Operating Instructions BNR1841 Technical Manual.indd 10/18 BNR1841 Hand Held Drywall Sanding Machine Please read this manual carefully before using this machine to make sure you are familiar with all safety and warning instructions.
OPERATION INSTRUCTION Machine Call-Outs Please read this manual carefully before using this machine to make sure you are familiar with all safety and warning instructions.
Page | 3
Page | 4
TECHNICAL SPECIFICATIONS Model Number BNR1841 Voltage 120V~, 60Hz Power 6A 720W Rotation Speed 1500-2700 min-1 Round Sanding Pad.ø 7” (180mm) Protection class Class II Double Insulated of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. • Use personal protective equipment. Always wear eye protection.
• likely to bind and are easier to control. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
a) Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The operator can control torque reactions or kickback forces, if proper precautions are taken. cause allergic reactions and/or respiratory diseases to the operator or bystanders); wear a dust mask and work with a dust extraction device when operating.
• Adjust the speed by turning the speed wheel (B), user can choose different speeds for different sanding surfaces. • A higher setting is suitable for sanding with finegrained sanding papers to achieve a fine finishing. MAINTENANCE / SERVICE • Store the tool in its protective case in a dry and secure place, out of reach of children • Always keep tool and cord clean (especially ventilation slots).
