22.5 25.1 2.6 3.2 (approx. (approx. (approx. (approx. 85) 95) 10.0) 12.0) – – – – BMW BMW BMW BMW 740i/L Fuel specification: Refer to 750iL page 27 740i/L 750iL approx. 4.7 approx. 4.5) approx. 6.5 (approx. 6.0) For details: Refer to page 148 Cooling system including heater quarts (liters) circuit 12.7 (12.
202nElectrical system Drive belts Battery BMW 740i/L BMW 740i/L: 12 V, 110 Ah BMW 750iL: 12 V, 55 Ah 12 V, 110 Ah Water pump – AC generator – power steering V-belt 7 K x 1635 Spark plugs A/C compressor V-belt 5 K x 1004 NGK BKR 6 EQUP or BMW 750iL Bosch FGR 7 DQP (not released at this time) AC generator – power steering V-belt 7 K x 1045 This spark ignition system meets all requirements of the Canadian Interference-Causing Equipment Regulations (ICES-2).
Index Data Technology Repairs Car care Controls Overview 203n Online Edition for Part No.
204n Online Edition for Part No.
Operation, care and maintenance Controls Controls and features Car care Overview Advanced technology Technology Repairs Owner service procedures Data Technical Data Index Index Everything from A to Z 206 Owner service procedures 212 Overview 205n Index Online Edition for Part No.
Everything from A to Z A ABS 129 Accessories 6 Activated-charcoal filter 109 Active seat 50 Adaptive Transmission Control (ATC) 67, 69, 188 Add engine oil 149 washer fluid 148 Adjust backrest 48 steering wheel 51 thigh support 50 Air distribution 106 Air flow 107 Air jets 104 Air outlets, ventilation 104 Air pressure 136 Airbags 21, 57, 161, 188 Alarm system, deactivating in an emergency 43 Antenna 190 Antifreeze, radiator 132, 152 Antilock Brake System (ABS) 129 Antitheft alarm system 42 Antitheft system 3
Everything from A to Z Overview Controls EDC (Electronic Damper Control) 97 Electric power windows 44 Electric rear seat adjustment 51 Electric steering wheel adjustment 51 Electrical accessories, failure 180 Electrical malfunction fuel filler door 182 sliding/tilt sunroof 182 Electrical system 202 Electronic Damper Control (EDC) 97 Electronic immobilizer 33 Emergency deactivation of the alarm system 43 Emergency release doors 34 fuel filler door 182 luggage compartment lid 39 sliding/tilt sunroof 182 Ene
Everything from A to Z Estimated time of arrival 91 Exterior door handles, lighted 36 Exterior finish, care 156 G I J Gasoline 27 Glove compartment 115 bulb replacement 172 Gross vehicle weight 200 Ice warning 76 Ignition key 32 Ignition switch 63 Independent ventilation system 111 Independent ventilation system, please refer to the separate Owner's Manual of the onboard computer Indicator lamps 20 Inflation pressures 28, 136 monitoring 98, 193 INSPECTION 78 Instrument cluster 18 Instrument panel light
Everything from A to Z N Nozzles 104 P Paint blemishes, exterior dirt 157 Park Distance Control (PDC) 94 R Radio Car radio, please refer to the separate Owner's Manual Radio Data System (RDS) 190 Overview Controls Parking aid 94 Parking brake 21, 65 Parking in winter 134 Parking lamps 101 Passenger side exterior mirror tilt function 54 PDC (Park Distance Control) 94 Playing cassettes, refer to the Radio Owner's Manual Playing CDs, please refer to the Radio Owner's Manual Pocket lamp 115 Pollen from the
Everything from A to Z Radio reception 135, 190 Rain sensor 72, 155, 192 RDC (Tire Pressure Control) 98, 193 RDS (Radio Data System) 190 Reading lamps 102 Rear footrests 119 Rear passenger-area air conditioning 109 Rear seat adjustment, electric 51 Rear seat control 116 Rear seat heating 110 Rear window blind 111 Rear window defroster 74, 105, 107 Rearview mirrors 52 Refueling 26 Remote control 35 Remote control for onboard computer 93 Removing condensation, windows 106 Replacement keys 32 Replacing tires 1
Everything from A to Z Vanity mirrors 53 Vehicle battery 176, 202 Vehicle care exterior 157 interior 159 Vehicle Identification Number 153 Vehicle storage 161 Ventilation 104, 111 air flow 104 draft-free 108 tips for pleasant driving 106 Ventilation system while parked, please refer to the separate Owner's Manual of the onboard computer Vinyl care 159 Viscosity 150 Voice control 23, 24 X Xenon lamps 168, 194 Overview Controls V Wipers 72 replacing blades 166 Work in the engine compartment 143 Car care
Owner service procedures A D Adding brake fluid 152 engine coolant 151 engine oil 149 washer fluids 148 Air pressure 28 Deactivating the interior motion sensor 36 Deactivating the tilt sensor alarm system 36 Defrosting, windows 106 Difficult steering 134 Doors, manual operation 34 B Backup lamps, bulb replacement 170 Battery checking charge condition 178 discharged 183 Brake lamps, bulb replacement 170 Brakes, faults 132 Bulb replacement 167 C Changing a wheel 173 Charging the battery 178 Check Control
T Tail lamps, bulb replacement 170 Tail lamps, bulb replacement 170 Tilt sensor alarm system, deactivation 43 Tire damage 136 Tire failure 173 Tire inflation pressure 28, 136 Tools 166 Tow fittings 184 Towing the vehicle 184 Turn signal, bulb replacement 169 Overview Warning lamps 20 Warnings 79 Washer fluid reservoir, filling 148 Wheel change 173 Windows, demisting 106 Windshield washer nozzle adjustment 148 Wiper blades, replacing 166 Work in the engine compartment 143 Controls W Security glass, care
Refueling So that you will have important specifications available when you stop to refuel, we recommend that you supplement this table with data that apply to your vehicle. Fuel Designation AKI: minimum AKI: for rated performance AKI: for enhanced performance Engine oil Quality The oil volume between the two marks on the dipstick corresponds to approx. 1.1 US quarts (1 liter).
01 41 0 004 597 US En We wish you an enjoyable driving experience. The Ultimate Driving Machine Online Edition for Part No.
