~ Product Manual ~ BN Professional Material Mixers BNR6169 BNR6402K BNR6400 BNR7000 Page 1 BN Products - USA Mixer Manual 2017.
PRODUCT DESCRIPTION From low-viscosity paints to high-viscosity mortars these electric mixers will get your job done quicker, safer and easier than a conventional ½” drill motor. The ergonomically designed handles and the variable 2-speed motor with softstart make the job quicker, safer and easier. The heavy-duty gearbox and high-torque motor will outlast a standard ½” drill motor by 3-4 times.
SPECIFICATIONS TECHNICAL DATA BNR6169 BNR6400 BNR7000 BNR6402K Power 1050W / 9 Apms 1.4Hp Voltage 120V / 60 Hz 1800W / 15 Amps / 2.4Hp 1400W/11.7 Amps/1.9 Hp 1800W / 15 Amps / 2.4 Hp 1 2 1 2 1-600 rpm 150 - 300 rpm 270-460 rpm 18-460 / 300-700 rpm Number of Gears No-Load-Speed 120V / 60 Hz Protection/ Class of Protection Certification Thread for Fixing the Paddle Mixing Paddle (CD max.
• • Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Use the power tool, accessories and tool bits in accordance with these instructions, taking into account the working conditions and the work to be performed.
The switch position enables you to work at high or low speeds. The gear switch position should only be changed when the unit is stopped in order to prevent the gearing from being damaged. 1st gear - Upper position 2nd gear- Lower position • • • • • • • • CORRECTIVE ACTION IN CASE OF FAILURE The operating switch is switched on, but the motor is not working. • • Wires in the electric plug or in the socket are loose. Have socket and plug checked or repaired or replaced. The switch is faulty.
BNR6169 Material Mixer PARTS LIST (BNR6169) Part DESCRIPTION BNR6169-01 Output shaft BNR6169-02 Semi-circular key 3×3.7×10 BNR6169-03 Screw ST 4.
BNR7000 Material Mixer NO. ITEM NO. DESCRIPTION QTY. NO.
BNR6400 Material Mixer Page 8 BN Products - USA Mixer Manual 2017.
BNR6400 Material Mixer NO. ITEM NO. DESCRIPTION 1 BNR6402KP-01 RIGHT HANDLE 1 LEFT HANDLE 1 2 QTY. 3 BNR6400-03 SCREW ST3.9X20 6 4 BNR6400-06 CLAMP 1 5 BNR6400-07 SCREW ST3.
BNR6402K Material Mixer Page 10 BN Products - USA Mixer Manual 2017.
BNR6402K Material Mixer NO. 1 ITEM NO. DESCRIPTION QTY. 38 BNR6402K-39 REVERSE SHAFT 1 RIGHT HANDLE 1 39 BNR6402K-40 SAFETY RING Ø26 1 LEFT HANDLE 1 40 BNR6402K-41 REVERSING SLIDING GEAR 1 2 BNR6402KP-01 3 BNR6402K-03 SCREW ST3.9X20 6 41 BNR6402K-42 BEARING 6000 ZZ 1 4 BNR6400-02 CLAMP 1 42 BNR6402K-43 NEEDLE BEARING HK0810 1 5 BNR6402K-05 SCREW ST3.
Paddles for the BN Power Mixers BNRA0315 1/2” Drill Chuck BNR001 Specify Diameter 120 mm (4.75”) or 140 mm (5.50”) or 160 mm (6.30”) • Overall length: 60 cm (24”) • Designed for plasters, adhesive mortars, mortars, tile adhesives and fillers, best for sticky and viscous materials. • Material Flow: Bottom to Top • Connection: M14 x 2 male threads BNR002-57 Diameter: 57 mm (2.25”) • Overall length: 13.5” • Designed for paints, lacquers, thin coatings, and ready-mix plaster.