Owner's Manual for Vehicle The Ultimate Driving Machine Contents A-Z Online Edition for Part no.
Online Edition for Part no.
X5 xDrive30i X5 xDrive48i X5 xDrive35d X6 xDrive 35i X6 xDrive 50i Owner's Manual for Vehicle Congratulations, and thank you for choosing a BMW. Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. We therefore have this request: Please take the time to read this Owner's Manual and familiarize yourself with the information that we have compiled for you before starting off in your new vehicle.
© 2008 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English IX/08, 09 08 500 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no.
10 16 23 Cockpit iDrive Voice activation system Controls 28 48 61 65 78 91 Opening and closing Adjusting Transporting children safely Driving Everything under control Technology for comfort, convenience and safety 110 Lamps 114 Climate 123 Practical interior accessories Refueling Wheels and tires Under the hood Maintenance Care Replacing components Giving and receiving assistance Reference 286 Technical data 291 Short commands of voice activation system 296 Everything from A to Z Driving tips 138 Thin
Notes Notes About this Owner's Manual Symbols used We have made every effort to ensure that you are able to find what you need in this Owner's Manual as quickly as possible. The fastest way to find specific topics is to refer to the detailed index at the back of the manual. If you wish to gain an initial overview of your vehicle, you will find this in the first chapter.
Please bear in mind that the manual may contain information on accessories and equipment that you have not specified for your own vehicle. Sections describing options and special equipment are marked by asterisks * to assist you in identifying possible differences between the descriptions in this manual and your own vehicle's equipment. Advanced technology, e.g. the use of modern materials and high-performance electronics, requires specially adapted maintenance and repair methods.
Notes Parts and accessories California Proposition 65 Warning For your own safety, use genuine parts and accessories approved by BMW. When you purchase accessories tested and approved by BMW and Genuine BMW Parts, you simultaneously acquire the assurance that they have been thoroughly tested by BMW to ensure optimum performance when installed on your vehicle. BMW warrants these parts to be free from defects in material and workmanship.
> Rust Perforation Limited Warranty > Federal Emissions System Defect Warranty > Federal Emissions Performance Warranty > California Emission Control System Limited Warranty Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.
Online Edition for Part no.
At a glance This overview of buttons, switches and displays is intended to familiarize you with your vehicle's operating environment. The section will also assist you in becoming acquainted with the control concepts and options available for operating the various systems. Online Edition for Part no.
Cockpit Cockpit Around the steering wheel: controls and displays 1 Rear window safety switch 42 2 Opening and closing windows 41 3 Folding exterior mirrors in and out* 57 4 Adjusting exterior mirrors 57 Automatic curb monitor* 58 5 6 Parking lamps 110 Low beams 110 Automatic headlamp control* 110 Adaptive Head Light* 112 Instrument lighting 113 7 Fog lamps 112 Head-Up Display* 107 10 Online Edition for Part no.
Time, date, outside temperature, Check Control 78, 86 Individually programmable 59 Computer 80 Steering wheel heating* 59 10 Instrument panel 12 16 Windshield wipers 74 17 Rain sensor 74 BMW X5: rear window wiper 75 12 Steering wheel adjustment 58 Cruise control* 75 Navigation 11 15 Horn, entire surface Driving tips BMW X6: upshifting or downshifting with automatic transmission 71 At a glance Individually programmable 59 Controls Roadside parking lamps* 112 18 Releasing hood 258 Starting/st
Cockpit Instrument panel 1 Indicator lamps for turn signals 2 Speedometer > Odometer and trip odometer 78 3 Indicator and warning lamps 13 > Computer 80 4 Tachometer 79 5 BMW X5: energy control 79 BMW X6: engine oil temperature 79 or energy control 79 > Date and remaining travel distance for service requirements 82 6 7 Display for > Automatic transmission positions 70 > HDC Hill Descent Control 98 Display for > > Clock/date 78 Check Control message present 85 > Adaptive Drive* 99 > O
The concept In the case of corresponding urgency, this information is displayed immediately when the related lamp lights up. Indicator lamps without text messages At a glance Indicator and warning lamps The indicator and warning lamps can light up in different combinations and colors. Fog lamps 112 Some lamps are tested for proper function by briefly lighting up during starting of the engine or when the ignition is switched on.
Cockpit Around the center console: controls and displays 14 Online Edition for Part no.
15 Selecting AM or FM waveband 16 Ejecting navigation DVD with navigation system* 148 2 Initiating an emergency request 279 3 Reading lamps 113 4 Glass sunroof 42, 45 5 Interior lamps 113 6 Passenger airbag status lamp 105 Active seat* 57 7 Control Display 16 Displays for menu navigation 8 Hazard warning flashers PDC Park Distance Control* 91 Rear view camera* 93 9 Central locking system 29 11 Automatic climate control with 2-zone control 115 Automatic climate control with 4-zone control*
iDrive iDrive iDrive combines the functions of a large number of switches. This allows these functions to be operated from a central position. The following section provides an introduction to basic menu navigation. The control of the individual functions is described in connection with the relevant equipment.
> Telephone* > BMW Assist* or BMW TeleServices* From radio readiness, refer to page 65, the following message is shown on the Control Display: Controls Navigation or onboard information > Navigation system* > Onboard information, e.g. for displaying the average fuel consumption Entertainment > Radio > CD player and CD changer* > External audio device Climate At a glance Communication Operating principle To hide the message: Press the controller. This displays the start menu.
iDrive Opening menu items of start menu Displays in menu With the start menu you can open the menu items Communication, Navigation, Entertainment and Climate by moving the controller to the left, right, front or rear. 1 Each menu is divided into fields. The respective active field is highlighted. 2 A symbol indicates the last selected menu item of the start menu: You can open the menu by pressing the controller.
You can view the individual steps under Settings on Control Display, Brightness of Control Display, refer to page 89.
iDrive Status information Assistance window* 1 Additional information can be displayed in the assistance window: Display for: > Entertainment: Radio, CD > Telephone* in "Communication": Name of linked mobile phone, network search or no network > "BMW Assist"*: Existing voice connection with a service from BMW Assist 2 Entertainment sound output off 3 Display for traffic information*, TI: Traffic information for the navigation system can be received and transmission is switched on 4 Display for: >
2. Select "Assist. window off" and press the controller. Programmable memory buttons You can save and run certain functions of iDrive on the programmable memory buttons: At a glance 1. Move the controller to the right to change to the assistance window and press the controller.
iDrive 1. Select the desired function, e.g. radio station or CD. 2. Press the ... than 2 seconds. button longer Deleting button assignments 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. If the vehicle is equipped with two drives, the current track is stored for CDs with compressed audio files.< 3. Select "Settings" and press the controller. Running function 5. Select "Programmable Memory Keys" and press the controller. Press the ... button. 4.
button on the steering wheel. This symbol on the Control Display and an acoustic signal tell you that the voice activation system can respond to commands. The voice activation system uses a special microphone located in the area of the interior rearview mirror, refer to page 14. Precondition Via iDrive, set the language that applies for the voice activation system in order to enable identification of the spoken commands. To set the language of iDrive, refer to page 90. 2. Say the command.
Voice activation system Commands Example: selecting a track Having possible commands read aloud 1. Switch on Entertainment sound output if necessary. You can have the system read aloud the possible commands related to the selected menu item on the Control Display. To have the system list the possible commands: 2. Press the button on the steering wheel. 3.
At a glance Notes The mobile phone can also be operated with voice commands, refer to page 231.< For voice commands, bear the following in mind: Controls > Say the commands and numbers smoothly and at normal volume, avoiding excessive emphases and pauses. This also applies to spelling when entering the destination. Driving tips > Always issue commands in the language of the voice activation system. > When selecting a radio station, use the common pronunciation of the station name.
Online Edition for Part no.
Controls This chapter is intended to provide you with information for complete control of your vehicle. Its extensive array of features and accessories, both for driving and for your own safety, comfort and convenience, are described here. Online Edition for Part no.
Opening and closing Opening and closing Keys/remote control New remote controls To obtain additional or replace lost keys, new remote controls with an integrated key are available at your BMW Sports Activity Vehicle Center. Personal Profile The concept Each remote control contains a battery which is automatically charged in the ignition lock while driving. Drive a longer distance with each remote control at least twice a year to keep the battery charged.
> Triple turn signal activation, refer to page 73 The system simultaneously engages and releases the locks on the following: > Welcome lamps, refer to page 110 > Doors > Pathway lighting, refer to page 111 > Daytime driving lamps*, refer to page 111 > PDC Park Distance Control*: optical warning, refer to page 92 > Rear view camera*: > Selecting functions, refer to page 93 > Type of display, refer to page 95 > Head-Up Display*: selection, brightness and position of display, refer to page 107 > Automatic
Opening and closing Unlocking Press the button. This unlocks the vehicle. Setting unlocking behavior You can set whether the first press of the button unlocks only the driver's door or the entire vehicle. iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Change to upper field if necessary.
You can activate or deactivate the confirmation signals. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Door locks" is selected and press the controller. 6. Select "Confirmation" and press the controller.
Opening and closing Opening and closing: Using door lock Opening and closing: From inside Do not lock the vehicle from the outside if persons are inside because unlocking from the inside is not possible without special knowledge.< This button serves to unlock or lock doors and the liftgate, with the front doors closed. It does not activate the anti-theft system. The fuel filler door remains unlocked. When unlocking 1. Turning the key once unlocks the driver's door and the fuel filler door. 2.
Unlocking and opening > Either unlock the doors together with the button for the central locking system and then pull the door handle above the armrest or Locking > Use the central locking button to lock all of the doors simultaneously, or Press the button: the liftgate opens somewhat unless it has been locked. Opening from outside Navigation > pull on the door handle of each door twice: the first time unlocks the door, the second time opens it. > press down the lock button of a door.
Opening and closing 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 2. Open the liftgate and press in the handle. The liftgate is locked again as soon as it is closed. 5. Change to upper field if necessary. Turn the controller until "Door locks" is selected and press the controller. 6. Select "Tailgate" and press the controller.
Closing is not canceled when you put the vehicle into motion.< Manually opening or closing > Press the button on the remote control for approx. 1 second. In case of an electrical defect of the automatic liftgate operation function: To stop the opening process: 1. Manually release the liftgate, refer to page 33. > Press the button on the outside of the liftgate. 2. Open or close the liftgate slowly and without making sudden movements.
Opening and closing Opening from inside 1. To open the liftgate completely, see above. 2. For the lower position, position 1: Turn sleeves of both liftgate supports in the direction of the arrow until the line markings align in position 1. Press the button: the liftgate opens somewhat unless it has been locked. Opening from outside For the upper position, position 2: Turn sleeves of both liftgate supports in the direction of the arrow until the line markings align in position 2.
The liftgate is locked again as soon as it is closed. 5. Change to upper field if necessary. Turn the controller until "Door locks" is selected and press the controller. 6. Select "Tailgate" and press the controller. At a glance 3. Open the liftgate and press the cover back into place. Closing 7. Turn the controller. The adjustment is applied; the field can be changed. Opening liftgate Driving tips Controls Make sure that the closing path of the liftgate is clear, otherwise injuries may result.
Opening and closing To stop the opening process: Manually opening or closing > Press the button on the outside of the liftgate. In case of an electrical defect of the automatic liftgate operation function: > Press and hold the control. 1. Manually release the liftgate, refer to page 36. button on the remote > Press the button on the inside of the liftgate. > Press the button on the center console again. The opening process is interrupted if you set the vehicle in motion.< 2.
Avoiding unintentional alarms The tilt alarm sensor and interior motion sensor may be switched off at the same time. This prevents unintentional alarms, e.g. in the following situations: At a glance Indicator lamp displays Switching off tilt alarm sensor and interior motion sensor > The indicator lamp flashes after locking: The doors, hood, or liftgate are not properly closed.
Opening and closing > The engine can only be started if the vehicle detects that the remote control is located in the vehicle. Comfort closing Hold a finger or the back of a hand on the surface, arrow 2. The windows and the glass sunroof*/panorama glass sunroof* are closed. Comparison with ordinary remote control You can control the functions mentioned previously with the comfort access or by pressing the buttons on the remote control.
At a glance Before driving into a car wash The vehicle can roll if you proceed according to the following steps: 1. Insert remote control into ignition lock. 2. Depress brake pedal. 4. Release the parking brake. 5. Switch off the engine. 6. Leave the remote control in the ignition lock. 3. Lay in new battery with positive side facing upward. Opening, closing The indicator lamp in the instrument panel lights up and a message appears on the Control Display: Replace the battery of the remote control.
Opening and closing Separate switches for the rear windows are located in the rear. Safety switch For information on using convenience operation at the door lock or with the remote control, refer to page 30 or 32. For information on comfort closing with comfort access, refer to page 40. After switching off ignition You can still operate the windows with the remote control removed or the ignition switched off for approx. 1 minute, as long as neither of the front doors has been opened.
Opening and closing sunroof and sliding visor together Briefly press the switch beyond the resistance point twice consecutively. Briefly pressing the switch stops the motion. At a glance Raising, opening, closing Opening, closing Sliding visor You can move the sliding visor independently with the sunroof closed or raised. > Slide the switch back to the resistance point. The sliding visor opens as long as you keep the switch in this position. > Briefly press the switch back beyond the resistance point.
Opening and closing Closing without pinch protection system In case of danger from outside, slide the switch forward beyond the resistance point and hold. The roof closes without the pinch protection system. 3. Release and disconnect the motor plug. This significantly reduces the effort required for the manual movement. Following interruptions in electrical power supply After a power loss, the sunroof may only respond to the raise command. Then have the system initialized.
For information on using convenience operation with the remote control or at the door lock, refer to page 30 or 32. The glass sunroof is ready for operation when the ignition is switched on, refer to page 65. For information on convenience closing with comfort access, refer to page 40. Briefly press the switch beyond the resistance point. The following movements are also automatic: Controls Automatic opening and closing > With the sunroof open, press the switch: The sunroof is opened all the way.
Opening and closing Closing without pinch protection system When there is danger outside the vehicle, proceed as follows: 2. Using the screwdriver, press in the clamps one after the other, arrows 1, tilt the cover panel down, arrow 2, and remove. 1. Slide the switch forward past the resistance point and hold it there. The pinch protection system is limited and the sunroof opens slightly if the closing force exceeds a certain value. 2.
At a glance 47 Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips Controls 6. Clip the trim piece into the cover panel, arrow 1. Then fold the cover panel forward until it audibly clicks into place, arrow 2.
Adjusting Adjusting Sitting safely The ideal sitting position can make a vital contribution to relaxed, fatigue-free driving. In the interaction with the safety belts, the head restraints and the airbags, the seat position plays an important role in an accident. To ensure that the safety systems operate with optimal efficiency, we strongly urge you to observe the instructions contained in the following section. For additional information on transporting children safely, refer to page 61.
Also observe the information on damage to safety belts on page 55 and on the height of the head restraints on page 52. At a glance Pull the lever and adjust the thigh support in the longitudinal direction. Adjusting electrically To ensure that the safety systems continue to provide optimized protection, observe the adjustment instructions on page 48.< Navigation Never attempt to adjust or calibrate your seat while the vehicle is moving.
Adjusting Differs depending on seat: Lumbar support* 1 Backrest 2 Height You can also adjust the contour of the backrest to obtain additional support in the lumbar region. Additional depending on seat: The upper hips and spinal column receive supplementary support to help you maintain a relaxed, upright sitting position. > Increase or decrease curvature: press front or rear section of switch. > Shift curvature up or down: press upper or lower section of switch.
6. Select "Central locking" and press the controller. 4. Press the desired memory button 1 or 2: The LED goes out. 7. Select "Last seat pos." and press the controller. Controls 8. Select "After unlocking" or "After door opened". Calling up automatically Driving tips You can choose when the stored positions of the driver's seat, exterior rearview mirrors, and steering wheel are activated.
Adjusting Head restraints Front seats: height adjustment A correctly adjusted head restraint reduces the risk of spinal injury in the event of an accident. Adjust the head restraint so that its center is approx. at ear level. Otherwise there is increased danger of injury in the event of an accident. Only remove the head restraints if the respective seat is not occupied. Reinstall the head restraints before transporting passengers, as otherwise the head restraint cannot provide its protective function.
Longitudinal direction* BMW X5: rear seats and 3rd row seats*, adjusting height 1. Pull the lever and slide the seat into the desired position. > To raise: pull up. > To lower: press the button, arrow 1, and push the head restraint downward. In vehicles equipped with 3rd row seats, the height of the middle head restraint is not adjustable. 2. Release the lever and move the seat slightly forward or back so that it engages properly. Backrest* The backrests can be adjusted in four steps. Removing 1.
Adjusting Access to 3rd row seats* Make sure that the catch engages securely. If it is not properly engaged, transported cargo could enter the passenger compartment during braking or evasive maneuvers and endanger the vehicle occupants.< 3. Push the head restraints into the top position. Folding backrest down Pull the lever and fold the seat forward. The handle recess on the interior trim of the door pillar makes climbing in easier.
The safety belt reminder is operative at speeds above approx. 5 mph/8 km/h. It can also be activated if objects are placed on the passenger seat. Releasing 1. Grasp the belt firmly. 2. Press the red button in the buckle. 3. Guide the belt into its reel. The shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted, refer to page 49.
Adjusting The temperature is reduced, if need be, down to no heat in order to reduce the load on the battery. The LEDs remain lit. Rear Temperature distribution without active seat ventilation The heat output can be distributed variously in the seat cushion and the backrest. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Move the controller to the left to open "Climate". 3. Select "Seat heater distribution" and press the controller. 4.
Exterior mirrors Driving tips The mirror on the passenger's side is more curved than the driver's mirror. Objects reflected in the mirror are closer than they appear. Do not estimate the distance of following traffic based on what you see in the mirrors; otherwise, there is an increased risk of accident.< At a glance Mirrors Controls 4. Turn the controller to adjust the distribution. The setting is applied.
Adjusting Automatic heating Below a certain outdoor temperature, both exterior mirrors are automatically heated when the motor is running or the ignition is switched on. Interior and exterior mirrors, automatic dimming feature* Tilting down passenger-side exterior mirror – automatic curb monitor* Activating 1. Slide switch into the driver's side mirror position, arrow 1. This feature is controlled by two photocells in the inside rearview mirror, one on the front and one on the back.
> "Air recirculation on / off" Permanently shutting off outside air, refer to AUC Automatic recirculated-air control* on page 117 > "Mute on / off" Mutes the audio sources > "Monitor on / off" Switches the Control Display on/off You can program the buttons individually. The setting is stored for the remote control currently in use. iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu.
Adjusting Operating function Press the corresponding button on the steering wheel. If you have programmed "Navigation voice instructions" for one of the buttons: > To switch voice instructions on/off: Hold the button down. > To repeat the last voice instruction: Press the button. 60 Online Edition for Part no.
Children younger than 13 years of age or with a height under 5 ft/150 cm may only be transported on the 2nd row seats in child restraint devices which correspond to the age, weight and height of the child. Otherwise there is an increased danger of injury in an accident.< After mounting a child restraint device on the front passenger seat, make sure that the front and side airbags on the front passenger side are deactivated; otherwise, there is an increased risk of injury if the airbags are triggered.
Transporting children safely Locking safety belt 1. Secure the child restraint device with the belt. 2. Pull out the belt webbing completely. 3. Allow the belt webbing to be pulled in and pull taut against the child restraint device. The safety belt is locked. Make sure that the LATCH mounts have properly clicked into place and that the child restraint device is resting snugly against the backrest. Otherwise, the protective action may be reduced.< Unlocking safety belt 1. Open the belt buckle. 2.
Backrest 6 Tether strap of child restraint device Controls When using the cargo bay cover, route the tether strap through between the backrest of the 2nd row seats and the cargo bay cover. Driving tips For child restraint devices with tether strap, there are two additional attachment points on the back of the rear seat backrests, refer to arrows.
Transporting children safely On center seat with equipment with three rows of seats: 1. Slide the head restraint upward. 2. Guide the tether strap between the head restraint brackets. 3. Hook in the tether strap on the mounting point with the hook. 4. Slide the head restraint into the bottom position. Attaching tether strap to the backrest of the 2nd row seats BMW X5: 5. Pull tether strap taut. BMW X6: 1. Route tether strap over the middle of the head restraint. On outer seats: 1.
Start/Stop button Comfort access* Some electronic systems/consumers are ready for operation. The time and outside temperature are displayed in the instrument panel. With comfort access, only insert the remote control into the ignition lock in exceptional cases, refer to page 39. Removing remote control from ignition lock Do not pull the remote control out of the ignition lock using force, as otherwise damage may result.
Driving The ignition switches off automatically* if the driver's door is opened. Pressing the start/stop button again switches the ignition back on. Remote control in ignition lock or with comfort access in vehicle, refer to page 39. For example, the ignition is not switched off in the following situations: 2. Press the Start/Stop button.
The parking brake is primarily intended to prevent the vehicle from rolling while parked. You can use the parking brake in two ways: > manually, by pulling and pushing the button > automatically, by activating Automatic Hold, refer to page 67 Indicator lamp on Canadian models. As soon as you brake the vehicle almost to a stop, i.e., down to a speed of approx. 2 mph/ 3 km/h or below, the parking brake remains set.
Driving automatically held in place when standing. When driving up inclines, the system prevents your vehicle from rolling backward in an undesired way. After the engine is started, the system can be activated and deactivated at any time the driver's seat is occupied until the next time the engine is switched off. Activating The indicator lamp in the instrument panel lights up in green. Indicator lamp on Canadian models.
Indicator lamp on Canadian models. Before you start to drive, either release the parking brake manually, refer to page 67, or reactivate Automatic Hold, refer to page 68. 1. Open the left-hand side panel in the cargo bay. 2. Remove the first-aid kit* and the warning triangle* if necessary. Close the bracket of the warning triangle. 3. Insert the releasing tool, contained in the onboard tool kit under the floor panel, refer to page 269, at the releasing point.
Driving Procedure Engaging transmission position 1. Switch on the ignition. > You can only engage transmission positions D, R or N when the engine is running. 2. Press the button with the brake depressed. The indicator lamp in the instrument panel goes out as soon as the parking brake is ready for operation again. Indicator lamp on Canadian models. Any noises which occur are normal. Start-up may take several seconds.
P Park Select only with the vehicle stationary. The rear wheels are locked. P is engaged automatically as soon as you switch off the engine unless N is engaged and on vehicles with comfort access the remote control is inserted in the ignition lock, refer to page 65.< N Neutral Can, for example, be engaged in automatic car washes. The vehicle can roll. N remains engaged even after the engine is switched off whenever you leave the remote control in the ignition lock.
Driving Releasing 1. Slide back the cover of the cup holder and remove the floor mat on the bar between the cup holders, arrow 1. > Upshifting: pull on one of the shifting paddles, arrows +. > Downshifting: press on one of the shifting paddles, arrows –. Upshifts and downshifts are executed only when they will result in a plausible combination of engine and vehicle speed; thus, for example, a downshift that would cause the engine to overrev will not be executed by the system.
Signaling briefly Press lever to resistance point and hold for as long as you wish to signal. At a glance Locking Triple turn signal activation 2. If necessary, insert the lock* and lock it. 3. Close the cover in the bottom of the cup holder and lay in the mat again. 4. Close the cover of the cup holder and stow the releasing tool. Information on jump starting and towing, from page 280. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3.
Driving Washer/wiper system Activating intermittent operation or rain sensor 1 Switching on wipers 2 Switching off wipers or brief wipe Press the button, arrow 3. The LED in the button lights up. 3 Activating/deactivating intermittent wipe or rain sensor* 4 Cleaning windshield and headlamps* 5 Setting interval for intermittent wipe or sensitivity of the rain sensor* Switching on wipers Pull the lever upward, arrow 1. The lever automatically returns to its initial position when released.
At a glance Windshield washer nozzles Both windshield washer nozzles are automatically heated with the engine running or the ignition switched on. Intermittent mode. When reverse gear is engaged, continuous operation is switched on automatically Capacity 2 Cleaning the rear window Approx. 6.3 US quarts/6 liters. Do not use washing mechanisms when the washer fluid reservoir is empty, otherwise you will damage the washer pump.
Driving One lever for all functions Accelerating with lever Accelerate slightly: Press the lever up to the resistance point, arrow 1, until the desired speed is reached. Accelerate more rapidly: Press the lever beyond the resistance point, arrow 1, until the desired speed is reached.
At a glance Accelerating does not deactivate the cruise control. After releasing the accelerator pedal, the stored speed is reached and maintained again. Warning lamp Controls The warning lamp lights up if the cruise control has been deactivated automatically, e.g. by a control intervention of the DSC. A message appears on the Control Display. Driving tips Resuming stored speed Briefly press the button, arrow 4. The stored speed is resumed and maintained.
Everything under control Everything under control Odometer, outside temperature display, clock Retrieving date Press the button on turn signal lever upward; the date appears. 1 Knob in the instrument panel To set the date, refer to page 89. 2 Time, outside temperature, and date 3 Odometer and trip odometer Pressing the button upward or downward several times changes the display between clock, outside temperature, date, and Check Control messages, refer to page 86.
At a glance Engine oil temperature* When the engine is at operating temperature, the engine oil temperature is between approx. 1707/806 and approx. 2507/1206. When the engine oil temperature is too high, a warning lamp lights up in the instrument panel. Driving tips Controls Tachometer Do not operate the engine with the needle in the red overspeed zone of the gauge, refer to arrow. At high revs in this range, the flow of fuel is interrupted to protect the engine.
Everything under control Fuel gauge The following information is displayed: > Cruising range > Average speed > Average fuel consumption > BMW X6: Dynamic Performance Control, refer to page 97 Cruising range Fuel tank capacity: approx. 22.5 US gal/ 85 liters. You will find information on refueling on page 244. Displays the estimated cruising range available with the remaining fuel. The range is projected based on the driving style over the last 20 miles/ 30 km.
Entering a distance manually 1. Select "Distance to dest. " and press the controller. 4. Select "Onboard info" and press the controller. 2. Turn the controller to select the distance to your destination. Trip computer* The trip computer is suitable, for example, for a vacation trip. 1. Open the start menu. > Estimated time of arrival at destination and remaining distance: 2. Open "Navigation". Without navigation system*: Open "Car Data". > Entering a distance manually in the computer, see below. 3.
Everything under control Starting or stopping the trip computer, or resetting all values: Service requirements 1. Select "Set" and press the controller. 2. Select the desired menu item. 3. Press the controller. Display options You can display the computer or the trip computer in the assistance window. 1. Move the controller to the right to change to the assistance window and press the controller.
At a glance Knob for selecting display 6 Rear brake pads 2 Service requirements 7 Brake fluid 3 Engine oil 4 Legally mandated inspections* 5 Front brake pads The sequence of the displayed maintenance items can vary. First the data for the next maintenance are displayed. Additional information You can select a display of more detailed information on the maintenance scope on the Control Display. For operating principle refer to page 16. 5. Change to upper field if necessary.
Everything under control 6. Select "Status" and press the controller. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Info sources" and press the controller. 4. Select "Service Info" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Service requirements" is selected and press the controller. The display shows a list of selected service and maintenance procedures, as well as legally mandated inspections. 6.
Indicator and warning lamps The indicator and warning lamps can light up in different combinations and colors. Text messages at the bottom edge of the Control Display explain the meaning of the displayed indicator and warning lamps. You can display additional information on most Check Control messages later, e.g. on the cause of the malfunction and on corresponding need for action, see below. In the case of corresponding urgency, this information is displayed immediately when the related lamp lights up.
Everything under control Some Check Control messages are displayed until the malfunctions have been rectified. They cannot be hidden. If a number of malfunctions occur simultaneously, they are displayed in succession. Other messages are automatically hidden after approx. 20 seconds, but remain stored. Displaying stored Check Control messages 1. Press the button on the turn signal lever downward. "CHECK OK" or the stored Check Control messages appear in the display.
Stopwatch You can enter a speed and a Check Control message indicates when you have reached this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area. You are only warned of reaching this speed a second time if your vehicle speed falls below it again by at least 3 mph/5 km/h. iDrive, for operating principle refer to page 16. 2. Open "Navigation". Without navigation system*: Open "Car Data". 3. Select "Car Data" and press the controller. 4.
Everything under control Settings on Control Display iDrive, for operating principle refer to page 16. 1. Press the button once or twice until the start menu appears. 3. Turn the controller until "Time" is selected and press the controller. 2. Press the controller to open the menu. 3. Turn the controller until "Settings" is selected and press the controller. 4. Turn the controller until "Set time" is selected and press the controller. Setting time 1.
1. Select "Time format" and press the controller. 4. Select "Display settings" and press the controller. 2. Select the desired format and press the controller. 5. Change to upper field if necessary. Turn the controller until "Brightness" is selected and press the controller. 7. Turn the controller until the desired setting is selected. 2. Select "Set date" and press the controller.The first section of the date display is highlighted, in this case the month.
Everything under control Volume of warning tones* On vehicles equipped with a single drive, you can increase or decrease the volume of the warning tones, e.g. for the safety belt reminder, compared to the entertainment sound output. The warning tones have a specified minimum and maximum volume that cannot be dropped below or exceeded. 6. Select the menu item to be set and press the controller. 7. Select the desired unit of measure and press the controller. 1.
Automatic activation Whenever the engine is running or the ignition is on, each time you move the selector lever into position R, the PDC system is activated after approx. 1 second. Wait this short period before driving off. Manual activation An intermittent tone is interrupted after approx.
Technology for comfort, convenience and safety PDC with visual warning You can also have the system show distances to objects on the Control Display. Objects that are farther away are already shown there before a signal tone sounds. The setting is stored for the remote control currently in use. 6. Turn the controller until "View selection" is selected and press the controller. If the vehicle is equipped with a rear view camera, refer to Displays on page 95.
Press the button again; the LED goes out. The concept They can only be activated when the liftgate is completely closed. Pathway lines The pathway lines are shown in the picture of the rear view camera. They help you to estimate the space required when parking and maneuvering on level roads. Switching on Automatically With the engine running, shift into reverse.
Technology for comfort, convenience and safety Parking using pathway and turning circle lines 1. Position the vehicle so that the turning lines guide within the limits of the parking space. Obstacle marking Spatially shaped markings are shown in the picture of the rear view camera. Their stepped colors correspond to the markings of the Park Distance Control and support you in estimating the distance to the object shown. 2.
1. Select "Maneuvering aids" and press the controller, refer to Activating driver assistance functions. At a glance Selecting displays The setting is stored for the remote control currently in use. The settings are stored for the remote control currently in use. The picture of the rear view camera and PDC is hidden when the vehicle is stopped, the transmission is in R or D, and you disconnect the driver's safety belt and open the driver's door.
Technology for comfort, convenience and safety Cleaning rear view camera est possible braking distance during full braking. This system exploits all of the benefits provided by ABS. Do not reduce the pressure on the brake pedal for the duration of the full braking. DSC Dynamic Stability Control The lens of the rear view camera is located on the liftgate. The picture quality of the rear view camera may be impaired by dirt. Clean the lens with a moist, nonabrasive cloth.
The indicator lamps light up: DSC is deactivated. DTC Dynamic Traction Control DTC is a version of DSC in which the drive output is optimized for particular road conditions, e.g. unplowed snow-covered roads. The system assures the maximal drive output, but with reduced driving stability. It is therefore necessary to drive with appropriate caution.
Technology for comfort, convenience and safety 15 mph/25 km/h. You can specify a target speed within the same range by using the lever of the cruise control. With downhill grade over 10Ξ you can reduce the speed to approx. 3 mph/4 km/h. Pull the lever of the cruise control beyond the resistance point, arrow 3. Press the BC button on the turn signal lever repeatedly until the display appears, refer to arrow. The drive train and wheels are schematically depicted.
HDC display Malfunction HDC is temporarily unavailable in the following situations due to a high brake temperature: > The LED in the button and the display HDC go out during HDC operation. > The LED in the button and the HDC display do not light up when the button is pressed. Press the button. The system switches between the two chassis and suspension tuning settings. Malfunction of driving stability control systems > Sport: The LED in the button lights up and SPORT is displayed in the instrument panel.
Technology for comfort, convenience and safety longer holds the vehicle after approx. 2 seconds and it begins to roll back.< The initialization must be repeated after each time the tire inflation pressure is corrected and after every tire or wheel change.< Self-leveling suspension* System limits Malfunction The warning lamp for self-leveling suspension lights up yellow and a message is shown on the Control Display. A malfunction has occurred in the selfleveling suspension. Stop and check the vehicle.
7. Select "Reset" and press the controller. 8. Select "Yes" and press the controller. The message "resetting FTM …" is displayed. > With a light load: 1 to 2 persons without luggage: approx. 155 miles/250 km > With a medium load: 2 persons, cargo bay full, or 4 persons without luggage: approx. 95 miles/150 km > With a full load: 4 or more persons, cargo bay full: approx. 30 miles/50 km 9. Start to drive. The initialization finishes during driving. Indication of a flat tire The warning lamp lights up red.
Technology for comfort, convenience and safety the tire inflation pressure has dropped considerably in one or several tires. Function requirements In order to assure the reliable reporting of a flat tire, the system must have been reset with the correct tire inflation pressure. Always use wheels with TPM electronics, otherwise fault-free operation of the system is not ensured. Reset the system again after each correction of the tire inflation pressure and after every tire or wheel change.
> With a medium load: 2 persons, cargo bay full, or 4 persons without luggage: approx. 95 miles/150 km > With a full load: 4 or more persons, cargo bay full: approx. 30 miles/50 km 9. Start to drive. The tires are shown in gray and "Resetting TPM..." is displayed. After a few minutes of driving, the set tire inflation pressures in the tires are applied as the set values to be monitored. Resetting finishes during driving. The tires are shown in green on the Control Display.
Technology for comfort, convenience and safety > If a wheel without TPM electronics is mounted, e.g.
At a glance BMW X6 BMW X5 On the left: normal braking. Controls Brake force display* On the right: heavy braking. Driving tips On the left: normal braking. On the right: heavy braking. Front airbags 2 Head-level airbags in front and rear 3 Side airbags in backrests Protective action To ensure that the safety systems continue to provide optimized protection, observe the adjustment instructions on page 48.
Technology for comfort, convenience and safety the upholstery in the center of the steering wheel, on the instrument cluster, the doors, and the roof pillars as well as the sides of the headliner. Do not attempt to remove or dismantle the steering wheel. Do not touch the individual components immediately after the system has been triggered, because there is a danger of burns.
At a glance The front and side airbags on the front passenger side are activated. > The indicator lamp does not light up when the seat is empty. However, the front and side airbags on the front passenger side are not activated. Driving tips Controls Operational readiness of airbag system Press the button. Airbag system malfunction > Warning lamp does not light up from radio readiness. > Warning lamp lights up continuously.
Technology for comfort, convenience and safety 5. Change to upper field if necessary. Turn the controller until "Head-Up Display" is selected and press the controller. 6. Change into the second field from the top. Turn the controller until "Brightness / Position" is selected and press the controller. 6. Change into the second field from the top. Turn the controller until "Head-Up Display" is selected and press the controller. 7. Select desired information of Head-Up Display. 7.
At a glance Care instructions Important information on this topic is provided on page 268. 109 Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips Controls Only clean the cover of the Head-Up Display with a soft, lint-free cloth or with a display cleaning cloth, otherwise damage may result.
Lamps Lamps Parking lamps/low beams 0 Lights off and daytime driving lamps* 1 Parking lamps and daytime driving lamps* 2 Low beams and welcome lamps 3 Automatic headlamp control*, daytime driving lamps*, welcome lamps and Adaptive Head Light* If you open the driver's door with the ignition switched off, the exterior lighting is automatically switched off when the light switch is in position 0, 2 or 3. If necessary, switch on the parking lamps, switch position 1.
6. Select "Pathway lighting" and press the controller. 7. Turn the controller to select the desired duration. At a glance 5. Change to upper field if necessary. Turn the controller until "Lighting" is selected and press the controller. The welcome lamps are switched on. The setting is stored for the remote control currently in use. Pathway lighting When you activate the headlamp flasher after parking the vehicle and switching off the lamps, the low beams will come on for a brief period.
Lamps Adaptive Head Light* Roadside parking lamps, left or right* The concept You also enjoy the option of lighting up just one side of your vehicle when parking. Adaptive Head Light is a variable headlamp control system that enables better illumination of the road surface. Depending on the steering angle and other parameters, the light from the headlamp follows the course of the road. In tight curves, e.g.
At a glance You can control the lighting intensity by using the serrated dial. Reading lamps are provided in the front and rear* adjacent to the interior lamps. Press the button to switch the lamps on and off. Interior lamps Navigation The interior lamps, footwell lamps*, door entry lighting*, cargo bay lamps, and the courtesy lamps* are controlled automatically.
Climate Climate 1 Air toward the windshield and side windows 2 Air for the upper body region, refer to Front ventilation on page 118 3 Air to footwell 4 Automatic climate control with 2-zone control, refer to page 115 Automatic climate control with 4-zone control, refer to page 119 114 Online Edition for Part no.
At a glance Temperature, left side of passenger compartment 10 Manual air volume, switching off automatic climate control, residual heat 3 AUTO program 11 Rear window defroster 4 Temperature, right side of passenger compartment 12 Defrosting windows and removing condensation 5 Maximum cooling 6 Seat heating and ventilation, front passenger side 56 13 Air grill for interior temperature sensor – please keep clear and unobstructed 7 Manual air distribution, front passenger side 8 Switching coo
Climate 3. Select "Automatic programs" and press the controller. or left repeatedly until the driver's or front passenger side is selected. 5. Move the controller to select the field. 6. Turn the controller to adjust the temperature. 4. Select the desired intensity and press the controller. The selected intensity level of the automatic program is switched on. Temperature Set the desired temperature individually on the driver's and front passenger side.
1. Press the button. This opens the start menu. 2. Move the controller to the left to open "Climate". The automatic mode for the air volume remains effective with manual air distribution. Switching cooling function on and off The cooling function cools and dehumidifies the incoming air before also reheating it as required, according to the temperature setting. This function is only available when the engine is running. 3. Select "Vent settings" and press the controller.
Climate By pressing the button repeatedly, you can request three operating modes: Switching automatic climate control on and off > LED off: outside air flows in continuously. > Left LED on, AUC mode: the system detects pollutants in the outside air and shuts off the supply as needed. You can select the lowest blower speed by pressing and holding the left side. Pressing again switches off the automatic climate control.
heating is switched off, the blower can be used to recirculate the air within the vehicle, e.g. at high temperatures. To do this, turn the serrated dial 1 toward the rear and switch on the blower, button 2.< At a glance Ventilation in rear > Turn toward red: warmer 3 Levers to change the air vent direction BMW X5: heating and ventilation, 3rd row seats The air in the area of the 3rd row seats can be heated or recirculated.
Climate The current setting for the temperature and the air volume is shown on display 3. Activating iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Move the controller to the left to open "Climate". 3. Select "Rear climate control" and press the controller. Temperature Set the desired temperature individually on the left and right side.
It is ready to use in the parked car mode at any outside temperature.
Climate The symbol on the display of the automatic climate control flashes. Preselecting activation times Activating activation time Move the controller to the left or right to select "Timer 1" or "Timer 2" and press the controller. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Move the controller to the left to open "Climate". 3. Select "Parked car operation" and press the controller. 4. Select "Activation time" and press the controller. 5.
HomeLink is a registered trademark of Johnson Controls, Inc.< Controls Programming To prevent possible damage or injury, before programming or using the integrated universal remote control, always inspect the immediate area to make certain that no people, animals or objects are within the travel range of the device. Also, comply with the safety precautions of the original hand-held transmitter.
Practical interior accessories The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter. The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter. You can operate the device when the engine is running or when the ignition is switched on. Should you have questions, please contact your BMW Sports Activity Vehicle Center.
At a glance The display indicates the cardinal or intercardinal direction in which you are currently driving. Operating principle Controls You can run various functions by pressing the adjustment button with a pointed object, e.g. a ball-point pen etc.
Practical interior accessories Calibrating digital compass Calibrate the digital compass In the following situations: > The wrong cardinal direction appears on the display. > The cardinal direction displayed does not change despite a change in the direction of travel. > Not all cardinal directions are displayed. Roller sun blinds for rear side windows* Pull the loop of the roller sun blind and hook onto bracket.
Opening cover BMW X5 At a glance A storage compartment is located under the armrest between the front seats and, depending on the vehicle's equipment, also a cover for the mobile phone bracket or the snap-in adapter. Also refer to page 220. If you do so, they could cause personal injury to occupants during braking or evasive maneuvers.< Clothes hooks are located near the grab handles in the rear.
Practical interior accessories Rear BMW X6 BMW X5 Slide the cover forward. Unlock the center armrest with the button in the lower section of the opening and fold down. Remove the beverage container before folding the rear seat backrest forward or using the ski bag; otherwise it may cause damage.< Ashtray Front Press the button; the cover folds forward. With the 3rd row seats*: To open the cover, slide it forward. Fold down the center armrest. Press the button; the cup holders are opened.
At a glance Refer to Cigarette lighter, front. Slide the cover back. Remove the insert to empty. Connecting electrical devices Sockets Lighter Front Communications Entertainment With the engine running or the ignition switched on, the cigarette lighter socket can be used as a power outlet for hand flashlights, car vacuum cleaners, etc., with power ratings of up to approx. 200 W at 12 V. Avoid damaging the socket due to inserting plugs of different shapes or sizes.
Practical interior accessories In rear center console Rear center armrest BMW X6 and BMW X5 with 3rd row seats* Depending on your vehicle's equipment package, the socket in the rear is covered with a cap or equipped with a lighter. Refer to Cigarette lighter, front, page 129. Access to socket: Remove cap or lighter. Pull on the loop and fold down the center armrest.
1. Unlock the case with the button, arrow 1. Deploy cargo bay cover by pulling back. Do not place heavy or hard objects on the cargo bay cover. If you do so, they may pose a danger to vehicle occupants during braking or evasive maneuvers.< Removing Installing When installing, proceed in the opposite order of removal. 1. Grasp retracted cargo bay cover underneath the upper fold on both sides. 2. Pull the cover back out of the side brackets. 3.
Practical interior accessories Installing When installing, proceed in the opposite order of removal. 1. Set the cargo bay cover into place on the left and right sides. 2. Lift the back of the cover slightly and slide forward until it snaps into the two side brackets. Expanding cargo bay The rear seat backrest is divided. You can fold down both sides separately in order to expand the cargo bay.
> between the rear seat backrest and the telescopic rail > between the telescopic rail and the retaining strap Positioning cargo between telescopic rail and retaining strap: 1. Lay the cargo on the telescopic rail. Press the button, arrow 1, and route the retaining strap around the cargo, arrow 2. 1 Brackets 2 Telescopic rail 3 Notch in the cargo bay rail Mounting brackets The two brackets are connected with a telescopic rail. 1.
Practical interior accessories Ski bag* The ski bag is designed for safe, clean transport of up to 4 pairs of standard skis or up to 2 snowboards. BMW X6: attach the hook of the ski bag retaining strap to the eyelet on the rear seat backrest. With the ski bag you can stow skis with a length of up to 6.9 ft/2.10 m. When skis of 6.9 ft/ 2.10 m in length are loaded, the ski bag will tend to contract, reducing its overall capacity.
At a glance Removing ski bag Driving tips Controls The ski bag can be completely removed, e.g. for faster drying or to allow you to put it to other uses. 1. Pull the handle toward the front, arrow 1. 2. Take out the ski bag upward, arrow 2. 3. Close the cover in the cargo bay. 135 Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG Reference Mobility Communications Entertainment Navigation Details on various inserts are available from your BMW Sports Activity Vehicle Center.
Online Edition for Part no.
Driving tips This section is designed to provide you with extra support by supplying information useful in dealing with specific driving and operating conditions. Online Edition for Part no.
Things to remember when driving Things to remember when driving Break-in period Moving parts need breaking-in time to adjust to each other. To ensure that your vehicle continues to provide optimized economy of operation throughout an extended service life, we request that you devote careful attention to the following section. Following part replacement Observe the break-in instructions again if components mentioned above must be replaced after subsequent driving operation.
Taking advantage of coasting The flow of fuel is interrupted when coasting. Switching off engine during longer stops Switch off the engine at longer stops such as traffic signals, railroad crossings, or in traffic jams. Even having the engine switched off for approx. 4 seconds results in fuel savings. Switching off functions currently not required Functions such as air conditioning, seat heating, or rear window defrosting consume a lot of energy and require additional fuel.
Things to remember when driving planing, and is characterized by a partial or complete loss of contact between the tires and the road surface, ultimately undermining your ability to steer and brake the vehicle.< gear in which the least braking is required. Even light but consistent pressure on the brake pedal can lead to high temperatures, brake wear and possibly even brake failure.
With comfort access* Insert the remote control into the ignition lock. The engine can be switched off in transmission position N, also refer to page 41. Loading To avoid loading the tires beyond their approved carrying capacity, never overload the vehicle. Overloading can lead to overheating and increases the rate at which damage develops inside the tires. The ultimate result can assume the form of a sudden blow-out.< Make sure that no fluids leak in the cargo bay; otherwise the vehicle could be damaged.
Things to remember when driving BMW X6 BMW X6: The permissible load is the total of the weight of occupants and cargo/luggage. The greater the weight of occupants, the less cargo/luggage can be transported. Stowing cargo BMW X5 > Load heavy cargo as far forward and as low as possible, placing it directly behind the backrest. > Cover sharp edges and corners.
BMW X6 Loading roof-mounted luggage rack Because roof racks raise the vehicle's center of gravity when loaded, they have a major effect on its handling and steering response. You should therefore always remember not to exceed the approved roof load capacity, the approved gross vehicle weight or the axle weights when loading the rack. > For larger and heavier pieces, heavy-duty cargo straps* are available from your BMW Sports Activity Vehicle Center.
Things to remember when driving Driving on poor roads Your BMW is at home on all roads and surfaces. It combines a 4-wheel drive system with the advantages of a normal passenger car. Do not drive on unpaved terrain, as otherwise the vehicle may be damaged.
145 Reference Online Edition for Part no.
Online Edition for Part no.
Navigation This chapter describes how you can enter destinations and specify your route so that your navigation system guides you reliably to your destination. Online Edition for Part no.
Starting navigation system Starting navigation system* Your navigation system can use satellites to ascertain the precise position of your vehicle and guide you reliably to any destination you enter. Display in assistance window Navigation DVD 1. Move the controller to the right to change to the assistance window. The navigation system requires a special navigation DVD. The latest version is available at your BMW Sports Activity Vehicle Center.
At a glance 4. Turn the controller until "Language / Units" is selected and press the controller. 5. Change to upper field if necessary. Turn the controller until "Languages" is selected and press the controller. Driving tips Controls 6. Select "Arrow display pop-up instructions" and press the controller. 149 Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG Reference Mobility Communications Entertainment Navigation The arrow view appears in the assistance window.
Destination entry Destination entry In entering your destination you can select from among the following options: > Entering a destination manually, see below > Entering destination via voice*, refer to page 153 > Selecting destination using information, refer to page 156 Opening navigation system iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Move the controller to the right to open "Navigation".
2. Select the country of destination and press the controller. In order to be able to start the destination guidance, at least the town/city of the destination or its zip code must be entered. Entering destination via town/city name 3. Select "Enter address" and press the controller. 1. Select "Town / City" or the displayed town/ city and press the controller. 2. Select the starting letter and press the controller. A list of all towns/cities starting with this letter appears on the Control Display. 3.
Destination entry 4. If necessary, enter more letters. The list gradually grows smaller each time you enter a new letter. > Enter blank space if necessary: Select the symbol and press the controller. > Enter a blank space: Select the symbol and press the controller. > Delete individual numbers or letters: Move the controller toward the right to select and press the controller. > Delete all numbers or letters: Move the controller toward the right to select and press the controller longer. 3.
> Select "Start guidance" and press the controller. Destination guidance starts immediately. 2. Turn the controller to the right until the request for the entry of a street in the country appears and press the controller. > If the destination guidance does not need to be started immediately: Select "Add to destination list" and press the controller. The destination is stored in the destination list, refer to page 157.
Destination entry Selecting country 1. Wait for the system to ask for the country of destination. 2. Say the name of the country of destination. Say the name of the country of destination in the language of the voice activation system. Entering destination The town/city can also be selected from the list via iDrive: Turn the controller until the destination is selected and press the controller.
3. Select "Input map" and press the controller. Entering street and house number At a glance Select this entry with {Yes} if necessary. Then select the desired city/town in this list.< The street is entered in the same way as the destination. Controls To enter the house number: 1. {House number} 2. Say the house number. {Start guidance} Destination guidance starts immediately.
Destination entry > "Return to map" changes back to the "Input map". > Exit the menu. 4. Press the controller. 5. Make your selection, e.g. "Hotels and restaurants", and press the controller. 7. Press the controller. The map for the destination entry can also be displayed in the map display: Select the symbol and press the controller. Selecting destination using information 6. Enter search criteria if necessary, e.g. the maximum distance from the current location. 7.
At a glance > To start a new search: Select the symbol and press the controller. To exit from the menu: Select the arrow and press the controller. This symbol indicates the current destination during destination guidance. To display additional destinations from the destination list: Turn the controller. Applying destination in destination guidance 1. Select the desired destination and press the controller. The symbols are hidden. To display the symbols: Select "Show map icons" and press the controller.
Destination entry > Delete all entries: Select "Delete list". The destination guidance is switched off. > Change entry: Select "Edit". For operation, refer to Entering destination via town/city name, page 151. 3. Press the controller. Address book Opening address book iDrive, for operating principle refer to page 16. 4. Enter name and address, also refer to Entering a destination manually, page 151. 5. Select "Store in address book" and press the controller. The entry is stored in the address book.
1. Select "Address book" and press the controller. 2. Select the entry and press the controller. 3. Select "Delete address" and press the controller. 2. Select the entry and press the controller. To start the destination guidance: Select "Start guidance" and press the controller. Deleting all destinations from address book 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. Changing destinations from address book 1.
Destination entry Selecting route Home address You can store your current position or the current destination as the home address in the address book. This entry occupies the second position in the address book. Storing home address 1. Select "Address book" and press the controller. 2. Change into the third field from the top. Turn the controller until "Home address" is selected and press the controller. You can influence the calculated route by choosing certain route criteria.
The route criterion is highlighted. 5. If necessary, select an additional route criterion and then press the controller: > "Dynamic route" Automatic changing of the route in case of traffic obstructions. Depending on road type and the kind and extent of the traffic obstruction, the route can also be calculated so that you travel through the traffic obstruction. > "Avoid tollroads" Tollroads are avoided where possible. > "Avoid ferries" Ferries are avoided where possible.
Destination guidance Destination guidance Starting destination guidance by spoken instructions and the display of the direction arrow. Via programmable memory buttons Via iDrive iDrive, for operating principle refer to page 16. 1. Change to upper field if necessary. Turn the controller until "Navigation" is selected and press the controller. 2. Select a destination from the destination list and press the controller or enter a new destination, refer to page 150. Press the ...
At a glance 4 Arrow to destination from a bird's eye view 5 Distance to the next change of direction 6 Current position 7 Direction of travel > Outline arrow: Destination guidance on the calculated route Displaying route > Solid arrow: Arrow shows the route to be calculated from a bird's eye view when the vehicle is not located in an area contained on the navigation DVD, e.g. in a multilevel parking lot. You have the option of displaying various views of the route during destination guidance.
Destination guidance To exit from the menu: Select the arrow and press the controller. 5 > > Displaying map view You can have your current position displayed on a map. After starting the destination guidance, the planned route is shown on the map. 1. Select "Navigation" and press the controller. 2. Change into the fourth field from the top.
5. Change to upper field if necessary. Turn the controller until "Languages" is selected and press the controller. 6. Select "Navigation voice instructions" and press the controller. Voice instructions can be switched on or off during the destination guidance in the arrow or map view: Select the symbol and press the controller. To switch the voice instructions on and off at any time: 1. Press the button. This opens the start menu. The voice instructions are switched on.
Destination guidance Setting volume of voice instructions The route is recalculated. The volume can only be adjusted while a voice instruction is being output. To exit from the menu without changing the route: Select the arrow and press the controller. 1. Repeat the last voice instruction, if necessary. 2. Turn the knob during the voice instruction to select the desired volume. Traffic information* This volume is independent of the volume of the audio sources.
5. Select "Traffic Info" and press the controller. First the traffic information along the planned route is shown sorted according to the distance to the current vehicle position. With destination guidance switched off At a glance Driving tips Controls During destination guidance, the traffic information on the planned route is marked with a yellow diamond. "AUTO": automatic selection of the Traffic Info station with the strongest reception.
Destination guidance Displaying detailed traffic information Select traffic information from the displayed list and press the controller. Road closed Slow traffic Traffic back up Stopped traffic Icy roads Uneven surface To exit from the menu: Select the arrow and press the controller. Symbols for traffic information Traffic event with map scales greater than 5 miles/10 km, arrow points in the direction of travel concerned.
2. Change into the fourth field from the top. Turn the controller until "Current position" is selected and press the controller. The current position of your BMW is displayed. Select "Detour" and press the controller. The navigation system determines a new route to bypass the traffic congestion. This information is displayed even if you have activated a different function on the Control Display. If the navigation system is unable to identify a town or city, your current map coordinates will appear.
What to do if … What to do if … What to do if … > a navigation DVD is inserted, but an instruction to insert the DVD appears on the Control Display? The navigation DVD may not be the correct DVD for the navigation system. This information is indicated on the DVD label.
171 Reference Online Edition for Part no.
Online Edition for Part no.
Entertainment Operation of the radio and CD as well as their tone settings are described in this chapter. Online Edition for Part no.
On/Off and settings On/Off and settings The following audio sources have shared controls and setting options: Equipment with two drives > Radio > CD player > CD changer* Controls The audio sources can be controlled using: > Buttons in the area of the CD player 1 > iDrive > Press: switch on/off. When the system is switched on, the most recently selected radio station or CD track is played.
> "CD": CD player or changer* > "AUX": AUX-In connection, USB audio interface* > "Set": depending on the audio source, other adjustments can be made, e.g. with the radio: update station with strongest reception, store station, tone control, sample stations. From another menu, you can change directly to the screen last displayed, refer to Comfort opening of menu items, page 18.< From radio readiness, the selected audio source is stored for the remote control currently in use.
On/Off and settings 2. Move the controller to the left or right to select "Treble" or "Bass". 2. Turn the controller: The adjustment is applied; the field can be changed. 3. Turn the controller until the desired setting is selected. When equipped with a single drive: Balance and fader 1. Select "Volume settings" and press the controller. You can adjust the volume distribution in the same manner as "Treble / Bass". > "Balance": left/right volume distribution 2.
You can choose between stereo and multichannel playback, surround. 2. Move the controller to the left or right to select the desired frequency range. 3. Turn the controller until the desired setting is selected. 2. Select "Stereo" or "Surround". Resetting tone settings You can reset all tone settings to the default settings. Driving tips Controls 1. Select "Surround Settings" and press the controller. At a glance Professional HiFi System* 3.
Radio Radio Your radio provides reception of the FM and AM wavebands. Changing stations Listening to radio Turn the controller. Buttons on CD player Press the knob if the sound output is switched off. iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Move the controller backwards to open "Entertainment". 3. Change to upper field if necessary. Select "FM" or "AM". Press the button for the corresponding direction.
Selecting frequency manually 1. Change into the second field from the top. With "Manual" you can select stations that can be received in addition to those displayed. 2. Select the selection criterion and press the controller. 1. Select "FM" or "AM" and press the controller. At a glance To change the selection criterion: Driving tips 3. Select "Manual" and press the controller. Sampling stations, scan 2. Press the controller. Other menu items are displayed. 3.
Radio 5. Select "Autostore" and press the controller. 5. Select "Store" and press the controller. The display of the stations with the strongest reception is updated. The frequencies of the stations are displayed. 6. Turn the controller until the desired memory position is selected. Storing stations "Presets" is displayed. 7. Press the controller. The station is stored. Via iDrive 1. Select "FM" or "AM" and press the controller. 2. Change into the second field from the top.
Many stations transmit both analog and digital signals. You can receive these stations digitally and with improved sound quality. At a glance High Definition Radio* 3. Turn the controller until "Settings" is selected and press the controller. 4. Select "Audio" and press the controller. RDS Radio Data System In the FM frequency range, additional information is transmitted via RDS. If the reception conditions are good, the station names are shown on the Control Display.
Radio With some stations the digital signals are not transmitted simultaneously with the analog signals. If you are in an area in which the selected station is not continuously received digitally, playback changes between analog and digital reception. This can result in repetitions or interruptions. In this case it may be advisable to deactivate digital radio reception. 1. Select "FM" or "AM" and press the controller.
Weather Service. Details are also provided on the Internet at www.nws.noaa.gov. With the digital stations, additional information on the current track is displayed, e.g. the name of the artist. Calling up weather news flashes 1. Select a station and press the controller. 1. Select "WB" and press the controller. At a glance Displaying additional information 2. Select a station. The station for weather news flashes may be unavailable in some regions.
Satellite radio Satellite radio* You can receive over 100 different channels with high sound quality. The channels are offered to you in predefined packages. To receive the channels of your choice, you must have this package enabled. With this new technology the signal may fail, causing interruptions in reception.< Enabling or disabling channels iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. Enabling 1.
5. Select a channel marked with this symbol. > "Presets": Up to twelve channels you have stored previously. 7. Select "Details" and press the controller. Navigation > "All channels": All channels are displayed. > "Categories": All channels, sorted by categories, e.g. news, jazz. Additional information The name of the channel and additional information on the current track are displayed, e.g. the name of the artist. 3. Press the controller. 1 Artist 2 Track Mobility 4.
Satellite radio Storing channel Notes 1. Select desired channel. If no signal can be received for more than four seconds, a message is displayed on the Control Display. 2. Press the controller. Other menu items are displayed. 3. Select "Store" and press the controller. Reception may not be possible for certain reasons, e.g. environmental influences or topographical conditions. The satellite radio has no influence on this.
3. Change to upper field if necessary. Select "CD" and press the controller. Navigation Starting CD player Inserting CD Insert the CD into the drive with the labeled side up. The CD is automatically pulled in. Playback starts automatically if the sound output is on. For CDs with compressed audio files, it can take up to approx. 1 minute to read in the data depending on the directory structure. Playback starts automatically if the sound output is switched on.
CD player and CD changer 4. Change to the second field from the top if necessary. Select the desired CD and press the controller. Compressed audio files At the end of the last track, the next CD will be selected. 2. Select the track and press the controller. 1. Select the directory if necessary and press the controller. Via programmable memory buttons You can store a CD compartment of the CD changer on the programmable memory buttons. To start the CD changer, refer to page 21.
1. Press the controller. 2. Select "Scan" and press the controller. This cancels sampling of the tracks, and the player remains on the current track. Compressed audio files 1. Select the current track and press the controller. 2. Select the desired menu item: The information for the current track are displayed. > To sample all tracks of the current directory, select "Scan directory" and press the controller. The setting is stored for the remote control currently in use.
CD player and CD changer 2. Select "Repeat" and press the controller. Random play sequence In this mode, the tracks on the current CD are played once in a random sequence. 1. Select "Set" and press the controller. Other menu items are displayed. 2. Select "Random" and press the controller. To stop random function: 1. Press the controller. 2. Select "Random" and press the controller. The current track on the CD is repeated. To stop repeating: Compressed audio files 1. Press the controller again. 1.
Do not continue to push on the CD; this may cause it to jam and prevent it from being able to eject again.< 4. To fill additional CD compartments: Repeat steps 1 to 3. At a glance CD changer 3. Wait until the CD has been pulled in. LEDs on CD bay Flash when the CD can be inserted. 2 Buttons for CD compartments LED lights up when CD compartment is filled. Filling CD changer 1. Press the button. The LED on the first empty compartment flashes. 2. Select another CD compartment if necessary: Press the ...
CD player and CD changer Notes BMW CD/DVD players and changers are officially designated Class 1 laser products. Do not operate if the cover is damaged, otherwise severe eye damage can result. Do not use self-recorded CDs/DVDs with labels applied as these can become detached during playback due to heat buildup and can cause irreparable damage to the device. Only use round CDs/DVDs with a standard diameter of 4.7 in/12 cm and do not play CDs/ DVDs with an adapter, e.g.
Filling empty DVD compartments The BMW DVD changer for six DVDs is installed in the glove compartment. 1. Hold down the button. The LEDs on the empty DVD compartments flash. Controls and displays 2. When the LEDs 1 on the DVD bay flash, insert an individual DVD. The DVD is automatically pulled in and inserted into the first available DVD compartment. Do not continue to push on the DVDs; this may cause them to jam and prevent them from being able to eject again.
DVD changer Removing all DVDs from DVD changer 1. Hold down the button. The DVDs are pushed partially out of the DVD changer in sequence. 2. Remove the DVDs individually. Malfunctions If all of the LEDs on the DVD changer flash rapidly, then a malfunction is occurring. In this case, proceed as follows. 1. Press the button or button. The DVD last inserted is ejected. 2. Remove the DVD. The DVD changer tests the DVD compartments and the rapid flashing of the LEDs stops.
3. Press the controller repeatedly to increase the speed of the fast forward/reverse. The DVD playback will be distorted. During playback: Forward/reverse using controller 1. Press the controller. 1. Turn the controller during playback. Fast forward/reverse is interrupted. The DVD control is displayed. Controls Select the symbol and press the controller. The DVD will start play at the point selected. 2. Turn the controller further. The speed is increased. 3. Release the controller.
DVD changer Adjusting brightness and contrast DVD format 1. Press the controller during playback. 1. Press the controller during playback. 2. Select "SET" and press the controller. 2. Select "SET" and press the controller. 3. Select "Video settings" and press the controller. 3. Select "DVD format" and press the controller. 4. Select "Brightness" or "Contrast" and press the controller. > "Standard" > "Zoom": full-screen playback Selecting language 1. Press the controller during playback. 2.
1. Press the controller during playback. Selecting title 3. Make your selection in the DVD-specific menu. To do so, move the controller in the corresponding direction in order to select the menu items and then press the controller. Selecting viewing angle Notes or symbols that appear during the playback of a film generally indicate the availability of different camera angles. These are usually only briefly available. 1. Press the controller during playback. 2. Select "SET" and press the controller. 3.
DVD changer 4. Change into the second field if necessary, select the desired DVD and press the controller. The behavior during playback of the DVD can differ, depending on the DVD. It may not be possible to play some DVDs or the playback may stop before the end. In this case, the system usually skips to the next DVD in the DVD changer.< Selecting chapter Select the chapter by turning the controller. Displaying DVD audio contents DVDs are usually divided into titles that are divided into chapters.
DTS "DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc. Driving tips 3. Select the desired language and press the controller. Navigation The different languages of the DVD are displayed. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", "MLP Lossless" and the double-D symbol are registered trademarks of Dolby Laboratories. At a glance Dolby Controls permissible for correspondingly protected media to be produced for private use.
AUX-In connection AUX-In connection You can connect an external audio device, e.g. an MP3 player, and play the sound via the vehicle speakers. The sound can be adjusted via iDrive. 3. Change to upper field if necessary. Turn the controller until "AUX" is selected and press the controller. Connecting Open the lid of the center armrest. 4. Select "AUX IN" and press the controller. 5. Adjust volume and sound if necessary. 1 Connection for audio playback: TRS connector 1/8 in/3.
If equipped with an additional connection of the music player in the mobile phone, connect the phone by means of the snap-in adapter*, refer to page 233. The phone can then be used for the hands-free system and audio playback. The audio playback is only possible if no device is connected to the USB audio interface. The common audio files, e.g. MP3, WMA, WAV (PCM) and AAC, as well as playback lists in the M3U format can be played back.
USB audio interface Starting audio playback Via programmable memory buttons Via iDrive You can save the "USB" function on the programmable memory buttons. To start audio playback, refer to page 21. If the audio device has a device name, this will be displayed if possible. 1. Press the button. This opens the start menu. Selecting a track 2. Move the controller backwards to open "Entertainment". You can call up the tracks via the playback lists and information.
1. Select the current track and press the controller. Do not subject the audio device to extreme environmental conditions, e.g. extremely high temperatures, refer to the operating manual of the audio device. Otherwise the audio device may be damaged, impairing driving safety while driving.< 2. Select "Repeat track" and press the controller. Depending on the configuration of the audio files, e.g. bit rates greater than 256 Kbit/s, proper playback cannot always be ensured.
DVD system in rear DVD system in rear* With the DVD system in the rear you can play CDs and DVDs with audio, video and image data. External audio and video devices can also be connected and played via the DVD system in the rear. Tone output is possible both via headphones and via the vehicle speakers. Controls You can operate the DVD system in the rear with the buttons on the CD/DVD player or with the remote control. Some functions can only be operated with the remote control.
Ask your BMW Sports Activity Vehicle Center which infrared headphones are supported by the infrared interface.
DVD system in rear > Press the button: Activating menu item. 3. Select "AUX / Rear" and press the controller. Changing batteries 1. Press the detent and remove the cover. 2. Change the batteries. The type and installation position are marked on the bottom of the battery compartment. Switching DVD system on/off Press the button on the CD/DVD player. The DVD system switches on automatically when a CD or DVD is inserted. 3. Close the cover.
2 Japan, Europe, Middle East, South Africa 1. Press the button on the remote control during playback. 3 Southeast Asia 4 Australia, Central and South America, New Zealand 5 Northwest Asia, North Africa 6 China > Playback usually begins automatically after a few seconds. 3. Press the > If playback does not begin automatically: Select "DVD". Press the button. 2.
DVD system in rear 3. Press the Freeze frame button. 4. Press the button several times to increase the fast forward/reverse speed. 1. Press the button on the remote control during playback. The DVD playback will be distorted. To cancel fast forward/reverse: 1. Select the symbol. 2. Press the button. Or: Press the button on the CD/DVD player. The DVD will start play at the point selected. Forward/reverse with remote control 2. Select the Press and hold the the desired point. 3.
> "Zoom": full-screen playback button. On some DVDs, selecting "Menu" and "Title" gives you the option of choosing from additional menus.< > "Language": Language or sound track of DVD playback. The language advances one setting each time the menu item is selected. To make a selection: > "Subtitles": Language of subtitles "00 n/a": no subtitles. 2. Press the > "Title": Selection of a single track of the DVD.
DVD system in rear > "Repeat track": Repeat the selected track. 3. Select a track. > "Repeat directory": Repeat the tracks in the current directory. 4. Press the button. Playing audio tracks from CD/DVD 4. Press the button. 5. Select "Play". Starting playback Push the CD/DVD into the drive with the labeled side facing upward. The CD/DVD is automatically pulled in. > Playback begins automatically after a few seconds. > If playback does not begin automatically: Select "CD". Press the button. 6.
Press the button for the corresponding direction repeatedly or turn the serrated dial until you reach the desired track. Playback begins at the start of the track. > "Random": In this mode, the tracks on the CD/DVD are played once in a random sequence. > "Scan": Automatically briefly sample all tracks of the CD/DVD consecutively. > "Repeat": Repeat the current track. Select again to end. Fast forward/reverse Buttons on the CD/DVD player: Press and hold the sponding direction.
DVD system in rear > "Tone": 3. Select a track. > "Treble / Bass" and "Balance": Separately adjustable for the left and right-hand headphones and the infrared headphones. > "Reset": The settings are reset to the default value. > "Pause": Stop or continue playback. 4. Press the button. To change the directory: 1. Select the directory. > "Scan directory": Briefly sample the tracks in the current directory. > "Scan all": Briefly sample all tracks.
Adjusting 1. Select the subdirectory if necessary. 1. Press the At a glance Displaying overview button. 4. Scroll through the overview with the menu guidance of the remote control. Function Return to the photo menu "SET" If a symbol is shown instead of an image, the image cannot be shown in the overview.< "Display": adjusting the brightness of the screen. "Language": the language of the system can be set after changing to the top field Start slide show. Displaying images 1.
DVD system in rear Information on CD/DVD player To play the information on the other side, turn over the DVD. Supported formats Safety notes The BMW CD/DVD player is a Class 1 laser product. Do not operate if the cover is damaged or open, otherwise severe eye damage can result.< Depending on the compression method used, not all files of the specified formats can be opened.
External device High levels of humidity can lead to condensation on the CD/DVD or the laser's scan lens and temporarily prevent playback. Connecting At a glance Humidity Malfunctions with individual CDs/DVDs 2 Power supply for external device: sockets with removable cap, also refer to page 129 Only label CDs/DVDs on the side with the label using a pen intended for this purpose. Damaged CDs/DVDs Avoid fingerprints, dust, scratches and moisture. Store CDs/DVDs in a sleeve.
DVD system in rear Settings for external devices 1. Press the button during playback. > "Video Format": > "Standard" > "Zoom": full-screen playback 2. Make the settings with the remote control: > "Video settings": > "Brightness", "Color" and "Contrast" of video playback. > "NTSC color": The color can be adjusted on an external device with the NTSC standard. > "Standard": The DVD system in the rear can be adapted to external devices with various TV standards.
217 Reference Online Edition for Part no.
Online Edition for Part no.
Communications This chapter summarizes how to operate your mobile phone using iDrive or voice control and how to use BMW Assist or BMW TeleServices. Online Edition for Part no.
Telephoning Telephoning* The concept Your BMW is equipped with a full mobile phone preparation package. After pairing a suitable mobile phone in the vehicle once, you can operate the mobile phone via iDrive, with the buttons on the steering wheel and by voice. Once a mobile phone has been paired in your vehicle, it is automatically recognized as soon as it is inside the vehicle while the engine is running or the ignition is switched on.
1. Insert the remote control as far as possible into the ignition lock. 2. Switch on the ignition by pressing the Start/ Stop button without depressing the brake pedal. Preparation via iDrive Commissioning Pairing mobile phone in vehicle iDrive, for operating principle refer to page 16. 3. Press the menu.
Telephoning 7. Change into the second field from the top, select "Phone" and press the controller. Preparation with mobile phone 10. Additional operations must be carried out on the mobile phone and differ depending on the model, refer to the operating instructions of your mobile phone, e.g. find, connect or pair under Bluetooth device. The Bluetooth name of the vehicle is also shown on the mobile phone display. 11. Select the Bluetooth name of the vehicle on the mobile phone display. 8.
1. Select "Restart pairing" and press the controller. Controls If not all phone book entries are displayed: > Transfer all phone book entries from the SIM card to the mobile phone if necessary. > It may not be possible to display phone book entries with special characters. Up to four mobile phones can be paired consecutively. When you pair a fifth mobile phone, the pairing data of the mobile phone for which the pairing data were stored first in the vehicle will be deleted.
Telephoning List of paired mobile phones The mobile phones for which the vehicle has stored the pairing data can be displayed. If several paired mobile phones are detected by the vehicle simultaneously, you can operate the mobile phone highest up in the list via the vehicle. 7. Select "Move device up" and press the controller. You can change the order of the mobile phones in the list. As long as a mobile phone is selected in this list, the mobile phones cannot be operated via the vehicle.
> Select the desired mobile phone and press the controller. 4. Select "Bluetooth" and press the controller. At a glance 3. Select "Settings" and press the controller. Activating/deactivating Bluetooth link The Bluetooth link is activated. The Bluetooth link is deactivated. Mobility Bluetooth technology is not approved in all countries. Observe the applicable local regulations. Temporarily deactivate the Bluetooth link between the vehicle and the mobile phone if necessary.
Telephoning Adjusting volume To optimize the speech quality during a call, we recommend that you: > Reduce background noises, e.g. by closing the windows, reducing the air volume of the automatic climate control or pointing the opened front air vents downward > Reduce volume of hands-free system Requirements Turn the knob during a call to select the desired volume. This volume for the hands-free system is maintained, even if the other audio sources are set to minimum volume.
Rejecting a call Select "Reject" and press the controller. The caller is diverted to your mailbox if it has been activated. At a glance Controls 4. Select "Dial number" and press the controller. Alternative: press the button on the steering wheel. Driving tips "Accept" is selected. Press the controller. Calling For your phone number to be displayed to the person you are calling, the display of phone numbers must be enabled by your service provider.
Telephoning 2. "End call" is selected. Press the controller. Dialing phone numbers from phone book The list "A - Z" is available for your phone book entries. The phone book entries appear on the Control Display. 1. Select "Phone" and press the controller. Dialing a phone number from phone book or a phone number stored in a list Phone numbers you have called, incoming calls and the entries of the phone book are stored in lists when the mobile phone is connected to the vehicle via Bluetooth.
Deleting individual entries 6. Select "Dial number" and press the controller. 1. Select the desired entry from the list and press the controller. Dialing a phone number stored in a list 2. Select "Delete" and press the controller. The entry is deleted. At a glance 5. Change the phone number. To select an entry and establish a connection: Controls 1. Select "Phone" and press the controller. 2. Select list and press the controller: > "Top 8" > "Redial" 2.
Telephoning You can select the displayed service phone number if your mobile phone is paired in the vehicle: This function is available when a connection has been established. 1. Establish connection. iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Move the controller forward to select "Communication". 3. Select "BMW Contact" and press the controller. 2. With a single drive: Press the controller. Select "Keypad" and press the controller.
2. Say the command. Ending/canceling operation by voice From handsfree system to mobile phone When you telephone via the handsfree system, you can also continue the call via the mobile phone if necessary, depending on the mobile phone model. Act according to what is shown on the mobile phone display, refer to the operating instructions of your mobile phone. As an alternative, you can deactivate the Bluetooth link.
Telephoning Example: dialing phone numbers To start the dialog: Press the button on the steering wheel. Command The voice control answers {Dial number} {{Please say the number}} e.g. {123 456 7890} Depending on equipment: {{123 456 7890. Continue?}} or {{123 456 7890.
3. Say the phone number when prompted. 4. To store the phone number: {Save}. Delete entry: You can delete any entry from the voice phone book. 1. {Delete name}. The dialog for deleting an entry is opened. 2. Say the name when prompted. 3. Confirm the prompt with {Yes}. Delete all entries: {Delete phone book} deletes all entries in the phone book. 1. {Delete phone book}. The dialog for deleting phone book is opened. 2. Confirm the prompt with {Yes}. 3. Confirm the repeated prompt with {Yes}. 3.
Telephoning 2. Insert the snap-in adapter in the front and press it downward until it engages. Removing mobile phone Press the button. To remove the snap-in adapter: Press down on region 1. Inserting mobile phone 1. Remove the protective cap from the mobile phone's antenna connector if necessary, so that the mobile phone can engage in the snap-in adapter. 2. Push the mobile phone with the buttons facing upward toward the electrical connections and press down until it engages.
If the following requirements are met, you can use BMW Assist: > The installed BMW Assist system is logged in on a wireless communications network. This network must be capable of transmitting the services. > To transmit position data, the vehicle must be able to determine the current position. > To activate and update BMW Assist, a GPS signal must be available. > You have subscribed to BMW Assist with your BMW Sports Activity Vehicle Center or with the BMW Assist Response Center.
BMW Assist on route planning, traffic conditions, and the weather. With Critical Calling, you can make a limited number of calls via the BMW Assist Response Center, e.g. if you do not have your mobile phone with you. Press the SOS button to contact the BMW Assist Response Center, see below. Roadside assistance iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. You also have access to the BMW Assist concierge service via the Internet.
Automatic BMW Teleservice call* Controls The data on the service status of your vehicle or on required inspections are transmitted automatically directly to your BMW Sports Activity Vehicle Center prior to the due date. You can check when the BMW Sports Activity Vehicle Center was notified. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Info sources" and press the controller. At a glance 6. Select "Auto Request" and press the controller.
BMW Assist 5. Select "Start service" and press the controller. The activated BMW TeleServices services are displayed. The data relevant for service are transmitted. Your BMW Sports Activity Vehicle Center will contact you to set up an appointment for service. 6. "Options" is selected: press the controller. Displaying and updating BMW TeleServices services* 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 7.
Select the received message if necessary and press the controller. Calling up information 2. Move the controller forward to select "Communication". 1. Select "Options" and press the controller. 2. Select a menu item: 4. Select "Concierge" and press the controller. > With "Call" you can establish a telephone connection. A prerequisite for this is that your Bluetooth mobile phone has been paired in the vehicle.
BMW Assist 3. Turn the controller until "Settings" is selected and press the controller. Requirements > Make sure that the vehicle can determine its current position. Reception is best when you have an unobstructed view to the sky. > Leave vehicle ignition switched on during the activation process. Activating 1. Press the button. This opens the start menu. 4. Turn the controller until "BMW Service settings" is selected and press the controller. 2. Press the controller to open the menu. 3.
At a glance 2. Press the controller to open the menu. Controls 5. Change to upper field if necessary. Turn the controller until "Enabled Assist services" is selected and press the controller. 3. Turn the controller until "Settings" is selected and press the controller. Activation takes a few minutes. The status is displayed on the Control Display. If you open another menu, the activation process continues to run in the background. With BMW Assist activated, you can have the Telematics ID displayed.
Online Edition for Part no.
Mobility This section helps you maintain your mobility by supplying important information on vital topics including fuels and lubricants, wheels and tires, service, maintenance and roadside assistance. Online Edition for Part no.
Refueling Refueling Switch off the engine before refueling. When handling fuel, always observe all applicable precautionary measures and regulations. Never transport reserve fuel containers in the vehicle. These could become leaky and cause an explosion or a fire in an accident.< Releasing manually If an electrical malfunction should occur, you can unlock the fuel filler door manually. 1. Open the right-hand side panel in the cargo bay. 2. Pull the knob with the gas pump symbol.
However, you may also use gasoline with less AKI. The minimum AKI Rating is 87. If you use gasoline with this minimum AKI Rating, the engine may produce knocking sounds when starting at high outside temperatures. This has no affect on the engine life. Do not use gasoline below the specified minimum quality, otherwise engine damage can result.< Use high-quality brands Field experience has indicated significant differences in fuel quality: volatility, composition, additives, etc.
Refueling In order to be able to start the engine in the usual way, there must be a sufficient supply of diesel exhaust fluid in the separate reservoir. Do not drive until the displayed remaining distance runs out. Otherwise, it may not be possible to restart the engine.< System heating Incorrect fueling In order to bring the system to operating temperature after a cold start of the engine, the automatic transmission shifts into the next higher gear at a later point.
Open reservoir for diesel exhaust fluid In order to get your vehicle to reach the nearest BMW Sports Activity Vehicle Center, you may refill the diesel exhaust fluid yourself, making sure to heed the warning notices. 2. Fit releasing tool from onboard tool kit, refer to page 269 into place and open the lock, refer to arrow. Suitable diesel exhaust fluid > Preferred: BMW Diesel Exhaust Fluid. This bottle and its special adapter permit convenient refilling with diesel exhaust fluid.
Refueling Pull bottle back, refer to arrow, and unscrew it. has been driven for a few more minutes, this display will disappear. Closing reservoir After the reservoir is filled, close it again with the releasing tool. After refilling diesel exhaust fluid Incorrect fluid After refilling with the incorrect fluid, e.g. antifreeze for windshield wiper fluid, do not start the engine because this could result in a fire hazard.< Contact your BMW Sports Activity Vehicle Center.
Information for your safety The tables below provide all the correct inflation pressures for the specified tire sizes at ambient temperature. > Tire sizes of your vehicle > Load conditions > Maximum allowable driving speed Tire inflation pressures for speeds up to 100 mph/160 km/h For normal driving up to 100 mph/160 km/h, adjust pressures to the respective tire inflation pressures listed on the following pages in the column Traveling speeds up to max.
Wheels and tires Tire inflation pressures for speeds above 100 mph/160 km/h In order to drive at maximum speeds in excess of 100 mph/160 km/h, please observe, and, if necessary, adjust tire pressures for speeds exceeding 100 mph/160 km/h from the relevant table on the following pages. Otherwise tire damage and accidents could occur.< Observe all national and local maximum speed limits, otherwise violations of the law could occur. 250 Online Edition for Part no.
Tire size Pressure specifications in psi/kPa Traveling speeds up to a max.
Wheels and tires Tire inflation pressures X5 xDrive30i/X5 xDrive48i/X5 xDrive35d with two rows of seats Tire size Pressure specifications in psi/kPa Traveling speeds up to a max. of 100 mph/160 km/h Traveling speeds including those exceeding 100 mph/160 km/h All pressure specifications in the table are indicated in psi/ kilopascal with cold tires.
At a glance Tire inflation pressure X6 xDrive35i Tire size Pressure specifications in psi/kPa Traveling speeds up to a max. of 100 mph/160 km/h Traveling speeds including those exceeding 100 mph/160 km/h Controls All pressure specifications in the table are indicated in psi/ kilopascal with cold tires.
Wheels and tires Tire identification marks Knowledge of the labeling on the side of the tire makes it easier to identify and choose the right tires. Tire size 255/55 R 18 109 H e.g.
You will recognize run-flat tires by a circular symbol containing the letters RSC on the side of the tire, refer to page 256. M+S Winter and all-season tires. These have better winter properties than summer tires. XL Indicates specially reinforced tires. Tire condition Inspect your tires frequently for tread wear, signs of damage and for foreign objects lodged in the tread. Check the tread depth. Minimum tread depth The tread depth should not drop below 0.
Wheels and tires Run-flat tires The right wheels and tires When mounting new tires or changing over from summer to winter tires and vice versa, mount Run-Flat Tires for your own safety. Your BMW Sports Activity Vehicle Center will be happy to advise you. You will recognize run-flat tires by the circular symbol containing the letters RSC on the side of the tire. Run-flat tires consist of partially self-contained tires and special rims.
BMW only tests certain fine-link snow chains, classifies them as road-safe and recommends them. Your BMW Sports Activity Vehicle Center can provide you with this information. Certain tire makes are recommended by BMW depending on the tire size. You can recognize these from the clearly visible BMW marking on the tire sidewall. When used properly, these tires comply with the most demanding standards for safety and vehicle response.
Under the hood Under the hood Never attempt to perform any service or repair operations on your vehicle without the required professional technical training. If you do not know what repair procedures to follow, have work on your vehicle done only by your BMW Sports Activity Vehicle Center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. If this work is not carried out properly, there is a danger of subsequent damage and related safety hazards.
At a glance Engine compartment 2 Starting-aid terminal, refer to page 280 3 Expansion tank for coolant, refer to page 262 4 Filler neck for engine oil, refer to Adding engine oil on page 261 Communications Entertainment Filler neck for washer fluid of the headlamp and windshield cleaning systems, refer to page 75 259 Online Edition for Part no.
Under the hood BMW X6 1 2 Filler neck for washer fluid of the headlamp and windshield cleaning systems, refer to page 75 3 Starting-aid terminal, refer to page 280 4 Expansion tank for coolant, refer to page 262 Filler neck for engine oil, refer to Adding engine oil on page 261 Engine oil The engine oil consumption is dependent on driving style and driving conditions. 3. Select "Info sources" and press the controller.
Adding engine oil 6. Change to the second field from the top if necessary. Turn the controller until "Engine oil level" is selected and press the controller. The oil level is displayed. BMW X6 At a glance 5. Change to upper field if necessary. Turn the controller until "Service requirements" is selected and press the controller. Driving tips Controls BMW X5 If the oil level displayed is below minimum, add engine oil immediately. Failure to do so may lead to engine damage.
Under the hood Approved engine oils The quality of the engine oil has critical significance for the operation and service life of an engine. BMW continuously approves specific oils after confirming their suitability for use in its vehicles with extensive testing. Your BMW Sports Activity Vehicle Center will be happy to answer detailed questions on approved oils.< You can also call BMW of North America at 1-800-831-1117 or visit the website at www.bmwusa.com to obtain this information.
The BMW maintenance system supports the preservation of the traffic and operating safety of your BMW. The service schedule also includes operations related to the vehicle's comfort and convenience features, such as replacement of the filters for the inside air. The ultimate objective is to ensure economical maintenance by providing the ideal service for your vehicle. Should the day come when you decide to sell your BMW, a complete dealer service history will prove to be an asset of inestimable value.
Maintenance Socket for OBD Onboard Diagnostics interface Event Data Recorders Your vehicle may be equipped with one or several measuring and diagnosis modules, or with a device for recording or transmitting certain vehicle data or information. If you have also subscribed to BMW Assist, certain vehicle data can be transmitted or recorded to enable corresponding services. Components which are decisive for the exhaust-gas composition can be checked via the OBD socket with a device.
At a glance Care Do not use cleaners that contain alcohol or solvents; they can damage your vehicle.< Cleaning agents can contain substances that are dangerous or pose health risks. You should therefore heed the warnings and hazard indications on the packaging. Open the doors or windows on your vehicle whenever cleaning the interior. Make sure there is sufficient ventilation in enclosed spaces. Use only products that are formulated for vehicle cleaning.
Care Steam cleaners/high-pressure cleaning jets When using steam cleaners or high-pressure cleaning jets, make sure to maintain a sufficient distance and stay below a maximum temperature of 1407/606. Insufficient distance or excessive pressure or temperature can damage parts of the vehicle or can result in water penetration. Follow the operating instructions for the high-pressure cleaning jets.
A rust film on the aluminum running boards can be removed with a special cleaning agent. Treat the leather twice a year with a leather lotion since dirt and grease harm the protective layer of the leather. Outside sensors/cameras Carpets/cargo bay Keep the sensors and cameras outside the vehicle, e.g. the Park Distance Control or rear view camera, clean and free of ice to ensure their full operability.
Care Safety belts Do not use cleansers to clean the safety belts since this can destroy the webbing.< Inside sensors/cameras Clean inside sensors and cameras, such as those of the high-beam assistant, using a lintfree cloth moistened with glass cleaner. Displays Clean displays like the radio or the instrument cluster using a display-cleaning cloth or a soft, nonabrasive lint-free cloth. Avoid using excessive pressure when cleaning displays; otherwise, you could damage them.
At a glance Replacing components BMW X5: rear Lamps and bulbs Front Lamps and bulbs make an essential contribution to vehicle safety. You must be duly diligent in replacing them. BMW recommends having your BMW Sports Activity Vehicle Center perform any work that you do not feel competent to perform yourself or that is not described here. 2. Swing the wiper blade upward.
Replacing components When performing care and maintenance on the headlamps, please observe the information on page 266. bulb is accidentally damaged during replacement.< 1. Turn the cover to the left and remove. For bulbs for which replacement is not described and for checking and adjusting headlamp aim, please contact your BMW Sports Activity Vehicle Center.
1. Open the side panel in the cargo bay. 2. Remove the first-aid kit* and warning triangle* if necessary. Fold up the insulation. 3. Rotate the bulb socket to the left and remove. 2 Brake force display 3 Turn signal 4 Brake lamp/rear lamp/side marker lamp 5 Backup lamp 6 Brake lamp 4. Apply gentle pressure to the bulb while turning it to the left for removal and replacement. 5. Remount the side panel. Backup lamp 1. Open the side panel in the cargo bay. Brake lamp 1.
Replacing components Brake force display 1. Carefully remove the cover in the liftgate panel with a screwdriver. 6. Position the cargo bay lamp and clip it in, refer to arrow. License plate lamp 2. Rotate the bulb socket to the left and remove. 3. Apply gentle pressure to the bulb while turning it to the left for removal and replacement. 4. Insert the bulb socket in the liftgate and engage it. 5. Before installing the cap, unclip the cargo bay lamp.
4. Install in the reverse order. Have work on the xenon light unit including changing the bulb carried out only by your BMW Sports Activity Vehicle Center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Due to the high voltage present in the system, there is a danger of fatal injuries when work is carried out improperly.< Side marker lamps 5-Watt bulb, WY5W XLL 35-Watt bulb, H8 Turn signals, front 24-Watt bulb, PY24W 1.
Replacing components shop that works according to BMW repair procedures with correspondingly trained personnel. 3. Remove bulb holder along with bulb and replace. Arrangement of tail lamps 4. Install in the reverse order. 1 Brake force display/rear lamps 2 Brake lamp/rear lamp 3 Backup lamp 4 Turn signal Backup lamp 1. Open the side panel in the cargo bay. 2. Remove the first-aid kit* and warning triangle* if necessary. 3. Remove bulb holder along with bulb and replace. Brake lamp 1.
Your BMW is equipped with run-flat tires as standard. As a result, it is not necessary to change the wheel immediately in the case of air loss in the event of a breakdown. At a glance Changing wheels You will recognize run-flat tires by a circular symbol containing the letters RSC on the side of the tire, refer to Run-flat tires, page 256. 5. Replace the cover. License plate lamp 5-Watt bulb, C5W 1. Slide the lamp to the right with a screwdriver, refer to arrow 1.
Replacing components far as possible from passing traffic and on solid ground. Switch on the hazard warning flashers. Set the parking brake and engage transmission position P. Have all vehicle occupants get out of the vehicle and ensure that they remain outside the immediate area in a safe place, such as behind a guardrail. If a warning triangle* or portable hazard warning lamp* is required, set it up on the roadside at an appropriate distance from the rear of the vehicle.
Mounting a wheel 1. Unscrew the lug bolts and remove the wheel. 2. Remove accumulations of mud or dirt from the mounting surfaces of the wheel and hub. Also clean the lug bolts. 3. Position the new wheel or compact wheel. Secure the wheel by screwing at least two lug bolts into opposite bolt holes. When you mount wheels other than Genuine BMW light-alloy wheels, different lug bolts may also be required. 4. Screw in the remaining lug bolts. Tighten all the bolts securely in a diagonal pattern. 5.
Replacing components Vehicle Center or bring them to a collection point. Maintain the battery in an upright position for transport and storage. Always restrain the battery to prevent it from tipping over during transport.< Power failure In interior The fuses are located in the front passenger footwell on the underside of the instrument cluster. 1. Unscrew screws, refer to arrows, of footwell trim panel. Following a temporary power failure, e.g.
> BMW Assist is activated. Activating BMW Assist, refer to page 240. > Radio readiness is switched on. > The BMW Assist system is logged in on a wireless communications network. > The emergency request system is operable. When the contract of participation with BMW Assist expires, the BMW Assist system can be deactivated by a BMW Sports Activity Vehicle Center without having to visit a workshop. Once the BMW Assist system has been deactivated, emergency requests are not possible.
Giving and receiving assistance replace the contents concerned in good time if necessary. can also use the same method to help start another vehicle. Use only jumper cables with fully-insulated clamp handles. BMW X5 To avoid the risk of potentially fatal injury, always avoid all contact with electrical components while the engine is running. Carefully adhere to the following sequence, both to prevent damage to one or both vehicles, and to guard against possible personal injuries.< Preparation 1.
4. Attach one end of the jumper cable minus/– to the negative terminal of the battery or to an engine or body ground of the assisting vehicle. Your BMW has a special nut as body ground or negative pole. Using tow fitting The screw-on tow-fitting must always be carried in the vehicle. It can be screwed in at the front or rear of the BMW. It is located in the toolkit under the floor panel flap in the cargo bay, refer to page 269. Use only the tow fitting provided with the vehicle and screw it all the way in.
Giving and receiving assistance Being towed Make sure that the ignition is switched on, refer to page 65, otherwise the low beams, tail lamps, turn signals and windshield wipers would not be available. When the engine is stopped, there is no power assist. This then requires increased effort for braking and steering. Active steering is deactivated and larger steering wheel movements are required.< Switch on the hazard warning flashers depending on the local regulations.
283 Reference Online Edition for Part no.
Online Edition for Part no.
Reference This chapter contains the technical data, the short commands of the voice activation system, and the index that will direct you as quickly as possible to the information you are looking for. Online Edition for Part no.
Technical data Technical data Engine data BMW X5 Displacement cu in/cmμ No. of cylinders Maximum output hp at engine speed rpm Maximum torque lb ft/Nm at engine speed rpm BMW X6 Displacement cu in/cmμ No. of cylinders Maximum output hp at engine speed rpm Maximum torque lb ft/Nm at engine speed rpm X5 xDrive30i X5 xDrive48i X5 xDrive35d 182.8/2,996 292.9/4,799 182.
At a glance Dimensions Communications Entertainment Navigation Driving tips Controls BMW X5 All dimensions given in inches/mm. Smallest turning circle diam.: 42.0 ft/12.8 m 287 Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG Reference Mobility With mixed tires* the vehicle width may exceed the specified dimension.
Technical data BMW X6 All dimensions given in inches/mm. Smallest turning circle diam.: 42.0 ft/12.8 m Height with roof rack*: 66.9 in/1,699 mm With mixed tires* the vehicle width may exceed the specified dimension. 288 Online Edition for Part no.
lbs./kg 6,327/2,870 6,537/2,965 6,614/3,000 without 3rd row seats lbs./kg 6,008/2,725 6,173/2,800 6,294/2,855 Load lbs./kg 1,290/585 1,290/585 1,290/585 without 3rd row seats lbs./kg 1,102/500 1,102/500 1,102/500 Approved front axle weight lbs./kg 2,767/1,255 3,020/1,370 3,064/1,390 without 3rd row seats lbs./kg 2,778/1,260 3,020/1,370 3,064/1,390 Approved rear axle weight lbs./kg 3,803/1,725 3,869/1,755 3,858/1,750 without 3rd row seats lbs.
Technical data Capacities BMW X5 Notes Fuel tank US gal/liters approx. 22.5/85 X5 xDrive30i, X5 xDrive35d US gal/liters approx. 2.1/8 X5 xDrive48i US gal/liters approx. 2.6/10 Windshield washer with headlamp washer system US quarts/liters approx. 6.9/6.5 Fuel grade: page 245 of that reserve For more details: page 75 BMW X6 Notes Fuel tank US gal/liters approx. 22.5/85 X6 xDrive35i US gal/liters approx. 2.1/8 X6 xDrive50i US gal/liters approx. 3.
Assistance window Function Command To open assistance window 20 {Assistance window} To select display in assistance window 20 {Assistance window map facing north}, {Assistance window map direction of travel}, {Assistance window arrow display}, {Assistance window perspective}, {Assistance window current position}, {Assistance window trip computer} or {Assistance window onboard info} To change scale in assistance window 164 {Assistance window scale ... feet} or {Assistance window scale ...
Short commands of voice activation system Navigation Function Command To open navigation system 150 {Navigation} To open "Enter address" 151 {Enter address} To open "New destination" 151 {New destination} To display "Input map" 155 {Input map} To display destination list 157 {Destination list} To display address book 158 {Address book} To display route criteria 160 {Route preference} To start destination guidance 162 {Start guidance} To end destination guidance 162 {Stop guidance} To di
At a glance Entertainment Command {Audio} To switch on radio 178 {Radio on}, {FM} or {AM} To open "FM" 178 {FM menu} To open "AM" 178 {AM menu} To open "All stations" 178 {FM All stations} To select radio station 178 {Station ...}, e.g.
Short commands of voice activation system Climate Function Command To adjust temperature distribution for front seat heating 56 {Seat heater distribution} To open "Vent settings" 117 {Vent settings} To open "Automatic programs" 115 {Automatic programs} To open "Parked car ventilation" 121 {Parked car operation} To open "Automatic ventilation" 121 {Automatic ventilation} To display activation times 122 {Activation time} menu Function Command To open the menu {Settings menu} "Display off" 2
295 Reference Online Edition for Part no.
Everything from A to Z Everything from A to Z Index "..." Identifies Control Display texts used to select individual functions, and indicates where to find them in the text.
297 Online Edition for Part no.
Everything from A to Z "BMW Assist" 236, 237, 238, 239 BMW Assist – activating 240 – concierge service 239 – contacting BMW Customer Relations 238 – offered services 235 – roadside assistance 236 – TeleServices 237 "BMW Contact" 230 "BMW Contact Numbers" 230 BMW homepage 4 BMW maintenance system 263 "BMW Service settings" 241 BMW Teleservice call – automatic 237 – manual 237 BMW TeleServices 237 BMW TeleServices services – displaying 238 – updating 238 BMW website 4 Bottle holder, refer to Cup holders 127
299 Online Edition for Part no.
Everything from A to Z Compartments, refer to Storage compartments 127 Compass, digital 124 Computer 80 – displays in instrument panel 80 – displays on Control Display 80 – trip computer 81 "Concierge" 239 Concierge service 239 Condition Based Service CBS 263 "Confirmation" 31 Connecting car vacuum cleaner, refer to Connecting electrical devices 129 Connecting headphones 205 Consumption, refer to Average fuel consumption 80 Consumption indicator, energy control 79 Consumption statistics, refer to Average f
301 Online Edition for Part no.
Everything from A to Z Dynamic Performance Control 97 "Dynamic route" in navigation 161 Dynamic Stability Control DSC 96 Dynamic Traction Control DTC 97 E Easy entry/exit 58 Eject button, refer to Buttons on the CD player 174 Electrical malfunction – automatic transmission with Steptronic 72 – door lock 32 – driver's door 32 – fuel filler door 244 – glass sunroof, electric 46 – liftgate 33 – panorama glass sunroof 44 – parking brake 69 Electric seat 49 Electronic brake-force distribution 96 Electronic oil
303 Online Edition for Part no.
Everything from A to Z Height adjustment – seats 49 – steering wheel 58 High beams 73, 112 – headlamp flasher 73 – indicator lamp 13 High Definition Radio 181 High-pressure cleaning jets 266 Highs, refer to Treble and bass 175 High water, refer to Driving through water 140 Highway, refer to Route criteria 160 Hill Descent Control HDC 98 Hills 140 Holder for cups 127 Home address 160 "Home address" in navigation 160 Homepage 4 Hood 258 Horn 10 Hot exhaust system 139 "Hour memo" 88 "House number" for destina
Keyless-Go, refer to Comfort access 39 Keyless opening and closing, refer to Comfort access 39 Key Memory, refer to Personal Profile 28 "Keypad" 230 Keys 28 – key-related settings, refer to Personal Profile 28 Kick-down, automatic transmission with Steptronic 71 Knock control 245 L Lamps, refer to Parking lamps/ low beams 110 Lamps and bulbs 269 "Language / Units" 89, 90 – for navigation 149 "Language" for DVD system in rear 208, 209 "Languages" 90 – for navigation 149, 165 Lashing eyes, refer to Securing
Everything from A to Z Malfunction warnings, refer to Check Control 85 Manual air distribution 116 Manual BMW Teleservice call 237 "Manual" in radio mode 179 Manually releasing transmission lock 72 Manual mode, automatic transmission with Steptronic 71 Manual operation – door lock 32 – driver's door 32 – fuel filler door 244 – transmission lock, automatic transmission 72 Map – changing scale 164 – destination entry 155 "Map direction of travel" 164 "Map facing north" 164 Map facing north 164 Master key, re
P Panic mode 30 Panorama glass sunroof 42 – moving manually 44 – power failure 44 – raising, opening, closing 43 Park Distance Control PDC 91 "Parked car operation" 121 "Parked car ventilation" 121 Parked-car ventilation 121 – activating activation time 122 – preselecting activation times 122 – switching on and off directly 121 Parking, vehicle 66 307 Online Edition for Part no.
Everything from A to Z "Play" – for DVD system in rear 210 – in Satellite radio mode 185 Playing videos, DVD system in rear 206 Plug-in unit for remote control, refer to Ignition lock 65 Position – displaying 169 – storing, refer to Storing current position 158 Power failure 278 Power windows, refer to Windows 41 Preselecting activation times of parked-car ventilation 122 "Presets" – displaying in radio mode 178 – in Satellite radio 185 Pressure, tires 249 Pressure monitoring of tires, refer to TPM Tire Pr
309 Online Edition for Part no.
Everything from A to Z Scan – CD changer 189 – CD player 189 – radio 179 "Scan all" – for DVD system in rear 212 – in audio mode 189 "Scan directory" – for DVD system in rear 212 – in audio mode 189 Screen, refer to iDrive 16 Screw thread for tow fitting 281 SDARS, refer to Satellite radio 184 "Seat heater distribution" 56 Seat heating 55, 56 Seats 49 – adjusting 49 – adjusting electrically 49 – adjusting manually 49 – backrest width 50 – heating 55, 56 – in rear 53 – lumbar support 50 – memory, refer to S
311 Online Edition for Part no.
Everything from A to Z 3rd row seats 54 Tightening torque of the lug bolts, refer to After mounting 277 Tilt alarm sensor, switching off 39 Tilting down passenger-side exterior mirror 58 "Time / Date" 88 "Time format" 89 Timer, refer to Preselecting activation times 122 "Timer 2" for parked-car ventilation 122 "Timer 1" for parked-car ventilation 122 Tire inflation pressures 249 – checking 249 – monitoring, refer to Flat Tire Monitor 100 Tire Pressure Monitor TPM 101 Tire Quality Grading 254 Tires – age 25
W Warning lamps, refer to Indicator and warning lamps 13 Warning messages, refer to Check Control 85 Warning tone, volume 90 Warning triangle 279 Warranty and Service Guide Booklet for Canadian models 263 313 Online Edition for Part no.
Everything from A to Z Winter diesel 245 Winter tires 257 – storage 257 "With highways" in navigation 160 Word matching principle for navigation 161 Working in the engine compartment 258 Wrenches/screwdrivers, refer to Onboard toolkit 269 X xDrive 97 Xenon lamps 272 – bulb changing 272 Xenon light 270 – bulb changing 270 Z "Zoom" for DVD system in rear 209 314 Online Edition for Part no.
More about BMW The Ultimate Driving Machine 01 41 2 600 809 ue bmwusa.com *BL2600809009* Online Edition for Part no.
